Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 596.

jary20

newbie

Activity: 10

Merit: 0

Quote from: denis1995 on November 14, 2016, 07:03:48 AM

Quote from: jary20 on November 14, 2016, 06:59:11 AM

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's this

03:05:51:604 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:54:606 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:609 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 em hbt: 0, fm hbt: 31,
03:05:57:611 5d0 watchdog - thread 0, hb time 31
03:05:57:612 5d0 watchdog - thread 1, hb time 15
03:05:57:612 5d0 watchdog - thread 2, hb time 0
03:05:57:612 5d0 watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE Cry

Kernel power i got this problem a long time ago when i had x1 riser then i switch to usb riser. The problem also cam be from your power because the version 5 is consuming more power

I run the software and after five minutes the PC is rebooted, I have only one rx 480. That solution?

aaronsace

sr. member

Activity: 476

Merit: 250

Quote from: Jinx99 on November 14, 2016, 05:23:44 AM

Quote from: aaronsace on November 14, 2016, 04:38:00 AM

Quote from: Jinx99 on November 14, 2016, 04:25:04 AM

Quote from: qqqq on November 14, 2016, 03:59:12 AM

Claymore, i got issue with the new 5.0 ver for 1 of 5 rigs. It has 5 GPU and only 2 is working, the others show 0. Previous vers works ok. Nothing has been changing (drivers, config file, etc).

New 5.0 uses GPU a bit more.
You need to downclock your Hawaii cards a bit or increase voltage.
Got similar issues on some of my cards.

That isn't the issue. It's the know 4xx bug, see previous posts to fix.

1. there's no any RX 4** card, only Fiji and Hawaii
2. My RX 480 nitro's were fixed with little memclock drop - or I constatnly have "driver restored" messages.

Run Fiji and Hawaii in separate windows; it's the same bug.

denis1995

full member

Activity: 256

Merit: 100

Quote from: jary20 on November 14, 2016, 06:59:11 AM

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's this

03:05:51:604 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:54:606 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:609 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 em hbt: 0, fm hbt: 31,
03:05:57:611 5d0 watchdog - thread 0, hb time 31
03:05:57:612 5d0 watchdog - thread 1, hb time 15
03:05:57:612 5d0 watchdog - thread 2, hb time 0
03:05:57:612 5d0 watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE Cry

Kernel power i got this problem a long time ago when i had x1 riser then i switch to usb riser. The problem also cam be from your power because the version 5 is consuming more power

denis1995

full member

Activity: 256

Merit: 100

Quote from: DrX on November 14, 2016, 06:36:28 AM

Quote from: denis1995 on November 14, 2016, 05:47:51 AM

Quote from: RunnerUp on November 14, 2016, 02:46:05 AM

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.

I am getting roughly 720-750 on each rig, 120 - 130/s per card. Is there anything else I can do to increase speed? I'm not sure what mod I would need for the cards bios or how to do memory overclock. Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do? Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

My 2 rigs (7950+7950+280 & 290x+290) are using about 850w, so i think one 7950/280 will take about 150w and 290(x) maybe 200w... so I think your 4x280 rig would take about 600w only...

Ok thanks you.

jary20

newbie

Activity: 10

Merit: 0

Hello, I need help version 5 the claymore's. restart the pc giving a error kernel power. In the log of Claymore's this

03:05:51:604 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:54:606 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:609 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 Cannot get Overdrive capabilities for adapter 0
03:05:57:611 5d0 em hbt: 0, fm hbt: 31,
03:05:57:611 5d0 watchdog - thread 0, hb time 31
03:05:57:612 5d0 watchdog - thread 1, hb time 15
03:05:57:612 5d0 watchdog - thread 2, hb time 0
03:05:57:612 5d0 watchdog - thread 3, hb time 46

I use a Shapphire nitro + rx 480 8Gb OC
GPU CLOCK 1342
MEM CLOCK 2000
I have put 16.11.3 drivers with windows 7 64bit i5 2500k

And I use this configuration Claymore's

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal x.x -zpsw x -i 0 -allpools 1 -wd 0 -ttli 80 -tt -75 -fanmax 80 -tstop 95 -r -1 -colors 1

NEED HELP PLEASE Cry

HardwarePal

hero member

Activity: 565

Merit: 500

Still getting hangs 0% GPU usage and no submitted shares after Devfee: on one rig and on the other it hangs 0% GPU usage and no submitted shares on restart with watchdog.

jasini1690

newbie

Activity: 6

Merit: 0

GPU #0: Ellesmere, 4096 MB available, 36 compute units RX480 Nitro+ 4gb 2 fans
GPU #1: Ellesmere, 8192 MB available, 36 compute units RX480 Nitro+ 8gb 1 fan
GPU #2: Ellesmere, 8192 MB available, 36 compute units RX480 Strix+ 8gb 3 fans
GPU #3: Ellesmere, 8192 MB available, 36 compute units RX480 Strix+ 8gb 3 fans

ZEC - Total Speed: 509.641 H/s, Total Shares: 19369, Rejected: 22, Time: 12:46
ZEC: GPU0 123.882 H/s, GPU1 121.315 H/s, GPU2 131.806 H/s, GPU3 132.766 H/s

i love this miner great work

i used Ethos before. GPU0 - 30 sols
GPU1 - 40 sols
GPU2,3 - 43 sols

Ale-x

newbie

Activity: 36

Merit: 0

Quote from: adaseb on November 13, 2016, 03:50:27 PM

Should bounce from here. Very low risk/High Reward trade.

http://i64.tinypic.com/8xig5v.png

Thank you, bro. I've lost 20% today

DrX

member

Activity: 233

Merit: 20

Quote from: denis1995 on November 14, 2016, 05:47:51 AM

Quote from: RunnerUp on November 14, 2016, 02:46:05 AM

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.

I am getting roughly 720-750 on each rig, 120 - 130/s per card. Is there anything else I can do to increase speed? I'm not sure what mod I would need for the cards bios or how to do memory overclock. Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do? Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

My 2 rigs (7950+7950+280 & 290x+290) are using about 850w, so i think one 7950/280 will take about 150w and 290(x) maybe 200w... so I think your 4x280 rig would take about 600w only...

MasterSE

newbie

Activity: 41

Merit: 0

crimson 16.10.3, win10x64AU - Nano, 280X, 270X, RX480 - all good.

denis1995

full member

Activity: 256

Merit: 100

Quote from: RunnerUp on November 14, 2016, 02:46:05 AM

I have 2 rigs x6 msi rx480 8gb cards(ellesmere 1303/2000 stock) on win 10, z97 gaming mb and 8gb ram, 1200watt psu.

Rig 1 has a small overclock of 1350/2100 using afterburner, tried the same on rig 2 and one of the GPU's crashed.

I am getting roughly 720-750 on each rig, 120 - 130/s per card. Is there anything else I can do to increase speed? I'm not sure what mod I would need for the cards bios or how to do memory overclock. Any help is much appreciated.(I am happy with these speeds but would like to learn how to push the cards harder)

Also, what does undervolting the cards do? Is that just to lower power consumption or does it help increase speed?

Only 1200? I also have 2 rigs 1 is with 2x xfx 280, gigabyte 280x and r9 390. The other is 4x xfx 280. How much power im using? I have 2x1300w plat. But not sure if i use the powrr at all i cant out watmetter becausr i am already out. Did you know any other method to check the powe that tge rigs are consuming? Thanks you in advanced.

ol92

sr. member

Activity: 445

Merit: 255

Quote from: Claymore on November 14, 2016, 03:10:26 AM

Quote from: ?? on ??

Quote from: disman on November 14, 2016, 01:29:26 AM

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

Exactly - the only one actually making money is Claymore xD

If you check history, my miner is not x3 faster than others, I just see how fast others miners and release a bit faster version. This time I have to release faster version due to new miner. If people stop this speed racing I'll stop it too, but you know it won't work

Also do note my miner is not for NVidia, not for CPU and not for Linux, so if I release miner with x2 speed, network difficult is not going to raise x2 too.

Faster public miners don't kill coins! Private miners which could concentrate hash power in a few big farms may be nocive for the coins if they are a lot faster than public ones.
Faster public miners on the contrary, help with a more diversified distribution, lowering the impact of private miners.

The price is declining because zcash was overpriced due to the low initial mining rewards which leads to a very low initial supply.
The total emission will be 21 millions of coins like bitcoin or like monero in 2040: Expecting the price could be maintened around 1 btc is unreasonnable for short/medium term. I would expect price going in the 0.005-0.05 range.

ivomm

legendary

Activity: 1881

Merit: 3057

All good things to those who wait

Quote from: hectordsd on November 14, 2016, 05:06:24 AM

my zecminer crashes only in a 380 rig, someone with the same problem?

My 6 R9 390 rig crashes severely on all cards. The same type of cards on mixed rigs work flawlessly! The 390 rig works perfectly with other miners (Claymore ETH, XMR, Silentarmy5) and with significantly fewer crashes on ZEC versions 3-4. I am considering replacing driver 15.12 with the lastest 16.10 or 16.11.

z0n0

legendary

Activity: 1274

Merit: 1006

~140 Sols with 290 (rock stable)

Jinx99

member

Activity: 91

Merit: 10

Quote from: aaronsace on November 14, 2016, 04:38:00 AM

Quote from: Jinx99 on November 14, 2016, 04:25:04 AM

Quote from: qqqq on November 14, 2016, 03:59:12 AM

Claymore, i got issue with the new 5.0 ver for 1 of 5 rigs. It has 5 GPU and only 2 is working, the others show 0. Previous vers works ok. Nothing has been changing (drivers, config file, etc).

New 5.0 uses GPU a bit more.
You need to downclock your Hawaii cards a bit or increase voltage.
Got similar issues on some of my cards.

That isn't the issue. It's the know 4xx bug, see previous posts to fix.

1. there's no any RX 4** card, only Fiji and Hawaii
2. My RX 480 nitro's were fixed with little memclock drop - or I constatnly have "driver restored" messages.

hectordsd

newbie

Activity: 30

Merit: 0

my zecminer crashes only in a 380 rig, someone with the same problem?

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: ?? on ??

Quote from: disman on November 14, 2016, 01:29:26 AM

What do you rejoice? It is advantageous when your speed is higher than the other. And when the rate rises in all, you are in relation to other, standing pat are.

It just kills the coin.

Exactly - the only one actually making money is Claymore xD

And now starting to think in finding other Coins, Zcash price is still continuously failing and difficulty rising, for me it is not already profitable.

hashgoalPool

full member

Activity: 177

Merit: 100

aaronsace

sr. member

Activity: 476

Merit: 250

hashgoalPool

full member

Activity: 177

Merit: 100

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 596. (Read 3839163 times)