Guys if I want to set my miners to auto restart every 60 minutes how and where I'm supposed to use the -r command?
On my start.bat or my config file?
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 725. (Read 3839391 times)
v1.1:
- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
- added Linux version.
- fixed issue with rejected shares after devfee mining.
- remove "-allpools 1" option if you use it and mine on miningpoolhub, suprnova, coinmine or nicehash pools.
- added "XnSub" support for Nicehash.
- fixed bugs.
PS. Read OP or Readme for updated samples of using on different pools.
Set and forget. 24h run, no problems.
Claymore, can u set "disable crossfire" by default?
Claymore, can u set "disable crossfire" by default?
Claymore, first of all thanks for the great miner!
I have this one issue though and I'm not the only one as I can see in this thread others report it too.
The miner and ethman shows temp/fan only for one card, GPU0.
I got 4 rigs with 6 cards each RX470/480s Win 10 Pro 64bit, latest crimson drivers.
I had this same issue with your eth dual miner too, with older drivers too.
Every now and then it shows all 6 cards after a reboot but most of the time it doesn't.
I have this one issue though and I'm not the only one as I can see in this thread others report it too.
The miner and ethman shows temp/fan only for one card, GPU0.
I got 4 rigs with 6 cards each RX470/480s Win 10 Pro 64bit, latest crimson drivers.
I had this same issue with your eth dual miner too, with older drivers too.
Every now and then it shows all 6 cards after a reboot but most of the time it doesn't.
Ok waiting to all showed 0 H/s on Suprnova took about 10+ minutes and restarting my hashing is not stalling.
AMD Cards available: 3
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Tonga, 4096 MB available, 32 compute units
POOL/SOLO version
Total cards: 3
One question though why is my XFX R9 380X not recognized by the miner? Is that why it is only getting only around 33 H/s while the R9 280X is getting 40 H/s?
It still wants to set difficulty too high I'll see if it stabilizes but I have no idea if it does not what I should set it to.
AMD Cards available: 3
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Tonga, 4096 MB available, 32 compute units
POOL/SOLO version
Total cards: 3
One question though why is my XFX R9 380X not recognized by the miner? Is that why it is only getting only around 33 H/s while the R9 280X is getting 40 H/s?
Code:
Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s
Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s
ZEC: 11/05/16-13:00:18 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=58C fan=33%, GPU1 t=54C fan=68%, GPU2 t=60C fan=51%
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=60C fan=51%
Pool sets new share target: 0x000f4c40 (diff: 4284H)
ZEC: 11/05/16-13:01:04 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.501 H/s, Total Shares: 50, Rejected: 0, Time: 00:03
ZEC: GPU0 40.673 H/s, GPU1 43.028 H/s, GPU2 30.800 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
GPU0 t=61C fan=36%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-13:01:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (125 ms)!
GPU0 t=61C fan=36%, GPU1 t=57C fan=68%, GPU2 t=61C fan=52%
It still wants to set difficulty too high I'll see if it stabilizes but I have no idea if it does not what I should set it to.
I give 50 H/s with R9 390x and 30 Mh/z with R9 280x and 40 M/H with R9 380 in nanopool.... !!!
that's great
is any pool will better it?
that's great
is any pool will better it?
Hello, All 
RIG Config:
6x Sapphire Radeon RX470 Nitro+
Asrock PRO BTC H81
Intel Celeron G1840
16 GB DDR3
SSD 128mb
Corsair AX1200i
Windows Server 2012 R2
All environment variables is set.
I'am can start Claymore's ZCash AMD GPU Miner if connect 4 GPU. It is ok & works very well.
If I add 5 or 6 GPU. Miner is froze at log:
This may be at hour and more time and never started. 6x GPU Mod was installed. Any other alghoritms excellent works at 6x GPU.
What can I do to run 6 cards? Thx.
-----
P.s. Claymore, thx. Very good miner. Excellent job
RIG Config:
6x Sapphire Radeon RX470 Nitro+
Asrock PRO BTC H81
Intel Celeron G1840
16 GB DDR3
SSD 128mb
Corsair AX1200i
Windows Server 2012 R2
All environment variables is set.
I'am can start Claymore's ZCash AMD GPU Miner if connect 4 GPU. It is ok & works very well.
If I add 5 or 6 GPU. Miner is froze at log:
Code:
14:09:35:775 b14 Main ZCash pool is zec.suprnova.cc:2142
14:09:36:462 b14 OpenCL platform: AMD Accelerated Parallel Processing
14:09:36:462 b14 OpenCL initializing...
14:09:36:462 b14 AMD Cards available: 6
14:09:36:462 b14 GPU #0: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 GPU #1: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 GPU #2: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 GPU #3: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 GPU #4: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 GPU #5: Ellesmere, 8192 MB available, 32 compute units
14:09:36:462 b14 POOL/SOLO version
14:09:36:462 b14 b100
14:09:36:462 b14 Platform: Windows
14:09:36:494 b14 start building OpenCL program...
14:09:59:260 b14 done
14:09:59:276 b14 Total cards: 6
This may be at hour and more time and never started. 6x GPU Mod was installed. Any other alghoritms excellent works at 6x GPU.
What can I do to run 6 cards? Thx.
-----
P.s. Claymore, thx. Very good miner. Excellent job
OCMiner. Yes it maybe a refreshing issue. I stopped all miners and even after hitting update workers several times it still has not gone down to 0 H/s. I'll keep updating to it's showing no H/s than will try again.
And that is after about 3-5 minutes. It still thinks it is seeing some minor hashing. Does not appear to be refreshing/updating properly at all.
And that is after about 3-5 minutes. It still thinks it is seeing some minor hashing. Does not appear to be refreshing/updating properly at all.
LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX?
Don't release Linux. It's just bad for all except chinese farms.
LINUX PLEASE!!!
LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX?
Don't release Linux. It's just bad for all except chinese farms.
Miner will not work for me at all! Help!
GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x
Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.
Alternatively you can always set your own diff through the password field like so:
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1
Which would give you a diff of 128
or
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1
A diff of 256
Ok here is a screenshot after running about 3 minutes after starting no change.
It is not moving.
Than I decided to press and it says this.
It basically said but would not copy and paste that miner thread hung and restarting. What should I set target difficulty for these 3 cards realistically?
Currently it's nuts.. I definitely need to lock it at a rate..
GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x
Code:
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1
Quote
Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.
Alternatively you can always set your own diff through the password field like so:
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1
Which would give you a diff of 128
or
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1
A diff of 256
Ok here is a screenshot after running about 3 minutes after starting no change.
It is not moving.
Than I decided to press
It basically said but would not copy and paste that miner thread hung and restarting. What should I set target difficulty for these 3 cards realistically?
Currently it's nuts.. I definitely need to lock it at a rate..
Quote
Pool sets new share target: 0x0067b1a6 (diff: 632H)
ZEC: 11/05/16-12:20:18 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.582 H/s, Total Shares: 22, Rejected: 0, Time: 00:02
ZEC: GPU0 40.628 H/s, GPU1 42.777 H/s, GPU2 31.177 H/s
ZEC: 11/05/16-12:20:23 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-12:20:25 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-12:20:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=61C fan=52%
Pool sets new share target: 0x00212e9b (diff: 1975H)
ZEC: 11/05/16-12:20:39 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 110.445 H/s, Total Shares: 25, Rejected: 0, Time: 00:02
ZEC: GPU0 39.496 H/s, GPU1 41.310 H/s, GPU2 29.640 H/s
ZEC: 11/05/16-12:20:44 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
Pool sets new share target: 0x000f7c26 (diff: 4232H)
ZEC: 11/05/16-12:20:46 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.816 H/s, Total Shares: 26, Rejected: 0, Time: 00:02
ZEC: GPU0 41.130 H/s, GPU1 42.008 H/s, GPU2 30.677 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-12:21:06 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x0016b616 (diff: 2885H)
ZEC: 11/05/16-12:21:10 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.899 H/s, Total Shares: 27, Rejected: 0, Time: 00:03
ZEC: GPU0 41.688 H/s, GPU1 42.961 H/s, GPU2 31.249 H/s
ZEC: 11/05/16-12:20:18 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.582 H/s, Total Shares: 22, Rejected: 0, Time: 00:02
ZEC: GPU0 40.628 H/s, GPU1 42.777 H/s, GPU2 31.177 H/s
ZEC: 11/05/16-12:20:23 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-12:20:25 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-12:20:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=61C fan=52%
Pool sets new share target: 0x00212e9b (diff: 1975H)
ZEC: 11/05/16-12:20:39 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 110.445 H/s, Total Shares: 25, Rejected: 0, Time: 00:02
ZEC: GPU0 39.496 H/s, GPU1 41.310 H/s, GPU2 29.640 H/s
ZEC: 11/05/16-12:20:44 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
Pool sets new share target: 0x000f7c26 (diff: 4232H)
ZEC: 11/05/16-12:20:46 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.816 H/s, Total Shares: 26, Rejected: 0, Time: 00:02
ZEC: GPU0 41.130 H/s, GPU1 42.008 H/s, GPU2 30.677 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-12:21:06 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x0016b616 (diff: 2885H)
ZEC: 11/05/16-12:21:10 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.899 H/s, Total Shares: 27, Rejected: 0, Time: 00:03
ZEC: GPU0 41.688 H/s, GPU1 42.961 H/s, GPU2 31.249 H/s
[/quote]
Could you check your hashrate in -> Edit Account -> My Workers ?
Maybe the Dashboard is not updating
Looks like right now if you have any RX 470/480
ETC PROFITABILITY = ZEC PROFITABILITY
Still more profitable to mine ZEC on 280x however.
Going by Nicehash and Whattomine data
ETC PROFITABILITY = ZEC PROFITABILITY
Still more profitable to mine ZEC on 280x however.
Going by Nicehash and Whattomine data
How do you figure? What ETC hash rate do you squeeze out of a 470? Or 390 for that matter?
Yeah, Linux version would be great. It's just the obvious choice for big headless farms.
LINUXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX?
@ Claymore
Waiting linux version
Waiting linux version
will you ever do a cpu miner like xmr cpu miner or a M7M gpu miner?
gpu-z only shows draw from pcie, which I think for newer cards is mostly memory related
Even so, If I'm getting 35 sols drawing 40w and someone else is getting 50 sols drawing 100w how can that be irrelevant?
You do the math
PS: I pay for my electric bill!
It's not completely irrelevant. But you absolutely CANNOT accurately use GPUz power draw to compare different cards because they all have different power characteristics. It's only good for doing apples to apples comparisons.
For example, mining Ethereum, I have RX480s that say 70~75w in GPUz but this relates to more like 120w from the wall. So a 50w difference.
But my 290x, say around 130w in GPUz, but 200w from the wall, that's a 70w difference.
Basically, you have almost no way of telling actual power draw from the wall with GPUz, it's just a guessing game. And power draw from the wall is what actually counts.
And why do you need 2 x 850w PSU to power 6 x RX480? Even mining Ethereum at 180mh/s my 6 x RX480 only pull 810w, from the wall. You certainly don't need it for ZCash, I'm not even pulling 600w from the wall.
Really 600w for 6 480s, thats crazy.....Would 470s be slightly lower?
Oh yeah.. I got 3 470 rigs (all MSI RX470 4GB) doing 530-550W at the wall and I think I can go even lower
Can anyone else share similar details please and what works best for you?
Anything to add or edit? (using rx 470 and 480 8gb cards)
-ftime 15
-dbg -1
-tt 75
-ttli 85
-tstop 90
-cclock 900
-cvddc 800
-mclock 1750
-mvddc 800
-powlim -10
Any help would be much appreciated.
Anything to add or edit? (using rx 470 and 480 8gb cards)
-ftime 15
-dbg -1
-tt 75
-ttli 85
-tstop 90
-cclock 900
-cvddc 800
-mclock 1750
-mvddc 800
-powlim -10
Any help would be much appreciated.
How does it compare with and without?
@Claymore, can you please consider raising the window before disconnecting your miner after not receiving a new job from the pool? Zcash blocks can sometimes take a bit longer, for instance the last 6 blocks took more than 36 minutes when they were supposed to be 15 min in average.
Jump to: