Tonga is crap. It will never beat Tahiti.
Pitcairn and Tonga have same 256 bit membus, almost similar hashrates but very different number of sp's.
I'm sure Tonga can be close to 7950 at least.
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 488. (Read 3839398 times)
Pitcairn and Tonga have same 256 bit membus, almost similar hashrates but very different number of sp's.
I'm sure Tonga can be close to 7950 at least.
Tahiti cards, 2048 sp ~ 200 h/s
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Just a correction:
pitcairn have 1024sp, as i know.
7850 - yes.
But 7870, 270x, and 370x aslo based on pitcairn and have 1280 sp's.
Proof
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
This is because RX4x0 cards need at least one monitor connected to the rig. You can use an hdmi dummy plug (from $9 to $15)I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
or get teamviewer and access from another pc.
you still need a plug to see the gpu temperatue and fan speed even if you log in with teamviewer
Try afterburner or trixx while connected with teamviewer as each program offers real time data on clock, fan speed, power consumption, etc.
Anyone got bios and settings for Sapphire RX470 OC 4GB Hynix ?
I currently have mine at 1375 straps up.
Auto GPU with slightly lowered voltage tailor made per card and 1900/1000 -i 4
Getting between 165 and 180 sols.
I currently have mine at 1375 straps up.
Auto GPU with slightly lowered voltage tailor made per card and 1900/1000 -i 4
Getting between 165 and 180 sols.
Tonga was crap since the beginning, and his "powerfull" r9 285.
tahiti4life
------------------------------------
Someone can confirm the power draw of r7 370 @zec?
and, there's some way o reduce it? (undervolt, mem straps?)
Thanks.
tahiti4life
------------------------------------
Someone can confirm the power draw of r7 370 @zec?
and, there's some way o reduce it? (undervolt, mem straps?)
Thanks.
Tahiti cards, 2048 sp ~ 200 h/s
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Tonga is crap. It will never beat Tahiti.
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
This is because RX4x0 cards need at least one monitor connected to the rig. You can use an hdmi dummy plug (from $9 to $15)I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
or get teamviewer and access from another pc.
you still need a plug to see the gpu temperatue and fan speed even if you log in with teamviewer
Tahiti cards, 2048 sp ~ 200 h/s
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Just a correction:
pitcairn have 1024sp, as i know.
Someone can confirm the power draw of r7 370 @zec?
and, there's some way o reduce it? (undervolt, mem straps?)
Thanks.
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
This is because RX4x0 cards need at least one monitor connected to the rig. You can use an hdmi dummy plug (from $9 to $15)I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
or get teamviewer and access from another pc.
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
This is because RX4x0 cards need at least one monitor connected to the rig. You can use an hdmi dummy plug (from $9 to $15) I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
inhave the same issue...for me it's between a card going bad or drivers or motherboard. The temp most likely is card going bad or thermal paste not making good contact. After that is drovers. My mobo also has issues running more than 2 cards unfortunately :/ I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
In case someone wnats 5% extra coins, there's a 0% fee and 5% bonus black friday on https://zcl.suprnova.cc and https://zec.suprnova.cc
Very kind, thank you!
In case someone wnats 5% extra coins, there's a 0% fee and 5% bonus black friday on https://zcl.suprnova.cc and https://zec.suprnova.cc
I can confirm BlackFriday promo is working properly.
Great event.
Btw
R9 280x 190-200 H/s;
RX 470 4GB 170-175 H/s
RX 480 8GB 200H/s
Tahiti cards, 2048 sp ~ 200 h/s
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
Ellesmere, 2304 sp ~ 200 h/s
Pitcairn, 1280 sp ~ 100 h/s
Tonga, 2048 sp - only 140. Why so nerfish?
Claymore, fix this issue with Tonga cards pls.
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
In case someone wnats 5% extra coins, there's a 0% fee and 5% bonus black friday on https://zcl.suprnova.cc and https://zec.suprnova.cc
any report on R9 Fury speed??
Fury X in default works with 310 H/s
Fury air 275H @ 155w at wall
2Gb version not necessary,
I have HD7850 1Gb it work fine 95sol on v8
Would you like to share the price of HD 7850? I have HD7850 1Gb it work fine 95sol on v8
Is anyone else having problems controlling their rigs via ethmon with v8.0?
For my farm, v8.0 seems to have broken the communications between my miners and ethmon. Everything is in read-only mode, even when I specify the correct -mport settings. I have checked all firewall settings, including application-specific settings, and everything is normal. I've even disabled the firewall to see if that was the issue. Still doesn't work. I can see stats on ethmon, but I can't tell ethmon to restart my rig. It is very important I have control via ethmon, as I have over 40 rigs. Whats going on?
For my farm, v8.0 seems to have broken the communications between my miners and ethmon. Everything is in read-only mode, even when I specify the correct -mport settings. I have checked all firewall settings, including application-specific settings, and everything is normal. I've even disabled the firewall to see if that was the issue. Still doesn't work. I can see stats on ethmon, but I can't tell ethmon to restart my rig. It is very important I have control via ethmon, as I have over 40 rigs. Whats going on?
Ppl had the same problem after the launching of v8. Claymore did some changes and reuploaded the miner. Try to download the miner again and try, should be workinng correctly.....
Jump to: