No, no....they just can't SEE it. And also don't know what time it is.
Come to think of it...you should also add a flashing countdown timer at the bottom of the screen that blinks on and off in bright red!
And every 15 seconds it adds a little message of encouragement.
00:75: Doing good.
00:60: You got this.
00:45: Keep it up!
00:30: Almost there.....
00:15: Al...most...there....
00:00: You did it!
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 559. (Read 3839204 times)
Measure time between "DevFee: start mining" and "DevFee: stop mining and disconnect" strings. It's always 90sec.
I do this every time the purple text appears since 2 days. Maybe I interpret something wrong. You are the "boss" (and a very good one).Ok I'll make these lines purple too so you can see it.
Did anyone else LOL at this?
Better add a time stamp to that line too just to be sure! And use bold letters...and CAPS! And maybe inside some '=' signs. And make it really bright purple, too! Like this:
================= 11/16/16-19:35:00 DEV FEE: START MINING =================
...
========== 11/16/16-19:36:30 DEV FEE: STOP MINING AND DISCONNECT ==========
Whoa! Hold on, there's a dev fee? It would be nice to know that some way when you're mining.
Wait a minute... after all the promotion of claymores equihash GPU miner being the fastest out there so far with the catch of a 2.5% Dev-fee for active development of the miner, people still wonder why the purple text pops up every once in a while
Measure time between "DevFee: start mining" and "DevFee: stop mining and disconnect" strings. It's always 90sec.
I do this every time the purple text appears since 2 days. Maybe I interpret something wrong. You are the "boss" (and a very good one).Ok I'll make these lines purple too so you can see it.
Did anyone else LOL at this?
Better add a time stamp to that line too just to be sure! And use bold letters...and CAPS! And maybe inside some '=' signs. And make it really bright purple, too! Like this:
================= 11/16/16-19:35:00 DEV FEE: START MINING =================
...
========== 11/16/16-19:36:30 DEV FEE: STOP MINING AND DISCONNECT ==========
Whoa! Hold on, there's a dev fee? It would be nice to know that some way when you're mining.
the older GPUs dont like mutch undervoltage :/ (tested in my R9 270X, R9 280X and R9 290) BUT in the RX470/480 cards the undervoltage do miracles! mutch lower temps and low powerdraw! im at 1100Core with 950mV some of them go very well to 850mV but in my case is more stable at 950mV (core and mems)
Measure time between "DevFee: start mining" and "DevFee: stop mining and disconnect" strings. It's always 90sec.
I do this every time the purple text appears since 2 days. Maybe I interpret something wrong. You are the "boss" (and a very good one).Ok I'll make these lines purple too so you can see it.
Did anyone else LOL at this?
Better add a time stamp to that line too just to be sure! And use bold letters...and CAPS! And maybe inside some '=' signs. And make it really bright purple, too! Like this:
================= 11/16/16-19:35:00 DEV FEE: START MINING =================
...
========== 11/16/16-19:36:30 DEV FEE: STOP MINING AND DISCONNECT ==========
It seems that the undervoltage is not particularly friendly to this miner. I have 1 rig with 6x 390 cards (Powercolor, Saphire and Asus) which I undervolt wiht Trixx -150 mv. They work perfectly with Claymore ETH and XMR miner as well as silentarmy5. But after version 4 of this miner each of them crashes 5 to 20 mins tops after the start. I tried them separately still the same problem. Then I reduced the undervolt to -100 mv and the rig has stabilized now for 4-5 hours with a total hash of 1050 Sols/s. Currently the power draw by the wall is 1400W, but with all -150v it could have been 1200-1300W. Curiously, with Claymore ETH miner it draws 1540W, but is stable for months without any crashes at -150mv. 
I have also XFX 390 cards on other rigs, and they are stable at -150 mv since the beginning 
I have also XFX 390 cards on other rigs, and they are stable at -150 mv since the beginning 44 sols on my rx 480 and 49 sols on fury
i hope there is more hash increase in these new generation cards as claymore improve this Zcash miner.
Claymore Zcash miner almost doubled my sols in my windows mining rigs..well done!
i hope there is more hash increase in these new generation cards as claymore improve this Zcash miner.
Claymore Zcash miner almost doubled my sols in my windows mining rigs..well done!
What are you getting now with your Fury?
200 sols
i saw that a lot of you have 6 gpus.
i have 5 rx 480 on asrock btc h81.
i am thinking to add one more. You think i can do it without any problem? Becouse i heards, that system is not stable with 6 gpus? i am using win 10 temproary.
I was thinking also to buy new procesor. do you think is worth to buy i5 for 250€? not really sure.
thank you for advice.
i have 5 rx 480 on asrock btc h81.
i am thinking to add one more. You think i can do it without any problem? Becouse i heards, that system is not stable with 6 gpus? i am using win 10 temproary.
I was thinking also to buy new procesor. do you think is worth to buy i5 for 250€? not really sure.
thank you for advice.
Something is messed up with all the pools.
Can't connect to Nicehash, Flypool. When it connects 50% rejects OR 2000ms ping times.
ZEC NETWORK UNDER ATTACK???
Can't connect to Nicehash, Flypool. When it connects 50% rejects OR 2000ms ping times.
ZEC NETWORK UNDER ATTACK???
This was icing on cake for me. Besides what appeared to be much lower than calc payouts I also had this occur . I moved to coinmine. To each their own
BR
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
it doesn't effect my mining at all?
The only problem is it cannot connect for an hour or two, miner will stop mining after that. But within this period miner will check several pools many times and must find good pool.
green text is still mining for u. Purple text is mining for the dev.
44 sols on my rx 480 and 49 sols on fury
i hope there is more hash increase in these new generation cards as claymore improve this Zcash miner.
Claymore Zcash miner almost doubled my sols in my windows mining rigs..well done!
i hope there is more hash increase in these new generation cards as claymore improve this Zcash miner.
Claymore Zcash miner almost doubled my sols in my windows mining rigs..well done!
What are you getting now with your Fury?
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
it doesn't effect my mining at all?
The only problem is it cannot connect for an hour or two, miner will stop mining after that. But within this period miner will check several pools many times and must find good pool.
green text is still mining for u. Purple text is mining for the dev.
V6
Rig 1 - RX480 Saphire Ref 8GB and 4x RX470 Nitro+ 8GB
https://s22.postimg.org/4984ab8b5/Rig01.png
Rig2 - 3x RX480 Nitro+ 8GB
https://s22.postimg.org/m0jqornpt/RX480_Nitro.png
Edited: Bad links... loool
Rig 1 - RX480 Saphire Ref 8GB and 4x RX470 Nitro+ 8GB
https://s22.postimg.org/4984ab8b5/Rig01.png
Rig2 - 3x RX480 Nitro+ 8GB
https://s22.postimg.org/m0jqornpt/RX480_Nitro.png
Edited: Bad links... loool
Any joy getting the Linux miner working, you legend you... you deserve every cent of devfee & Thanks!
Not keen on running Windows on all my rigs.
Not keen on running Windows on all my rigs.
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
it doesn't effect my mining at all?
The only problem is it cannot connect for an hour or two, miner will stop mining after that. But within this period miner will check several pools many times and must find good pool.
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
it doesn't effect my mining at all?
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
Measure time between "DevFee: start mining" and "DevFee: stop mining and disconnect" strings. It's always 90sec.
I do this every time the purple text appears since 2 days. Maybe I interpret something wrong. You are the "boss" (and a very good one).Ok I'll make these lines purple too so you can see it.
Currently my rx 470x rig with g3258 cpu is overheating and I am unable to run with stable hashrate. If I put something lesser than -i 2 than silentarmy is giving more hash. :/
6xR9 380 periodically resets GPU0 speed, and the miner errors appear non-existent cards, with which it can be connected?
It's a bug, will be fixed in next update. Divide card number by 2.
How soon will be next update ?
Do you want more speed?
I got 4x480 on some of my rigs and one GPU shows 0 but with load 100% and heat. This is not so good, right ? I guess everyone wants more speed or what do you mean ?
1. It's strange and can be related to some hardware problem.
2. You will be surprised, but not all people want more speed, though it puts CPU botnets to nowhere.
Agreed, more speed puts the botnets out of business.
Jump to: