Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 636.

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: Sam123 on November 10, 2016, 10:03:22 PM

I have 4 RX480 the first 3 cards are running ~60 H/s but the last one ~18 H/s.
I switch the cards and it's always GPU3 (last one) that has the lowest. Why?
I tried -i 0 or -i 2 does not change
Thanks

probabaly the usb riser issue . otherwise I have seen this. Just reboot the system and the card acts normal.

snakey

legendary

Activity: 1386

Merit: 1001

Quote from: manoe on November 10, 2016, 08:15:56 PM

Quote from: snakey on November 10, 2016, 07:50:24 PM

Anyone getting good results with Sapphire rx470 8gb?

only getting around 60 - 64.

A little help please?

https://youtu.be/uy0roLG7ARc
Good video to learn how to set your timings hope its helping

Thanks, seen this video but its for the 4gb version....

IS it ok to use on the 8gb version?

Sam123

hero member

Activity: 980

Merit: 502

I have 4 RX480 the first 3 cards are running ~60 H/s but the last one ~18 H/s.
I switch the cards and it's always GPU3 (last one) that has the lowest. Why?
I tried -i 0 or -i 2 does not change
Thanks

chinh.daongoc

jr. member

Activity: 64

Merit: 1

Can you help me to confirm MSI RX470 4GB speed with Claymore 4.0, -i 2, @ 1050/1900. Thanks

buckrogers

legendary

Activity: 2746

Merit: 1181

Quote from: AltcoinScamfinder on November 10, 2016, 06:49:37 PM

What does 'DevFee: Stop mining and disconnect" mean? I just run stock everything with 2 x 290. Am I not paying devfee? I want to!

I believe that is part of the code telling you the dev fee portion of mining has finished for the hour

please support the dev fee

Keep up the great work @Claymore! It is very big of you to even include the option to disable that...if people do, ? i just have no words.

thanks!

buckrogers

legendary

Activity: 2746

Merit: 1181

Quote from: fedoros on November 10, 2016, 04:34:34 PM

Quote from: fedoros on November 10, 2016, 12:51:49 PM

Getting this error all the time on different pools. What is it ?

server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...

help pls

https://bitcointalk.org/index.php?topic=1433925.1400

that was from a similar thread, you may find answers there..good luck

thanks!

TheRider

full member

Activity: 157

Merit: 100

Code:

ZEC - Total Speed: 260.669 H/s, Total Shares: 211, Rejected: 0, Time: 00:59
ZEC: GPU0 94.419 H/s, GPU1 92.127 H/s, GPU2 74.123 H/s
GPU0 t=72C fan=0%, GPU1 t=68C fan=0%, GPU2 t=68C fan=58%

GPU 0 & 1: R9 295x2 1100/1500 stock BIOS
GPU 2: Nitro RX470 8G 1350/2100 stock BIOS

-i 2, with dev fee

Tuner77

member

Activity: 112

Merit: 10

Quote from: manoe on November 10, 2016, 09:20:57 PM

I use win 8.1 with wattsman and mod. Bios with atiwinflash and polaris. 1303 mhz gpu clock and 1950mhz mem. 50% powlimit getting 80 - 86H/s each card rx480 4gb devfee on

With powerlimit -50% of base?

Tuner77

member

Activity: 112

Merit: 10

All hail Claymore. 85sol nitro+ 480, 80sol xfx gtr 480

Anyone else notice 40% cpu usage from the miner?

I'm using -i 2, only two cards right now.

gennadiv

full member

Activity: 139

Merit: 100

during the operation of the program until a failure is not found - but the fall speed was very considerably - while at the moment here
ZEC - Total Speed: 130.837 H/s, Total Shares: 3047, Rejected: 4, Time: 10:13
ZEC: GPU0 43.328 H/s, GPU1 44.763 H/s, H GPU2 42.745/s

manoe

newbie

Activity: 51

Merit: 0

I use win 8.1 with wattsman and mod. Bios with atiwinflash and polaris. 1303 mhz gpu clock and 1950mhz mem. 50% powlimit getting 80 - 86H/s each card rx480 4gb devfee on

manoe

newbie

Activity: 51

Merit: 0

Quote from: TheKoolaider on November 10, 2016, 08:22:48 PM

Putting in my two cents.

XFX RX480 8GB x6(stock) - crashes at "-i 2." Currently testing default settings to see if rig crashes again. *EDIT* Rig crashes on stock settings and default intensity. I would also like to add that at 4 GPUs the rig was stable, I just added two more cards tonight, and now I'm experiencing the crashing. Any ideas? I have PCI set to Gen 2, is Gen 1 necessary? This rig has a cheapo dual core cpu, 4gb of ram and h81 btc mobo.

MSI RX480 8gb x4(Memory clock 2200, Core clock stock) - Runs fine, no crashes. "-i 2" setting.

you can open task manager to see what the cpu is doing. my cpu is also 2core and i'm on 88% -i 2
If the cpu runs @ 100% on -i 2 its not pretty good it will be better to try -i 0 or -i1

du44

full member

Activity: 251

Merit: 100

Quote from: anotherminer on November 10, 2016, 08:25:18 PM

Version 4.0 Inefficient with multi-card rigs??

My hashrate drops as I turn on more cards, anyone else experiencing this issue?

most of my rigs are:

6x R9 390's
Win 8.1
15.12 drivers
CPU = G3260 Haswell Pentium

I think the issue might be the CPU, only 2 core and does not have AVX

With just 1 or 2 cards running I average around 90-95H/s per card
with 3 cards on... 80-85H/s per card
with 4 cards on... 75-80H/s per card
with 6 cards on... 55-60H/s per card

Otherwise, everything is pretty stable, been mining ETH for months

Try -i 0
90-103 sols per each 390 in 6gpu rig with Celeron g1840

Acguy

sr. member

Activity: 308

Merit: 250

Amazing how every update boosts my hashrate a lot!

papasmurf1337

newbie

Activity: 64

Merit: 0

I used to have MSI now i have Sapphire RX 480 4GB models, what software you use for clocks, and what params you use?
also do you have win7 or win10 what is better for use?

anotherminer

newbie

Activity: 6

Merit: 0

Version 4.0 Inefficient with multi-card rigs??

My hashrate drops as I turn on more cards, anyone else experiencing this issue?

most of my rigs are:

6x R9 390's
Win 8.1
15.12 drivers
CPU = G3260 Haswell Pentium

I think the issue might be the CPU, only 2 core and does not have AVX

With just 1 or 2 cards running I average around 90-95H/s per card
with 3 cards on... 80-85H/s per card
with 4 cards on... 75-80H/s per card
with 6 cards on... 55-60H/s per card

Otherwise, everything is pretty stable, been mining ETH for months

TheKoolaider

member

Activity: 84

Merit: 10

Putting in my two cents.

XFX RX480 8GB x6(stock) - crashes at "-i 2." Currently testing default settings to see if rig crashes again. *EDIT* Rig crashes on stock settings and default intensity. I would also like to add that at 4 GPUs the rig was stable, I just added two more cards tonight, and now I'm experiencing the crashing. Any ideas? I have PCI set to Gen 2, is Gen 1 necessary? This rig has a cheapo dual core cpu, 4gb of ram and h81 btc mobo.

MSI RX480 8gb x4(Memory clock 2200, Core clock stock) - Runs fine, no crashes. "-i 2" setting.

manoe

newbie

Activity: 51

Merit: 0

Quote from: snakey on November 10, 2016, 07:50:24 PM

Anyone getting good results with Sapphire rx470 8gb?

only getting around 60 - 64.

A little help please?

https://youtu.be/uy0roLG7ARc
Good video to learn how to set your timings hope its helping

mirny

legendary

Activity: 1108

Merit: 1005

Quote from: Vasyok55555 on November 10, 2016, 07:34:51 PM

Colleagues, how to use, and that means "View miner console" ?

I see question mark, so I think this is question. But it doesn't make sense at all...

deucedeuce37

newbie

Activity: 11

Merit: 0

Quote from: mettalmag on November 10, 2016, 07:56:22 PM

Quote from: gary_aut on November 10, 2016, 07:47:14 PM

Quote from: mettalmag on November 10, 2016, 06:40:54 PM

is there any possibility to upgrade miner versions on all rigs at once ?
it would be damn helpful because I have to spend 3+ hrs a day to keep up with updates
I'm not complaining, I'm glad that speed is growing and growing

There are many ways to keep your Rigs up to date:

special Software that can handle scripted SW Updates, full API Access miners through eg. Awesome Miner, write your own scripts when the files are on same place on all rigs, .....

Isn´t it a fulltime Job to manage (update, cleaning, repairing) so many rigs ?

147 x RX480 a 70 SOLs = 10290 SOLs
31KW @ 20 Cent/KWh

thats means round about 10.ooo Dollar p.M. income ^^

there's a catch, I have only own % from this farm + maintaining fee, but awesome miner makes sense and does really good job, I'll think about it

It would be really easy to add a section to your startup.bat file that would check a network share for new files every time you reboot. Then it could copy that over to the machine before launching claymore. Just leave config.txt off of the network share so you don't overwrite your worker names.

Then write a powershell script to reboot your machines one at a time with a short timeout between each system to avoid too much inrush or overloading your network share.

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 636. (Read 3839201 times)