Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 627. (Read 3839163 times)
Confirmed issue with rejects if you specify different values for "-i" parameter, for example, "-i 1,2". Will be fixed in next update. Speed improvements will be included too
For anyone with R9 290 REFERENCE with STILT BIOS with ELPIDA memory , I found the sweet spot
1100/1450 Or 1050/1450 you should get 95 Sol/s
This is with a crappy Celeron using "-i 0"
1100/1450 Or 1050/1450 you should get 95 Sol/s
This is with a crappy Celeron using "-i 0"
I dont see any view miner console comand on ethman
Thank you Claymore for your work. do not pay attention to the haters.
I have one request
plz add a key -donate to be able to express my gratitude to deductions of more than 2.5%
I have one request
plz add a key -donate to be able to express my gratitude to deductions of more than 2.5%
470 is 4gb or 8gb
What speed at gpu and memory is custom rom
What speed at gpu and memory is custom rom
4gb 1150/1950 homemade roms
Nota: cpu usage is 1-2% with SA for those with weak cpus
At least on a low end cpu i-0 provides the highest hashrates on 4.0. Thanks Claymore! No complaints about fee whether Eth miner or Zcash. EVER!
Confirmed on Pentium G3240. i-0 Getting 75-80 with both rx470s and 480s under 50% cpu.
Changing to i-2 lowers H/s by 5-15 and at least 75% cpu use at all times.
Thank you Claymore, you deserve the fee for your work!
Big breakthrough on silentarmy side, I get now 85 S/s per RX 470
Total 173.4 sol/s [dev0 87.8, dev1 87.5] 9 shares
Total 174.1 sol/s [dev0 85.8, dev1 87.6] 9 shares
Total 173.7 sol/s [dev0 85.2, dev1 86.0] 9 shares
Total 173.4 sol/s [dev0 87.8, dev1 87.5] 9 shares
Total 174.1 sol/s [dev0 85.8, dev1 87.6] 9 shares
Total 173.7 sol/s [dev0 85.2, dev1 86.0] 9 shares
is that miner still Linux only?
470 is 4gb or 8gb
What speed at gpu and memory is custom rom
What speed at gpu and memory is custom rom
Big breakthrough on silentarmy side, I get now 85 S/s per RX 470
Total 173.4 sol/s [dev0 87.8, dev1 87.5] 9 shares
Total 174.1 sol/s [dev0 85.8, dev1 87.6] 9 shares
Total 173.7 sol/s [dev0 85.2, dev1 86.0] 9 shares
Total 173.4 sol/s [dev0 87.8, dev1 87.5] 9 shares
Total 174.1 sol/s [dev0 85.8, dev1 87.6] 9 shares
Total 173.7 sol/s [dev0 85.2, dev1 86.0] 9 shares
At least on a low end cpu i-0 provides the highest hashrates on 4.0. Thanks Claymore! No complaints about fee whether Eth miner or Zcash. EVER!
@Claymore
looks like some sync related bug - I've got a mixed rig here: it has 370, 470 and 480s.
If I run different intensity (2 for 400 and 1 for 370) I get about 15% of shares rejected.
If all is set to "-i 2" - no problem, rejects below 1%
looks like some sync related bug - I've got a mixed rig here: it has 370, 470 and 480s.
If I run different intensity (2 for 400 and 1 for 370) I get about 15% of shares rejected.
If all is set to "-i 2" - no problem, rejects below 1%
What rates are you getting for your 370 and what clock settings?
I'm now running stock 985&1400 (since v3.1 it became extremely unstable on higher freq, was running 1080&1500 before)
Try 1375 on the mem. The range from 1376 - 1500 uses looser timings, so it's probably worth the 25MHz drop.
Thanks for the tip! It does now 40-42 and almost never goes below 40
hi. what pool do you use guys?
im on flypool. worked nice so far.
im on flypool. worked nice so far.
yeah second that. use 4.0 with -i 0
Actually, just that.... Even with my RX480s and a 4.4GHz 4790k i7 pumping them, -i 0 is faster than 1 and 2. Your results of course may vary, but with these things you have to trial and error.
Same here - 4 rigs with 6 RX480's - all with Celeron procs - run very nice with -i 0
I also have found very little actual difference between -0, 1, or 2 as far as shares reported to the pool. I had a couple of rigs start off on 2 and crash after a few minutes. I lowered them down to 0 and noticed the shares/hash did not really seem to change that much. It is much more stable though on 0 and the CPU usage drops a bit, although I didn't really notice a huge difference there either.
how to fix that ?
16:37:55:681 2094 AMD Cards available: 1
16:37:55:700 2094 GPU #0: Pitcairn, 1024 MB available, 16 compute units
16:37:55:703 2094 POOL version
16:37:55:703 2094 b161
16:37:55:703 2094 Platform: Windows
16:37:55:719 2094 start building OpenCL program...
16:37:56:420 2094 done
16:37:56:420 2094 GPU #0 intensity 0
16:37:56:420 2094 Total cards: 1
16:37:56:505 2094 OpenCL error 0 #101 - -61
Ati 7850 XFX 1GB ..
after that.. 10 sec going .. blue screen on win 10
VIDEO_TDR_FAILURE
atikmpag.sys faild
because i use
Radeon Software Version
16.11.2
16:37:55:681 2094 AMD Cards available: 1
16:37:55:700 2094 GPU #0: Pitcairn, 1024 MB available, 16 compute units
16:37:55:703 2094 POOL version
16:37:55:703 2094 b161
16:37:55:703 2094 Platform: Windows
16:37:55:719 2094 start building OpenCL program...
16:37:56:420 2094 done
16:37:56:420 2094 GPU #0 intensity 0
16:37:56:420 2094 Total cards: 1
16:37:56:505 2094 OpenCL error 0 #101 - -61
Ati 7850 XFX 1GB ..
after that.. 10 sec going .. blue screen on win 10
VIDEO_TDR_FAILURE
atikmpag.sys faild
because i use
Radeon Software Version
16.11.2
Try -i 0 or -i 1, working for me. I have the same problem with -i 2 for 7850.
Claymore I am getting this message every time I mine on miningpoolhub
ZEC - Total Speed: 132.051 H/s, Total Shares: 412, Rejected: 0, Time: 01:57
ZEC: GPU0 70.845 H/s, GPU1 61.206 H/s
DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
GPU0 t=87C fan=54%
DevFee: ZEC: Stratum - connecting to 'europe.equihash-hub.miningpoolhub.com' <46.101.243.246> port 12023
DevFee: ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
ZEC - Total Speed: 132.051 H/s, Total Shares: 412, Rejected: 0, Time: 01:57
ZEC: GPU0 70.845 H/s, GPU1 61.206 H/s
DevFee: ZEC: Job timeout, disconnect, retry in 20 sec...
GPU0 t=87C fan=54%
DevFee: ZEC: Stratum - connecting to 'europe.equihash-hub.miningpoolhub.com' <46.101.243.246> port 12023
DevFee: ZEC: Authorization failed
: {"id":2,"result":false,"error":null}
Can anyone tell me your speed with R9 380 4gb? I'am getting roughly 45 Sols/s.
mine 380 2G doing around 42-44 my 2 GB sapphire nitro 380ITX (1100/1400) gets 48-50 -i 1 v4.0
Anyone here running R9 290 REFERENCE with STILT BIOS?
Trying to get a good speed but I am stuck at 85 Sol/s with "-i 0" at 1050/1250.
According to his BIOS manual
The recommended memory frequency is 1375MHz - 1450MHz for Elpida and 1375MHz - 1475MHZ for Hynix.
However I am getting the same speed with any memory clock.
Trying to get a good speed but I am stuck at 85 Sol/s with "-i 0" at 1050/1250.
According to his BIOS manual
The recommended memory frequency is 1375MHz - 1450MHz for Elpida and 1375MHz - 1475MHZ for Hynix.
However I am getting the same speed with any memory clock.
290x ref with Stilt BIOS, yes.... But all my 290x do 80~90 sol/s with 1000/1250.
Like you say, changing memory speed does nothing, as does changing GPU speed. I think in my case either the CPU(Celeron G1840) or PCIe bus is holding them back. I have an i3 4170 coming soon to see what difference, if any, that makes. Also going to try changing all the PCIe slots to gen 2, as the ones on gen 1 setting appear to be the slower ones.
i'm going to try some BIOS mods tonight, tighter timings etc as most of my 290x are using stock memory straps/timings. I've only modified them to drop voltage.
I got this output on v4.0
ZEC - Total Speed: 234.442 H/s, Total Shares: 12, Rejected: 0, Time: 00:00
ZEC: GPU0 77.947 H/s, GPU1 77.873 H/s, GPU2 0.000 H/s, GPU3 78.623 H/s
ZEC: 11/11/16-06:17:20 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:22 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 11/11/16-06:17:29 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (32 ms)!
ZEC: 11/11/16-06:17:31 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (47 ms)!
GPU0 t=53C fan=5%, GPU1 t=66C fan=2%, GPU2 t=68C fan=57%, GPU3 t=67C fan=79%
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
Restarting OK, exit...
there is no GPU4 or 5 and its GPU2 that hung.
thanks
Boysie
ZEC - Total Speed: 234.442 H/s, Total Shares: 12, Rejected: 0, Time: 00:00
ZEC: GPU0 77.947 H/s, GPU1 77.873 H/s, GPU2 0.000 H/s, GPU3 78.623 H/s
ZEC: 11/11/16-06:17:20 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:22 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 11/11/16-06:17:29 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (32 ms)!
ZEC: 11/11/16-06:17:31 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (47 ms)!
GPU0 t=53C fan=5%, GPU1 t=66C fan=2%, GPU2 t=68C fan=57%, GPU3 t=67C fan=79%
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
Restarting OK, exit...
there is no GPU4 or 5 and its GPU2 that hung.
thanks
Boysie
GPU 3
What exactly does GPU 3 mean / imply?
Anyone here running R9 290 REFERENCE with STILT BIOS?
Trying to get a good speed but I am stuck at 85 Sol/s with "-i 0" at 1050/1250.
According to his BIOS manual
The recommended memory frequency is 1375MHz - 1450MHz for Elpida and 1375MHz - 1475MHZ for Hynix.
However I am getting the same speed with any memory clock.
Trying to get a good speed but I am stuck at 85 Sol/s with "-i 0" at 1050/1250.
According to his BIOS manual
The recommended memory frequency is 1375MHz - 1450MHz for Elpida and 1375MHz - 1475MHZ for Hynix.
However I am getting the same speed with any memory clock.
yeah second that. use 4.0 with -i 0
Actually, just that.... Even with my RX480s and a 4.4GHz 4790k i7 pumping them, -i 0 is faster than 1 and 2. Your results of course may vary, but with these things you have to trial and error.
Same here - 4 rigs with 6 RX480's - all with Celeron procs - run very nice with -i 0
Jump to: