Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 633.

mitache365

hero member

Activity: 732

Merit: 500

Quote from: z0n0 on November 11, 2016, 05:22:33 AM

Sorry guys - bit off question:
I just sold 2 of my 3 yrs old 280x (got 285 EUR for them). Do you think I should buy new 480 for this money?
Or better spend it on bitchez & drinks?

Roll Eyes

second sounds good Cheesy

omshree

full member

Activity: 270

Merit: 100

Hi all, HD 7990 gets 150h w stock bios @63C Insane, thank you Claymore

AltcoinScamfinder

hero member

Activity: 840

Merit: 500

Quote from: Altcoining on November 11, 2016, 05:45:14 AM

Quote from: HardwarePal on November 11, 2016, 05:32:10 AM

Miner shut down last night

Windows log

The access history in hive \SystemRoot\System32\config\DRIVERS was cleared updating 925 keys and creating 101 modified pages.

Try running hwinfo64 and log to a file, if it happens again you could check for voltage problems, heat problems etc afterwards.

In a possibly related question. What is the likeliness that the remote admin utility can be used to gain access to data on a computer running the mining client?

Nippy-ua

newbie

Activity: 48

Merit: 0

RX470 4gb ~65-70
RX480 8gb ~65-70

Altcoining

full member

Activity: 138

Merit: 100

Quote from: HardwarePal on November 11, 2016, 05:32:10 AM

Miner shut down last night

Windows log

The access history in hive \SystemRoot\System32\config\DRIVERS was cleared updating 925 keys and creating 101 modified pages.

Try running hwinfo64 and log to a file, if it happens again you could check for voltage problems, heat problems etc afterwards.

HardwarePal

hero member

Activity: 565

Merit: 500

Miner shut down last night

Windows log

The access history in hive \SystemRoot\System32\config\DRIVERS was cleared updating 925 keys and creating 101 modified pages.

mewhoyou

sr. member

Activity: 353

Merit: 250

   Worker Hide Offline   Last Share   Now   6h
1    1 11 minutes ago   369.2 Sol/s   325.1 Sol/s <--- 5 x RX 470
2    2 11 minutes ago   379.6 Sol/s   377.2 Sol/s <--- 6 x RX 470
3    3 11 minutes ago   192.4 Sol/s   194.4 Sol/s <--- 3 x RX 470
4 4 11 minutes ago   135.2 Sol/s   132.3 Sol/s <-- 2 x RX 470

strapped rom at 1500 nothing else except for -100mv. I should be able to get 5% to 10% higher if i did not use -100mv

Numbers are higher on my rigs.

gregor12

newbie

Activity: 52

Merit: 0

Quote from: NameTaken on November 11, 2016, 05:24:21 AM

Quote from: gregor12 on November 11, 2016, 05:15:50 AM

Guys I got 1500W power supply and RIG is drawing 1400W, should I add another 750W power supply to power motherboard and the 1500W for the GPUS? Anyone got experience with this? I don't like to load my power supply with more then 80%, I feel if I keep it running at 90 or 95% will will get fried in a couple of days.

PSUs are rated by DC power output so a 1500W PSU supplying 1500W would be drawing ~1700W AC power from the wall depending on efficiency. 1400W from the wall means the PSU is supplying ~1250W = 83% of 1500W.

Oh I didn't know that, thanks!

z0n0

legendary

Activity: 1274

Merit: 1006

Quote from: bittawm on November 11, 2016, 05:24:16 AM

Quote from: z0n0 on November 11, 2016, 05:22:33 AM

Sorry guys - bit off question:
I just sold 2 of my 3 yrs old 280x (got 285 EUR for them). Do you think I should buy new 480 for this money?
Or better spend it on bitchez & drinks?

Roll Eyes

bitches and drinx

Ma' man

thought so...

NameTaken

hero member

Activity: 630

Merit: 502

Quote from: gregor12 on November 11, 2016, 05:15:50 AM

Guys I got 1500W power supply and RIG is drawing 1400W, should I add another 750W power supply to power motherboard and the 1500W for the GPUS? Anyone got experience with this? I don't like to load my power supply with more then 80%, I feel if I keep it running at 90 or 95% will will get fried in a couple of days.

PSUs are rated by DC power output so a 1500W PSU supplying 1500W would be drawing ~1700W AC power from the wall depending on efficiency. 1400W from the wall means the PSU is supplying ~1250W = 83% of 1500W.

bittawm

legendary

Activity: 1894

Merit: 1087

Quote from: z0n0 on November 11, 2016, 05:22:33 AM

Sorry guys - bit off question:
I just sold 2 of my 3 yrs old 280x (got 285 EUR for them). Do you think I should buy new 480 for this money?
Or better spend it on bitchez & drinks?

Roll Eyes

bitches and drinx

Altcoining

full member

Activity: 138

Merit: 100

Quote from: gregor12 on November 11, 2016, 05:15:50 AM

Guys I got 1500W power supply and RIG is drawing 1400W, should I add another 750W power supply to power motherboard and the 1500W for the GPUS? Anyone got experience with this? I don't like to load my power supply with more then 80%, I feel if I keep it running at 90 or 95% will will get fried in a couple of days.

As long as your temps are okay, you should be fine.

z0n0

legendary

Activity: 1274

Merit: 1006

Sorry guys - bit off question:
I just sold 2 of my 3 yrs old 280x (got 285 EUR for them). Do you think I should buy new 480 for this money?
Or better spend it on bitchez & drinks?

Roll Eyes

gregor12

newbie

Activity: 52

Merit: 0

Guys I got 1500W power supply and RIG is drawing 1400W, should I add another 750W power supply to power motherboard and the 1500W for the GPUS? Anyone got experience with this? I don't like to load my power supply with more then 80%, I feel if I keep it running at 90 or 95% will will get fried in a couple of days.

ultralord

newbie

Activity: 29

Merit: 0

Quote from: Ursul0 on November 11, 2016, 05:06:33 AM

@Claymore
looks like some sync related bug - I've got a mixed rig here: it has 370, 470 and 480s.
If I run different intensity (2 for 400 and 1 for 370) I get about 15% of shares rejected.
If all is set to "-i 2" - no problem, rejects below 1%

What rates are you getting for your 370 and what clock settings?

Ursul0

sr. member

Activity: 857

Merit: 262

@Claymore
looks like some sync related bug - I've got a mixed rig here: it has 370, 470 and 480s.
If I run different intensity (2 for 400 and 1 for 370) I get about 15% of shares rejected.
If all is set to "-i 2" - no problem, rejects below 1%

pwpwpw

hero member

Activity: 908

Merit: 503

Quote from: semajjames on November 11, 2016, 04:11:50 AM

Quote from: boysie on November 11, 2016, 01:24:05 AM

I got this output on v4.0

ZEC - Total Speed: 234.442 H/s, Total Shares: 12, Rejected: 0, Time: 00:00
ZEC: GPU0 77.947 H/s, GPU1 77.873 H/s, GPU2 0.000 H/s, GPU3 78.623 H/s
ZEC: 11/11/16-06:17:20 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:22 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 11/11/16-06:17:29 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (32 ms)!
ZEC: 11/11/16-06:17:31 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (47 ms)!
GPU0 t=53C fan=5%, GPU1 t=66C fan=2%, GPU2 t=68C fan=57%, GPU3 t=67C fan=79%
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
Restarting OK, exit...

there is no GPU4 or 5 and its GPU2 that hung.

thanks

Boysie

GPU 3

I have the same thing, one card fails, had no problems with v1-v3, using i=0, what exactly changed in v4? Problem is that the miner restarts with one less gpu after the hang. Is there a way to simply close the miner instead of restarting ? I mean close with like pressing key Q instead of taskkill, if taskkill is used then it crashes the PC sometimes.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

any ideas how to mine with two workers in config one with 95$ other one with 5%

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

when launching the miner what is the top line state

Hotmetal

sr. member

Activity: 378

Merit: 250

Quote from: semajjames on November 11, 2016, 04:11:50 AM

Quote from: boysie on November 11, 2016, 01:24:05 AM

I got this output on v4.0

ZEC - Total Speed: 234.442 H/s, Total Shares: 12, Rejected: 0, Time: 00:00
ZEC: GPU0 77.947 H/s, GPU1 77.873 H/s, GPU2 0.000 H/s, GPU3 78.623 H/s
ZEC: 11/11/16-06:17:20 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:22 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 11/11/16-06:17:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 11/11/16-06:17:29 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (32 ms)!
ZEC: 11/11/16-06:17:31 - SHARE FOUND - (GPU 3)
ZEC: Share accepted (47 ms)!
GPU0 t=53C fan=5%, GPU1 t=66C fan=2%, GPU2 t=68C fan=57%, GPU3 t=67C fan=79%
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 4 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
WATCHDOG: GPU 5 hangs in OpenCL call, exit
Restarting OK, exit...

there is no GPU4 or 5 and its GPU2 that hung.

thanks

Boysie

GPU 3

What exactly does GPU 3 mean / imply?

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 633. (Read 3839201 times)