has anyone hit on anything over 2.2 GH/s on this last batch that shipped other then the very first ones they sold for BTC2.1
I find it disturbing that every one is posting 2.2 GH/s .. Almost like we got sold a Pinto when we were told we would get a mustang
Topic: [CLOSED] 0.9 OR LESS ~ BPMC "BLUE FURY" 2.7 GH/s USB MINER! SSINC GB#9! - page 2. (Read 56363 times)
November 03, 2013, 04:58:03 AM
November 03, 2013, 01:29:38 AM
yay i got mine in today getting about 67% hardware errors linux bfgminer
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
The RST is Reset and the PRG is to reprogram if you do a firmware update.
I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?
i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android
and is there a way to have one computer to run both usb BE and usb BF?
p.s. i still haven't received a compensation btc... =)
thank you for the compensation btc.
i will try that out later and report back thanks
November 02, 2013, 11:28:19 PM
yay i got mine in today getting about 67% hardware errors linux bfgminer
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
The RST is Reset and the PRG is to reprogram if you do a firmware update.
I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?
i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android
and is there a way to have one computer to run both usb BE and usb BF?
p.s. i still haven't received a compensation btc... =)
November 02, 2013, 10:56:39 PM
yay i got mine in today getting about 67% hardware errors linux bfgminer
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
The RST is Reset and the PRG is to reprogram if you do a firmware update.
I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?
i compiled his newest one. 3.4.0 i don't kno where to get the 3.0.99 version, i have to compile cause i run arm android
and is there a way to have one computer to run both usb BE and usb BF?
p.s. i still haven't received a compensation btc... =)
November 02, 2013, 10:06:43 PM
yay i got mine in today getting about 67% hardware errors linux bfgminer
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
The RST is Reset and the PRG is to reprogram if you do a firmware update.
I'm getting 0% HW errors on BFGminer 3.0.99, What version are you using?
November 02, 2013, 10:01:01 PM
yay i got mine in today getting about 67% hardware errors linux bfgminer
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
and cgminer for linux don't detect them =(
does anyone know what the little two buttons do on the bottom of the fury's?
November 02, 2013, 09:17:29 PM
Well, I was supposed to receive them today, looks like USPS will add salt to the wound....
Me too.The news said that the nut job at LAX delayed flights into southern cal. I suspect that is why tracking mine last sees it leaving Il.
November 02, 2013, 08:31:36 PM
If you want salt, live in the UK. They only shipped 50 of over 500 in the group buy and even they haven't arrived yet.
November 02, 2013, 08:22:48 PM
Well, I was supposed to receive them today, looks like USPS will add salt to the wound....
November 02, 2013, 05:57:18 PM
FWIW, I purchased 3 units and received them in the mail today.
I have them running temporarily on a windows 7 box and I am getting about 2.22 - 2.34 Ghps (per unit) with bfgminer 3.2.0. Going to move them to the Linux box at some point . . .
I have them running temporarily on a windows 7 box and I am getting about 2.22 - 2.34 Ghps (per unit) with bfgminer 3.2.0. Going to move them to the Linux box at some point . . .
November 02, 2013, 04:46:46 PM
I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install. 
The access denied issue was because the default driver folder from the linked download was set to encrypted. Changing that in the properties allowed me to install the drivers and get these running with the supplied bfgminer. I am getting 2.3GH/s per device.
November 02, 2013, 03:57:22 PM
@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).
Tried to find that thread. Could you link to it, please? Could also be a good idea to add a link to it from OP.
https://bitcointalksearch.org/topic/blue-fury-support-thread-319419
November 02, 2013, 03:46:20 PM
@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).
Tried to find that thread. Could you link to it, please? Could also be a good idea to add a link to it from OP.
November 02, 2013, 03:00:46 PM
I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.
Have you tried running them on a separate PC?
No. Why would they need a different PC to run? Seems I'm not the only one having these issues... Seriously doubt my PC is the problem.
I ended up running my Red Fury on a Ubuntu VM because my main PC had the same trouble with drivers not installing correctly.
November 02, 2013, 02:47:40 PM
@ssinc, received my order today thanks!
@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).
@Beastlymac, I am noticing some low rates, I will keep all my support issues in the support thread you opened up (as I feel most people should, as that's what it's there for).
November 02, 2013, 02:18:43 PM
I take it I didn't make the first batch, as I didn't get a tracking number in the last two days, and there was no postman on my doorstep today. 
When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...
When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...
Batch #2 will be here Monday as long as DHL is on time
I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.
Have you tried running them on a separate PC?
November 02, 2013, 02:12:25 PM
I can't get cgminer to detect these with the zadig drivers and the default drivers won't install for me to try bfgminer due to them saying access denied when trying to install.
November 02, 2013, 01:55:59 PM
I take it I didn't make the first batch, as I didn't get a tracking number in the last two days, and there was no postman on my doorstep today.
When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...
When will the units from batch 2 be sent out? Hope someone will be able to collect it and it will not be sent back...
November 02, 2013, 10:18:33 AM
I am currently doing some testing. Running it on Ubuntu on a vm. I am getting 50-100mhs more on our version if bfgminer. The usbs are hashing at a speed of 2.5-2.8 for me. I would highly recommend Ubuntu virtual machine until we can get windows problems fixed.
Which version of BFGminer are you running in Ubuntu on your VM?
November 02, 2013, 04:34:11 AM
I run Block erupters and a Red fury on one machine. Compiled cgminer without bitfury support and bfgminer with only bitfury support and I run both on the same computer.
I now run both my BE's and single BlueFury on the same Win7 64 machine with 2 separate instances of bfgminer (3.2.1 for the BE's with the -s erupter: all in the short-cut's target command line and 3.2.0 with bfgminer.exe -S "BF1:all" -o ... in a batch file (as per Beastlymac's mining support thread)). I'm getting the same performance as when I ran them on 2 separate PC's. The BE instance is turned on first, then the BF. There is a brief message when the 2nd one starts, but the BF device is detected consistently. Jump to: