Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 726.

mewhoyou

sr. member

Activity: 353

Merit: 250

Quote from: snakey on November 05, 2016, 08:00:26 AM

Can anyone else share similar details please and what works best for you?

Anything to add or edit? (using rx 470 and 480 8gb cards)

-ftime 15
-dbg -1
-tt 75
-ttli 85
-tstop 90
-cclock 900
-cvddc 800
-mclock 1750
-mvddc 800
-powlim -10

Any help would be much appreciated.

How does it compare with and without?

mmitech

legendary

Activity: 1148

Merit: 1001

things you own end up owning you

@Claymore, can you please consider raising the window before disconnecting your miner after not receiving a new job from the pool? Zcash blocks can sometimes take a bit longer, for instance the last 6 blocks took more than 36 minutes when they were supposed to be 15 min in average.

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: Onespec on November 05, 2016, 11:54:37 AM

I'm mine on Coinmine.pl. and this "40s to 60 MILIseconds" usual ping from me to pool. And this good for me.
Yours 300 Ms too many for minig, change server maybe.

yup i know what ms is.

im on evdo wireless. its 3g. and 300s is about as good as i gets for me

200s in speedtest. two rigs at the moment.

got about the same at nicehash. should try some more pools though, but doesnt seem to effect my hash rate. my 390s and 380 get about the same as others. some a bit higher, some lower.

molitar

sr. member

Activity: 322

Merit: 250

Quote from: ocminer on November 05, 2016, 12:09:14 PM

Quote from: molitar on November 05, 2016, 11:58:21 AM

Miner will not work for me at all! Help!

GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x

Code:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1

Quote

Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.

Alternatively you can always set your own diff through the password field like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1

Which would give you a diff of 128

or

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1

A diff of 256

Ok here is a screenshot after running about 3 minutes after starting no change.

It is not moving.

Than I decided to press and it says this.

It basically said but would not copy and paste that miner thread hung and restarting. What should I set target difficulty for these 3 cards realistically?

Currently it's nuts.. I definitely need to lock it at a rate..

Quote

Pool sets new share target: 0x0067b1a6 (diff: 632H)
ZEC: 11/05/16-12:20:18 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.582 H/s, Total Shares: 22, Rejected: 0, Time: 00:02
ZEC: GPU0 40.628 H/s, GPU1 42.777 H/s, GPU2 31.177 H/s
ZEC: 11/05/16-12:20:23 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-12:20:25 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-12:20:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=61C fan=52%
Pool sets new share target: 0x00212e9b (diff: 1975H)
ZEC: 11/05/16-12:20:39 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 110.445 H/s, Total Shares: 25, Rejected: 0, Time: 00:02
ZEC: GPU0 39.496 H/s, GPU1 41.310 H/s, GPU2 29.640 H/s
ZEC: 11/05/16-12:20:44 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
Pool sets new share target: 0x000f7c26 (diff: 4232H)
ZEC: 11/05/16-12:20:46 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.816 H/s, Total Shares: 26, Rejected: 0, Time: 00:02
ZEC: GPU0 41.130 H/s, GPU1 42.008 H/s, GPU2 30.677 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-12:21:06 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x0016b616 (diff: 2885H)
ZEC: 11/05/16-12:21:10 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.899 H/s, Total Shares: 27, Rejected: 0, Time: 00:03
ZEC: GPU0 41.688 H/s, GPU1 42.961 H/s, GPU2 31.249 H/s

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: molitar on November 05, 2016, 11:58:21 AM

Miner will not work for me at all! Help!

GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1

Code:

AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
POOL/SOLO version
Total cards: 1
ZEC: Stratum - connecting to 'zec.suprnova.cc' <46.105.114.185> port 2142
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details
Watchdog enabled
Remote management is enabled on port 3333

ZEC: Stratum - Connected (zec.suprnova.cc:2142)
Pool sets new share target: 0x00f0f0f0 (diff: 272H)
ZEC: Authorized
ZEC: 11/05/16-11:52:04 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:07 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:09 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:10 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
GPU0 t=39C fan=23%, GPU1 t=54C fan=68%, GPU2 t=37C fan=30%
ZEC: 11/05/16-11:52:14 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:18 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:34 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x00505050 (diff: 816H)
ZEC: 11/05/16-11:52:36 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 43.430 H/s, Total Shares: 9, Rejected: 0, Time: 00:00
ZEC: GPU0 43.430 H/s
(hung at this point no more hashing!)

It hangs no matter how many cards I choose..

Looks like you're being retarget slightly too high from the pool, just wait about 1 minute and you should automatically be targeted down again.

Alternatively you can always set your own diff through the password field like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=128 -allpools 1 -di 1

Which would give you a diff of 128

or

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw d=256 -allpools 1 -di 1

A diff of 256

Quote from: DeCrypterManiac on November 05, 2016, 12:06:29 PM

Anyone got this working stable with suprnova ? There's 0% fee ...

What problem have you got ? Should work fine

DeCrypterManiac

hero member

Activity: 550

Merit: 500

Anyone got this working stable with suprnova ? There's 0% fee ...

wpalczynski

legendary

Activity: 1456

Merit: 1000

Quote from: IOTUSA on November 05, 2016, 11:26:30 AM

Quote from: wpalczynski on November 04, 2016, 04:08:31 PM

Quote from: dakky on November 04, 2016, 03:03:43 PM

Win 10, 16.11.1 hotfix, 4x XFX 480 8GB = 155-160sols/s not overclocked or modified
Win 7, 16.9.2, 1x 280X + 1x 290 = 89sols/s
Win 10, 15.7.1, 3x 280X + 1x 270X = 164 sols/s

Really nice!

Any custom parameters for the 290 rig? I seem to only be getting between 36-33 a card.

I am getting 45 sol/s on 2 x 290 for a total of 90 sol/s completely stock. With default mem/core, no mods, no bios, and just latest calalyst.

Could you post you start bat file so I can see what environment parameters you are setting if any pls? I cannot get over 70 off two cards.

molitar

sr. member

Activity: 322

Merit: 250

Miner will not work for me at all! Help!

GPU0: R9 280x
GPU1: RX 480
GPU2: R9 380x

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal molitar.miner1 -zpsw pass1 -allpools 1 -di 1

Code:

AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
POOL/SOLO version
Total cards: 1
ZEC: Stratum - connecting to 'zec.suprnova.cc' <46.105.114.185> port 2142
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details
Watchdog enabled
Remote management is enabled on port 3333

ZEC: Stratum - Connected (zec.suprnova.cc:2142)
Pool sets new share target: 0x00f0f0f0 (diff: 272H)
ZEC: Authorized
ZEC: 11/05/16-11:52:04 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:07 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:09 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:10 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
GPU0 t=39C fan=23%, GPU1 t=54C fan=68%, GPU2 t=37C fan=30%
ZEC: 11/05/16-11:52:14 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:18 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:23 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (141 ms)!
ZEC: 11/05/16-11:52:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 11/05/16-11:52:34 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
Pool sets new share target: 0x00505050 (diff: 816H)
ZEC: 11/05/16-11:52:36 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 43.430 H/s, Total Shares: 9, Rejected: 0, Time: 00:00
ZEC: GPU0 43.430 H/s
(hung at this point no more hashing!)

It hangs no matter how many cards I choose..

Onespec

newbie

Activity: 29

Merit: 0

Quote from: vapourminer on November 05, 2016, 11:29:32 AM

Quote from: wtfonly16 on November 05, 2016, 11:12:31 AM

been mining since claymore released miner and average hashrate is reported correctly. so any devfee mining its doing is proper, i dont get any rejected shares. maybe check your pool guys?

same here, no rejects after devfee mining on 1.0. using -allpools at supernova.

onespec your time between shares is in the mainly in the 40s to 60s, mine is the 300s. maybe that has something to do with it? long shot but hey..

im at supernova btw.

I'm mine on Coinmine.pl. and this "40s to 60 MILIseconds" usual ping from me to pool. And this good for me.
Yours 300 Ms too many for minig, change server maybe.

I think Claymore need something to do with his DEVfee account.
Maybe add additional Devfee account to Coinmine.pl?

gloupsy

full member

Activity: 141

Merit: 100

I got this error when launching claymore's miner on 3 of my rigs

"error at hooking API NtProtectVirtualMemory"
can you help me to understand why please ?
I'm running it with 1x7970+2x7950 on 2 rigs,and another 1x r9 290, win7 64bit.

Toninho

hero member

Activity: 597

Merit: 500

Hey , for Nvidia GPU 1070 GTX Huh

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: wtfonly16 on November 05, 2016, 11:12:31 AM

been mining since claymore released miner and average hashrate is reported correctly. so any devfee mining its doing is proper, i dont get any rejected shares. maybe check your pool guys?

same here, no rejects after devfee mining on 1.0. using -allpools at supernova.

onespec your time between shares is in the mainly in the 40s to 60s, mine is the 300s. maybe that has something to do with it? long shot but hey..

im at supernova btw.

IOTUSA

sr. member

Activity: 504

Merit: 250

Quote from: wpalczynski on November 04, 2016, 04:08:31 PM

Quote from: dakky on November 04, 2016, 03:03:43 PM

Win 10, 16.11.1 hotfix, 4x XFX 480 8GB = 155-160sols/s not overclocked or modified
Win 7, 16.9.2, 1x 280X + 1x 290 = 89sols/s
Win 10, 15.7.1, 3x 280X + 1x 270X = 164 sols/s

Really nice!

Any custom parameters for the 290 rig? I seem to only be getting between 36-33 a card.

I am getting 45 sol/s on 2 x 290 for a total of 90 sol/s completely stock. With default mem/core, no mods, no bios, and just latest calalyst.

wtfonly16

full member

Activity: 285

Merit: 105

been mining since claymore released miner and average hashrate is reported correctly. so any devfee mining its doing is proper, i dont get any rejected shares. maybe check your pool guys?

Onespec

newbie

Activity: 29

Merit: 0

Hey Claymore
Fix this rejects after DEVFEE mining stop.

https://postimg.org/image/i9xbfh571/

jjiimm_64

legendary

Activity: 1876

Merit: 1000

Quote from: PPOC on November 05, 2016, 10:56:32 AM

Would be great to support extranonce.subscribe, provides a more stable connection and less stale when fast switching on the NH side.

We are not switching right??

Quote from: froilan_rivero on November 05, 2016, 10:55:10 AM

Claymore:

Mining with nicehas get rejected shares from time to time. Only viable solution is to restart often (every hour or so). Another thing according to nicehash the miner does not use "extranonce.subscribe" which hinders performance.

Thank you for such a great miner , keep the great work

apparently it is not adversely effecting performance

golden0707

full member

Activity: 189

Merit: 100

Quote from: adaseb on November 05, 2016, 08:57:33 AM

Quote from: golden0707 on November 05, 2016, 08:43:09 AM

Quote from: adaseb on November 05, 2016, 08:02:11 AM

For anyone with Radeon 7950 / 7970 / 280X who wants more juice out of ZEC mining you can adjust your timings.

Mine went from 43 Sol/s ---> 52 Sol/s. Running at 1100 / 1575

THIS IS ONLY FOR HYNIX MEMORY H5GQ2H24MFR . I will post Elpida and Samsung memory types later.

Thanks for sharing . Plz share info for Elpida memory 280xs as it appier. Ive got some of them.

I've modded some Elpida 280x before but I can't find them. If you search this forum, a few months ago someone made some optimized bioses for 380x and he posted the memory straps for the Elpida's. They are somewhere there.

Thanks ! I found some links , but now they are all 404. But Ill search more. Thanks for the tip man, it a good idea to sqeeze a little more from 280xs

woodaxe

member

Activity: 129

Merit: 10

Quote from: Jareklt on November 05, 2016, 10:42:51 AM

6xRX470 nitro 8G

Runs stable for 21h

is that a modded bios what settings

many thanks

PPOC

hero member

Activity: 575

Merit: 500

Quote from: froilan_rivero on November 05, 2016, 10:55:10 AM

Claymore:

Mining with nicehas get rejected shares from time to time. Only viable solution is to restart often (every hour or so). Another thing according to nicehash the miner does not use "extranonce.subscribe" which hinders performance.

Thank you for such a great miner , keep the great work

Would be great to support extranonce.subscribe, provides a more stable connection and less stale when fast switching on the NH side.

froilan_rivero

newbie

Activity: 25

Merit: 0

Claymore:

Mining with nicehas get rejected shares from time to time. Only viable solution is to restart often (every hour or so). Another thing according to nicehash the miner does not use "extranonce.subscribe" which hinders performance.

Thank you for such a great miner , keep the great work

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 726. (Read 3839163 times)