Adjust the power limit and be happy 54~56 Hash/s with RX480 8GB
dude you getting 52sol/s on that card alone?
What did you do?
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 730. (Read 3839185 times)
dude you getting 52sol/s on that card alone?
What did you do?
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) for litecoin not zec or eth. consume half that
ETH is about 30% more hungry on power than ZEC ming
What gpu-z are reporting is irrelevant.
That number is what the gpu onboard your card are pulling, not all the rest.
It's not irrelevant, it's just not a real figure as those measured at the wall.
I've mined with 270x, 7950, 7850, 7970, and I know what I'm talking about!
Old cards are very inefficient. That's a fact!
Besides being noisy and generating a lot of heat.
GPU-Z readings are a good way to compare efficiency between different cards, or different setting for the same card.
Therefore, they're not irrelevant. In fact, they are very useful
wow nice man....
I have the 8gb version....do you have any settings for those cards?
This is my config.txt:
-zpool zec-eu1.nanopool.org:6666
-zwal [ZEC address]
-zpsw x
-allpools 1
-ftime 15
-dbg -1
-tt 75
-ttli 85
-tstop 90
-cclock 900
-cvddc 800
-mclock 1750
-mvddc 800
-powlim -10
It works flawlessly fot the Sapphire RX 480 Nitro+ OC 4GB
Give it a try
How many sol/s are you getting with that and how many watts, psu?
Thanks dude, appreciate it...
wow nice man....
I have the 8gb version....do you have any settings for those cards?
This is my config.txt:
-zpool zec-eu1.nanopool.org:6666
-zwal [ZEC address]
-zpsw x
-allpools 1
-ftime 15
-dbg -1
-tt 75
-ttli 85
-tstop 90
-cclock 900
-cvddc 800
-mclock 1750
-mvddc 800
-powlim -10
It works flawlessly fot the Sapphire RX 480 Nitro+ OC 4GB
Give it a try
Next update is bug-fixes only.
300ms is a server response time, it depends on your internet connection, pool location and its quality.
Please, launch linux version!!!
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) a bit more?
I'm getting ~35 sols out of my RX 480 4GB consuming less than 40 watt!!!
No heat, no noise, no GPU stress!
That's efficiency!
That number is what the gpu onboard your card are pulling, not all the rest.
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) a bit more?
I'm getting ~35 sols out of my RX 480 4GB consuming less than 40 watt!!!
No heat, no noise, no GPU stress!
That's efficiency!
wow nice man....
I have the 8gb version....do you have any settings for those cards?
Stock BIOS is best to use with 4XX cards here. Actually got better speeds when flashing back to stock from my ETH mod BIOS.
What hashrate do you get with stock bioses ?My numbers with strap modded bioses.
470: 45-46 s/s
480: 49-50s/s
what config you use clock, mem, times ?
480: GPU: stock, Mem: 2200Mhz. 1500strap mod
Bat file made to restart claymore miner once per hour.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 5
@echo off
echo:
set executable=ZecMiner64.exe
set commandline= -zpool equihash.eu.nicehash.com:3357 -zwal BTCADRESS.RIGNAME -zpsw x -allpools 1
set runforseconds=3600
set restartinseconds=5
set /a counter=0
timeout 5
:start
start "genoil" %executable% %commandline%
echo:
echo The software will run for %runforseconds% seconds
timeout %runforseconds%
taskkill /f /im %executable%
echo:
echo Restarting the software in %restartinseconds% seconds (%counter%)
timeout %restartinseconds%
set /a counter+=1
echo:
echo:
goto start
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) a bit more?
I'm getting ~35 sols out of my RX 480 4GB consuming less than 40 watt!!!
No heat, no noise, no GPU stress!
That's efficiency!
Miner is working fine but I noticed it disconnects and joins "flypool and nanopool" ....much longer then 90 sec if thats for the dev?
https://bitcointalksearch.org/topic/m.16777816
Thank you...
Can we expect better speeds on the 470 and 480 cards in your next update?
Also when I find shares it says (300ms and over) How can I make that faster?
Thanks
Next update is bug-fixes only.
300ms is a server response time, it depends on your internet connection, pool location and its quality.
Thank you....
Will that affect my shares or how fast I can find sol/s?
Also, when my miner disconnects and joins those other random pools does that go to my zec wallet until you fix the problem?
Do you see more sol/s for those cards though? any room to move?
Nice Work claymore! My 270x Vapor X runs 30-34 sols/s
And miner runs great without an issue thx dude!
And miner runs great without an issue thx dude!
Miner is working fine but I noticed it disconnects and joins "flypool and nanopool" ....much longer then 90 sec if thats for the dev?
https://bitcointalksearch.org/topic/m.16777816
Thank you...
Can we expect better speeds on the 470 and 480 cards in your next update?
Also when I find shares it says (300ms and over) How can I make that faster?
Thanks
Next update is bug-fixes only.
300ms is a server response time, it depends on your internet connection, pool location and its quality.
Stock BIOS is best to use with 4XX cards here. Actually got better speeds when flashing back to stock from my ETH mod BIOS.
What hashrate do you get with stock bioses ?My numbers with strap modded bioses.
470: 45-46 s/s
480: 49-50s/s
what config you use clock, mem, times ?
Miner is working fine but I noticed it disconnects and joins "flypool and nanopool" ....much longer then 90 sec if thats for the dev?
https://bitcointalksearch.org/topic/m.16777816
Thank you...
Can we expect better speeds on the 470 and 480 cards in your next update?
Also when I find shares it says (300ms and over) How can I make that faster?
Thanks
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) for litecoin not zec or eth. consume half that
EDIT: Another general improvement in this context: after third unsuccesful connection attempt it still waits 20 seconds before trying to connect with next failover pool. Also not the optimum in this place. If using shorter failover recovery times this sums up to quite some percent of the overall hash power.
Ok I will add an option to adjust default 20sec delay.
HD7950=RX480 with 50 h/s
OMG!
Yap OMG!
it's great .. the only problem is that 7950 consume a little bit more then RX480 ( from what I saw , one 7950 consume ~ 270 w) Miner is working fine but I noticed it disconnects and joins "flypool and nanopool" ....much longer then 90 sec if thats for the dev?
https://bitcointalksearch.org/topic/m.16777816
HD7950=RX480 with 50 h/s
OMG!
OMG!
I got old 7950, that stock?
How many watts it using?
Jump to: