Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 629. (Read 3839201 times)
in dual ether+sia mode my rig was consuming 900 wt with downvolts and was very unstable. Zec on V4 consumes only 640 wt and is very stable.
Can anyone tell me your speed with R9 380 4gb? I'am getting roughly 45 Sols/s.
Do anyone use a R7 370 4gb vaporX? Whats your seed like I'am getting 40-45 Sols/s.
I really want to compare so I can see if I'am getting the same speed as others.
Thank you.
Do anyone use a R7 370 4gb vaporX? Whats your seed like I'am getting 40-45 Sols/s.
I really want to compare so I can see if I'am getting the same speed as others.
Thank you.
Looks like again
ETH profitability = ZEC profitability for RX 470 / RX 480
With SIA dual minings its more profitable when you take into account the fees.
By Monday unless ZCASH goes up again, ETH will be more profitable since during the weekend everybody will have extra time to upgrade to Claymore 4.0, and the Nvidia people finally have a fast miner.
ETH profitability = ZEC profitability for RX 470 / RX 480
With SIA dual minings its more profitable when you take into account the fees.
By Monday unless ZCASH goes up again, ETH will be more profitable since during the weekend everybody will have extra time to upgrade to Claymore 4.0, and the Nvidia people finally have a fast miner.
For the RX series mining, do you see the ZEC mining use more power than the Etheruem? How about the R9 390?
The 4.0 version provided about a 30% H/s increase for my system over version 3.1. I have two RX480's on windows 10. One card is 4GB, the other is 8GB and I am running the latest catalyst drivers.
Even though I am getting an increased H/s, I do not get credit for any shares on zcash.flypool.org. Is anyone else seeing the same behavior?
Even though I am getting an increased H/s, I do not get credit for any shares on zcash.flypool.org. Is anyone else seeing the same behavior?
What's your config and zcash address??
The 4.0 version provided about a 30% H/s increase for my system over version 3.1. I have two RX480's on windows 10. One card is 4GB, the other is 8GB and I am running the latest catalyst drivers.
Even though I am getting an increased H/s, I do not get credit for any shares on zcash.flypool.org. Is anyone else seeing the same behavior?
Even though I am getting an increased H/s, I do not get credit for any shares on zcash.flypool.org. Is anyone else seeing the same behavior?
Today there was a problem
Driver removal does not fix the problem
Everything works fine after a reboot began this error
card is on the test computer r7 370 and would like to understand what it
it does not see any miner, but it works great in 3D and different games all see it and everything works
ps also shows that it is present
What can be wrong?
thanks for the help
https://psv4.vk.me/c810527/u14316278/docs/2bd36dba6cd0/Snimok.png?extra=3Q-ktA2DeIWqp_kivwQ55X62nva0IzFP-rOwK7T98XbS_LBV1ZerMxphBTasVAwFRP2igpp1y5SVwBtSTdEejr3nk7kVOs05IyvNxJ_sZdR2g0ZCdjRS_oY
Driver removal does not fix the problem
Everything works fine after a reboot began this error
card is on the test computer r7 370 and would like to understand what it
it does not see any miner, but it works great in 3D and different games all see it and everything works
ps also shows that it is present
What can be wrong?
thanks for the help
https://psv4.vk.me/c810527/u14316278/docs/2bd36dba6cd0/Snimok.png?extra=3Q-ktA2DeIWqp_kivwQ55X62nva0IzFP-rOwK7T98XbS_LBV1ZerMxphBTasVAwFRP2igpp1y5SVwBtSTdEejr3nk7kVOs05IyvNxJ_sZdR2g0ZCdjRS_oY
the 380's need an optimization, it s the worst one and i have 95% of 380's 
even the 270 get better speed
if i could modify the bios for better ram timing to get it at 1500 i guess it would help
or maybe claymore can do some optimization in miner for 380?
even the 270 get better speed
if i could modify the bios for better ram timing to get it at 1500 i guess it would help
or maybe claymore can do some optimization in miner for 380?
There was a guy that modded the 380 for FREE somewhere on this forum for ETH mining. They had great speed improvements, try and search for his BIOS's. This was like 2-3 months ago.
Try this. Had it in my folder could be useful;). https://bitcointalksearch.org/topic/custom-r9-380-bios-for-23-24mhs-1620733
BR
Yeah that's the thread I was talking about.
i google but i found nothing easy to use and also i have all samsung memory (xfx, asus, sapphire 380 all 2Gigas)
Does anyone have a good RX 480 Reference BIOS for Zcash? I am topping out at 70 Sol/s, but I see folks claiming 80?
I'm getting 70-75 h/s, you are not far off, have you modded your GPU bios?
Looks like again
ETH profitability = ZEC profitability for RX 470 / RX 480
With SIA dual minings its more profitable when you take into account the fees.
By Monday unless ZCASH goes up again, ETH will be more profitable since during the weekend everybody will have extra time to upgrade to Claymore 4.0, and the Nvidia people finally have a fast miner.
ETH profitability = ZEC profitability for RX 470 / RX 480
With SIA dual minings its more profitable when you take into account the fees.
By Monday unless ZCASH goes up again, ETH will be more profitable since during the weekend everybody will have extra time to upgrade to Claymore 4.0, and the Nvidia people finally have a fast miner.
Quote
Plus, he dislikes linux, because many things are harder to do
Just to say about that line...Coin always has 2 sides...it may be harder for you...but not for others.He meant harder for Claymore to develop on Linux.
That's unfortunate, a new Silentarmy fork released today, which work on Linux and is faster than Claymore 4.0...
But why should Claymore compete on all fronts?
He makes the BEST windows AMD miners. Let him stick to that.
This way others in the community have a chance to compete to make the best linux and nvidia miners.
Quote
Plus, he dislikes linux, because many things are harder to do
Just to say about that line...Coin always has 2 sides...it may be harder for you...but not for others.He meant harder for Claymore to develop on Linux.
That's unfortunate, a new Silentarmy fork released today, which work on Linux and is faster than Claymore 4.0...
Seems only fast or as fast for the RX 470/RX480 correct? How are the 280x on those ?
Quote
Plus, he dislikes linux, because many things are harder to do
Just to say about that line...Coin always has 2 sides...it may be harder for you...but not for others.He meant harder for Claymore to develop on Linux.
That's unfortunate, a new Silentarmy fork released today, which work on Linux and is faster than Claymore 4.0...
Quote
Plus, he dislikes linux, because many things are harder to do
Just to say about that line...Coin always has 2 sides...it may be harder for you...but not for others.He meant harder for Claymore to develop on Linux.
What cpu should I buy to improve my solrate?
I have now celeron g1840 and my best rate is with -i 0,
with -i 1 is less and with -i 2 my rig freezes.
Higher "-i" have no impact even if I choose only one card with -di parameter :S
i have rx 480 rx 470 and r7 370
I have now celeron g1840 and my best rate is with -i 0,
with -i 1 is less and with -i 2 my rig freezes.
Higher "-i" have no impact even if I choose only one card with -di parameter :S
i have rx 480 rx 470 and r7 370
I have observed the same scenario and would also like to know the answer.
Will Pentium help? (I guess no, but maybe latest skylake?)
Will i3 be enough for 6, 7 card rigs, or we have to go i5?
I haven't heard anyone with an i3 complaining about 100% CPU usage, so an i3 is probably ok...i5 for sure. I would stick with haswell socket 1150 chips though so you don't have to spend extra on a board and ram...just drop it in!
buying new cpu just for this (run I2 instead of I0) is a bad idea, you never gonna paid you cpu back
better buy 1 gpu more with the same money
I found about 2times better cpu (according to benchmarks) for about 70usd.
So if it could give me few % more it could be worth it..
Its not worth it, going from a Sempron to a i3, I get less than 5% hashrate difference.
Pretty soon someone will recode this SilentArmy kernel and it won't rely on CPU usage.
Sometimes its not the CPU but the Riser not being able to handle all that bandwidth.
So 16-16x risers could be better?
Yes those will always be faster and less incorrect shares errors.
@adaseb I'm currently using the USB 3.0 powered risers on all my rigs (R9 290s and RX 480s 8GB). Is there something better to use, i.e. 16-16x risers? If so, how do you power them or is it not needed? Thanks!
Right now don't buy anything wait until this kernel is improved and relies less on CPU usage.
Does anyone have a good RX 480 Reference BIOS for Zcash? I am topping out at 70 Sol/s, but I see folks claiming 80?
With the new miner(4.0) I'm seeing big benefits from clocking the GPU core higher.
1325/2150 sees my RX480s sometimes hit 90 sol/s with -i 0. So try clocking the GPU core more before BIOS mods.
Those are awesome results! Can you do that in WattTool or do you have to use AMD Setting (wattman). Could you screen shot your settings?
You can use WattTool or MSI Afterburner(What I actually use), you don't need a screenshot. It's not rocket science.
I thought Afterburner wasn't compatible with the RX 480s... I must have missed an update. Thanks
Does anyone have a good RX 480 Reference BIOS for Zcash? I am topping out at 70 Sol/s, but I see folks claiming 80?
With the new miner(4.0) I'm seeing big benefits from clocking the GPU core higher.
1325/2150 sees my RX480s sometimes hit 90 sol/s with -i 0. So try clocking the GPU core more before BIOS mods.
Those are awesome results! Can you do that in WattTool or do you have to use AMD Setting (wattman). Could you screen shot your settings?
You can use WattTool or MSI Afterburner(What I actually use), you don't need a screenshot. It's not rocket science.
Does anyone have a good RX 480 Reference BIOS for Zcash? I am topping out at 70 Sol/s, but I see folks claiming 80?
With the new miner(4.0) I'm seeing big benefits from clocking the GPU core higher.
1325/2150 sees my RX480s sometimes hit 90 sol/s with -i 0. So try clocking the GPU core more before BIOS mods.
Those are awesome results! Can you do that in WattTool or do you have to use AMD Setting (wattman). Could you screen shot your settings?
Does anyone have a good RX 480 Reference BIOS for Zcash? I am topping out at 70 Sol/s, but I see folks claiming 80?
With the new miner(4.0) I'm seeing big benefits from clocking the GPU core higher.
1325/2150 sees my RX480s sometimes hit 90 sol/s with -i 0. So try clocking the GPU core more before BIOS mods.
What cpu should I buy to improve my solrate?
I have now celeron g1840 and my best rate is with -i 0,
with -i 1 is less and with -i 2 my rig freezes.
Higher "-i" have no impact even if I choose only one card with -di parameter :S
i have rx 480 rx 470 and r7 370
I have now celeron g1840 and my best rate is with -i 0,
with -i 1 is less and with -i 2 my rig freezes.
Higher "-i" have no impact even if I choose only one card with -di parameter :S
i have rx 480 rx 470 and r7 370
I have observed the same scenario and would also like to know the answer.
Will Pentium help? (I guess no, but maybe latest skylake?)
Will i3 be enough for 6, 7 card rigs, or we have to go i5?
I haven't heard anyone with an i3 complaining about 100% CPU usage, so an i3 is probably ok...i5 for sure. I would stick with haswell socket 1150 chips though so you don't have to spend extra on a board and ram...just drop it in!
buying new cpu just for this (run I2 instead of I0) is a bad idea, you never gonna paid you cpu back
better buy 1 gpu more with the same money
I found about 2times better cpu (according to benchmarks) for about 70usd.
So if it could give me few % more it could be worth it..
Its not worth it, going from a Sempron to a i3, I get less than 5% hashrate difference.
Pretty soon someone will recode this SilentArmy kernel and it won't rely on CPU usage.
Sometimes its not the CPU but the Riser not being able to handle all that bandwidth.
So 16-16x risers could be better?
Yes those will always be faster and less incorrect shares errors.
@adaseb I'm currently using the USB 3.0 powered risers on all my rigs (R9 290s and RX 480s 8GB). Is there something better to use, i.e. 16-16x risers? If so, how do you power them or is it not needed? Thanks!
what is the best CPU for mining with claymore v4 with 6 GPU RX480? I am not mining with cpu and it is load on 98% and all of my cards reduced hashpower to 55. When i mine only 2 the hashpower is 79 per GPU. CPU is Intel 1150s G1820 2.7Ghz only 2 logical cores. I mod my all RX 480 with only change memory timing.
Use -t 0Jump to: