Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 598.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ?? on ??

Quote from: disman on November 14, 2016, 12:29:26 AM

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

Exactly - the only one actually making money is Claymore xD

If you check history, my miner is not x3 faster than others, I just see how fast others miners and release a bit faster version. This time I have to release faster version due to new miner. If people stop this speed racing I'll stop it too, but you know it won't work

Also do note my miner is not for NVidia, not for CPU and not for Linux, so if I release miner with x2 speed, network difficult is not going to raise x2 too.

denis1995

full member

Activity: 256

Merit: 100

Quote from: blue-yu on November 14, 2016, 01:37:52 AM

Quote from: denis1995 on November 14, 2016, 01:36:59 AM

Quote from: Tmdz on November 13, 2016, 06:08:34 PM

Not bad

What pool is this?

Nicehash

Is better tham flypool?

denis1995

full member

Activity: 256

Merit: 100

Quote from: jddebug on November 13, 2016, 09:22:05 PM

One of my rigs has Catalyst 15.8 on it.

I have tried several video driver removal tools but whenever I install 15.12 it shows up as 15.8 in Afterburner.

Appreciate any help.

Uninstall in control panel then delete all amd files in C:/ AMD. then reboot the pc and install thr dtiver again. I had the same problem few days ago and this eay fix it. I hope that helps you.

Tmdz

hero member

Activity: 1008

Merit: 1000

Quote from: blue-yu on November 14, 2016, 01:37:52 AM

Quote from: denis1995 on November 14, 2016, 01:36:59 AM

Quote from: Tmdz on November 13, 2016, 06:08:34 PM

Not bad

What pool is this?

Nicehash

I like them especially when the coin is in decline as it is. (You earn btc directly for each share you submit)

So you don't spend all day mining it, then by the time you sell on the exchange its worth 25% less.

KougarLOB

member

Activity: 136

Merit: 16

Quote from: Vicecoin777 on November 14, 2016, 01:34:26 AM

Quote from: KougarLOB on November 14, 2016, 12:31:08 AM

Quote from: SolarRunner on November 14, 2016, 12:10:51 AM

Quote from: dester on November 13, 2016, 11:17:09 PM

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

Same problem

rig 480/480/470/380x

380x - 0 sol
if 380 run single - work fine, but if run 2 miners 1 - 480/480/470 and 2 - 380 drop speed on both miner by 20-30% (

Confirmed here as well across two rigs running AMD 16.11.2 on Windows 10. Mix of 480s and 390s. First rig has two cards and three in the other. Seems to drop the the last card from the group so it drives only 1 of 2 or 2 of 3. Unused card reads idle temperatures. Using "-id 01" or "-id 0,1" (w/w/o comma) makes no difference.
Hope this gets cleared up soon. Remarkable speed difference over v4.0 and SilentArmy5 for Windows. I'm content to pay DevFee as this miner continues to improve. Thank you.

Dude all you have to do is take yours 4xx cards and create an a run bat file for they (start.bat 2) and you will modificate the comands in this way -id 012 (for example if you have the cards in this order 470/470/480) and next is puting -mport 0 ( -id 012 -mport 0 ) and config the standard bat file (start.bat) in this way -id 345 (for example if you have the olds cards in this order 390/390x/390) in this fle you dont need to put the -mport 0 comand... so if you have 6 caeds per rig in this order 480/470/470/390/390x/390.(012345) no matter the order the thing is separate the olds cards from the new ones.. so you going to use 2 windows of claymore yeah!!!
That's what i do! Cool

rx 470 115-120 S/s

r9 380x 85 - 90 S/s

Separating the cards into a 0 and 1 bat files then adding -mport 0 to one seems to have worked. Thank you.
Now to try it on the three card system...

RunnerUp

newbie

Activity: 14

Merit: 0

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.

I am getting roughly 720-750 on each rig, 120 - 130/s per card. Is there anything else I can do to increase speed? I'm not sure what mod I would need for the cards bios or how to do memory overclock. Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do? Is that just to lower power consumption or does it help increase speed?

blue-yu

newbie

Activity: 58

Merit: 0

Quote from: denis1995 on November 14, 2016, 01:36:59 AM

Quote from: Tmdz on November 13, 2016, 06:08:34 PM

Not bad

https://s13.postimg.org/rw6vkr06v/speed.jpg

What pool is this?

Nicehash

denis1995

full member

Activity: 256

Merit: 100

Quote from: Tmdz on November 13, 2016, 06:08:34 PM

Not bad

What pool is this?

Vicecoin777

newbie

Activity: 1

Merit: 0

Quote from: KougarLOB on November 14, 2016, 12:31:08 AM

Quote from: SolarRunner on November 14, 2016, 12:10:51 AM

Quote from: dester on November 13, 2016, 11:17:09 PM

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

Same problem

rig 480/480/470/380x

380x - 0 sol
if 380 run single - work fine, but if run 2 miners 1 - 480/480/470 and 2 - 380 drop speed on both miner by 20-30% (

Confirmed here as well across two rigs running AMD 16.11.2 on Windows 10. Mix of 480s and 390s. First rig has two cards and three in the other. Seems to drop the the last card from the group so it drives only 1 of 2 or 2 of 3. Unused card reads idle temperatures. Using "-id 01" or "-id 0,1" (w/w/o comma) makes no difference.
Hope this gets cleared up soon. Remarkable speed difference over v4.0 and SilentArmy5 for Windows. I'm content to pay DevFee as this miner continues to improve. Thank you.

Dude all you have to do is take yours 4xx cards and create an a run bat file for they (start.bat 2) and you will modificate the comands in this way -id 012 (for example if you have the cards in this order 470/470/480) and next is puting -mport 0 ( -id 012 -mport 0 ) and config the standard bat file (start.bat) in this way -id 345 (for example if you have the olds cards in this order 390/390x/390) in this fle you dont need to put the -mport 0 comand... so if you have 6 caeds per rig in this order 480/470/470/390/390x/390.(012345) no matter the order the thing is separate the olds cards from the new ones.. so you going to use 2 windows of claymore yeah!!!
That's what i do! Cool

rx 470 115-120 S/s

r9 380x 85 - 90 S/s

KougarLOB

member

Activity: 136

Merit: 16

"-di detect" did not work on my two-card system. Could not find warmed card.
Result is still mining with one of two cards.

BenCodie

legendary

Activity: 1708

Merit: 1048

Quote from: Xardas2014 on November 13, 2016, 08:10:20 PM

Quote from: snakey on November 13, 2016, 08:01:21 PM

Quote from: Xardas2014 on November 13, 2016, 07:57:33 PM

I had refused to share my modded rom for a Sapphire Nitro OC RX 480 8gb, but have been asked very politely by several people, soooooooo.......

http://www.filehosting.org/file/details/618115/Sapphire%20RX480%20NitroOC%20low%20watt%20modded%20vbios.rom

This rom should get ~112 Sol/s @55 watts. I don't use Trixx etc, just run it like it is, but of course you can toy with settings if you wish. My goal was highest hashrate at the lowest wattage. If you find it useful, I am not afraid of tips:
BTC 1E56WgKJK4kmaVzwxWYg1wY6iPX1GdipDK
ZLC t1VAvb4hGh8Tj68TUSpq38859yCFUxHVmwK

Do you have anything for the 470 8gb version?

Thanks

No I don't.

Will it work for this card?
How much sols/s are you getting with v5.0 with this modded bios you mentioned above?

Bananana

sr. member

Activity: 481

Merit: 250

Quote from: disman on November 14, 2016, 12:29:26 AM

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

If claymore don't increase speed, then private miner is going to profit a lot more. So its only good that if claymore can increase speed same or faster then private miner..

KougarLOB

member

Activity: 136

Merit: 16

Quote from: SolarRunner on November 14, 2016, 12:10:51 AM

Quote from: dester on November 13, 2016, 11:17:09 PM

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

Same problem

rig 480/480/470/380x

380x - 0 sol
if 380 run single - work fine, but if run 2 miners 1 - 480/480/470 and 2 - 380 drop speed on both miner by 20-30% (

Confirmed here as well across two rigs running AMD 16.11.2 on Windows 10. Mix of 480s and 390s. First rig has two cards and three in the other. Seems to drop the the last card from the group so it drives only 1 of 2 or 2 of 3. Unused card reads idle temperatures. Using "-id 01" or "-id 0,1" (w/w/o comma) makes no difference.
Hope this gets cleared up soon. Remarkable speed difference over v4.0 and SilentArmy5 for Windows. I'm content to pay DevFee as this miner continues to improve. Thank you.

disman

newbie

Activity: 25

Merit: 0

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

justinjja

newbie

Activity: 44

Merit: 0

Wow Claymore nice work, V5 is really great.
Getting 700 sol/s on my 6x Overclocked RX 480 rigs now.

Grin

powerstr

newbie

Activity: 107

Merit: 0

- id 1,2,3,4

SolarRunner

newbie

Activity: 12

Merit: 0

Quote from: dester on November 13, 2016, 11:17:09 PM

Hi. Many thanks for a job well done!
But what happened and how to fix it?
in the latest version 5 all my video show 380x - 0 sols. And it is not even loaded completely. Driver tested 16.11.3, 16.9.2
What could be the problem?

update.
480 and 380 do not work if run in a single window
If you run two separate windows. it works
but writes that long busy and asks you to specify a different port
Whether it is possible to fix?

Same problem

rig 480/480/470/380x

380x - 0 sol
if 380 run single - work fine, but if run 2 miners 1 - 480/480/470 and 2 - 380 drop speed on both miner by 20-30% (

Bananana

sr. member

Activity: 481

Merit: 250

Claymore, I love you!!!! Best miner ever...

snakey

legendary

Activity: 1386

Merit: 1001

Any good settings for RX470 8GB OC Sapphire?

Taiga

sr. member

Activity: 278

Merit: 250

this problem was in old version and now. Claymore?!

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 598. (Read 3839203 times)