Gigabyte G1 Gaming 470 4GB, Hynix, (1260/1820, 950-1030 mV, timings from 1375), v8, i6: 724 / 4 = 181 H/s stable
Up to 188-189 H/s average with core overclocking.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 486. (Read 3839163 times)
the HD 7870 is based from the AMD Pitcairn family of chips. The AMD 7870, AMD8870 and AMD 270x are the same chip but with different DirectX requirments.. The AMD HD 7750 is from the Cape Verde chips which is only 512 shaders in therory should be at 40s/h using V8 on zcash if you have the 2gb verison
My 7770s (1 GB) are doing 53 sol/s right now.
The R7 370 is pretty much the same thing as the 7870 or a refit of the 270 . i had a 7870 i throw a way just before Zcash came out had i known then when i know now that 7870 would be back in service and not at the dump wasting a way or were ever it went in the thrash .
99% you need to plug a monitor in that card because it stays at ULP frequencies (for RX it is 300/300).
After that, you can unplug it and it won't happen again.
the HD 7870 is based from the AMD Pitcairn family of chips. The AMD 7870, AMD8870 and AMD 270x are the same chip but with different DirectX requirments.. The AMD HD 7750 is from the Cape Verde chips which is only 512 shaders in therory should be at 40s/h using V8 on zcash if you have the 2gb verison
My 7770s (1 GB) are doing 53 sol/s right now.
Tonga is really not optimized
Tonga it's the problem, by itself...
It was close to be a scam, from amd...
They said Tonga was going to replace the aged Tahiti.... but they were just kiddin'
Tonga is really not optimized
anyone can tell me real watt on 390x from the wall (stock clock not oc'ed) and watt from gpuz?
2Gb version not necessary,
I have HD7850 1Gb it work fine 95sol on v8
I have HD7850 1Gb it work fine 95sol on v8
Hmmm, guess I should try at least one of my 7750s then.
For that matter, I'll have to see what it does on the A10-7860K in the rig I'm currently working on.
6 * 7790 1GB 65-70 H/s each 405 H/s total !
2Gb version not necessary,
I have HD7850 1Gb it work fine 95sol on v8
I have HD7850 1Gb it work fine 95sol on v8
Hmmm, guess I should try at least one of my 7750s then.
For that matter, I'll have to see what it does on the A10-7860K in the rig I'm currently working on.
v8.0:
- improved speed by about 15-25% (depends on card model). Up to 300H/s on stock 390X.
- added "-i 5" and "-i 6" values, 1-2% speedup, but can be unstable in some cases.
- now remote management is working in read-only mode by default.
- some bug fixes and minor improvements.
- improved speed by about 15-25% (depends on card model). Up to 300H/s on stock 390X.
- added "-i 5" and "-i 6" values, 1-2% speedup, but can be unstable in some cases.
- now remote management is working in read-only mode by default.
- some bug fixes and minor improvements.
We are waiting v.9))))) Would you do that version or will be waiting for other miners?
and Rx4.. card... can it surprise us?
Upgrades are worthless (imho)
It was the great stuff at the beginning, but currently, with the current network hashrate is pointless...
you just get a few bucks (or cents) more ,for a 6 - 12 hours lapse, until all the network is updated to the latest version, and the diff stabilizes again, and you start getting the same income...
but it's great to see how developers are working nowadays on their sw, the dev fees are juicy.. and they deserve it.
It's like old btc days.
note: let claymore take a breath (for a few days)..
Windows 10
6x470 MSI frozr average 175h/s
total rig - 1045h/s
6x470 MSI frozr average 175h/s
total rig - 1045h/s
7x Rx 480 Nitro =1410 sol
v8.0:
- improved speed by about 15-25% (depends on card model). Up to 300H/s on stock 390X.
- added "-i 5" and "-i 6" values, 1-2% speedup, but can be unstable in some cases.
- now remote management is working in read-only mode by default.
- some bug fixes and minor improvements.
- improved speed by about 15-25% (depends on card model). Up to 300H/s on stock 390X.
- added "-i 5" and "-i 6" values, 1-2% speedup, but can be unstable in some cases.
- now remote management is working in read-only mode by default.
- some bug fixes and minor improvements.
We are waiting v.9))))) Would you do that version or will be waiting for other miners?
and Rx4.. card... can it surprise us?
Genoil 0.6.2 Released miner. Is it worth it to pay attention to it or speed it remained at the same level
Anyone minining with msi r9 380 how much h/s can i get with this newest version? Dont know is it worth switching from eth to zec. As zec again on over 100 usd...
If you read a few pages back, you will find the answer.
but in the future will be in linux OS?
Anyone minining with msi r9 380 how much h/s can i get with this newest version? Dont know is it worth switching from eth to zec. As zec again on over 100 usd...
v7, driver 16.11.2, -i 4
Win 7 64bit
290 1000/1250 - 217 Sol/s ~180W
280 1000/1500 - 150 Sol/s ~130W
Win 8.1 64bit
370 1175/1500 - 98 Sol/s
Win 7 64bit
290 1000/1250 - 217 Sol/s ~180W
280 1000/1500 - 150 Sol/s ~130W
Win 8.1 64bit
370 1175/1500 - 98 Sol/s
v8, -i 6
290 from 217 to 274 Sol/s ~200W
280 from 150 to 190 Sol/s ~140W
370 from 98 to 128 Sol/s
v8 -i 3 power usage seems to be about the same as with -i 4 on v7 so the new version is ~25% more power efficient.
Intensity 3-4 seem to be the best - only a bit slower than 5 and 6, but 5 consumes more watts and 6 even much more
280 290 whole PC watts (baseline is 103W without mining)
-i 0 179 254 409
-i 1 181 254 410
-i 2 185 264 416
-i 3 187 271 419
-i 4 188 272 423
-i 5 189 273 429
-i 6 190 274 443
1280. I started undervolting with 1075v, now I am at 1025v... I dont think it can go any lower. 1000gpu/1450mem. its stable for last 24h.
thanks for the info, i'll test it with my rig
currently i'm 115h/s at 1080/1500mhz...
Hey guys,
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10
for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10
for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
Did you updated your drivers? that could be the problem... if you did, try cleaning up with DDU.
I heard that w10 is the worst OS for our "hobby"... and also for privacy.
sometimes helps if you reset radeon settings. gaming/global settings.
Jump to: