Pages:
Author

Topic: [CLOSED] 0.9 OR LESS ~ BPMC "BLUE FURY" 2.7 GH/s USB MINER! SSINC GB#9! - page 3. (Read 56363 times)

hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    
For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller
I am running a single BF, on Win7 per the instructions in https://bitcointalksearch.org/topic/blue-fury-support-thread-319419.  With bfgminer ver 3.2.0 and the recommended batch file (bfgminer.exe -S "BF1:all" -o ...) it runs without H errors, but with the same lower hash rate that you are getting (about 2.26 GH/sec).... Huh


I am currently doing some testing. Running it on Ubuntu on a vm. I am getting 50-100mhs more on our version if bfgminer. The usbs are hashing at a speed of 2.5-2.8 for me. I would highly recommend Ubuntu virtual machine until we can get windows problems fixed.
hero member
Activity: 616
Merit: 500
Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    
For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller
I am running a single BF, on Win7 per the instructions in https://bitcointalksearch.org/topic/blue-fury-support-thread-319419.  With bfgminer ver 3.2.0 and the recommended batch file (bfgminer.exe -S "BF1:all" -o ...) it runs without H errors, but with the same lower hash rate that you are getting (about 2.26 GH/sec).... Huh

sr. member
Activity: 364
Merit: 250
Hash for Cash!
SSinc :

I PM'd you about my order (yesterday) -- I haven't seen tracking info though...can you check when you get a moment, thanks!



Sorry about that! PM'd you back! Smiley Your order ships with Batch #2 that should be arriving on Monday.
newbie
Activity: 16
Merit: 0
SSinc :

I PM'd you about my order (yesterday) -- I haven't seen tracking info though...can you check when you get a moment, thanks!

newbie
Activity: 21
Merit: 0
Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    
For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.

switched to your specific  Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

I'm running only two of them in a D-Link Hi-Speed USB 2.0 7-Port Powered Hub (DUB-H7) and 1 raspberry Pi as controller
newbie
Activity: 54
Merit: 0
What are the switches needed for cgminer?

I know of bigpic:all for bfgminer





I think it is bf1

What version of cg miner is required?
hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
What are the switches needed for cgminer?

I know of bigpic:all for bfgminer





I think it is bf1
newbie
Activity: 21
Merit: 0
What are the switches needed for cgminer?

I know of bigpic:all for bfgminer




hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    
For now I would recommend everyone use cgminer or our version of bfgminer 3.0.99 until we fix it. I have been communicating with Luke and we are working out the issues.
newbie
Activity: 21
Merit: 0
Received mine today they are hashing but with horrible error rates 58%+ and only hashing at 2.3GH

Miner Version
    bfgminer3.4.0

Devices
Name    ID    Temp    MH/s    Accept    Reject    Error    Utility    Last Share
BPM    0    N/A    2313.506    93    0 [0%]    387 [59.36%]    11.093    20:24:44
BPM    1    N/A    2218.942    93    0 [0%]    446 [62.91%]    11.093    20:24:48
Totals    2       4532.448    186    0 [0%]    833 [61.13%]    22.186    
sr. member
Activity: 252
Merit: 250
Received my tracking order, looking forward to getting these hashing! Thanks SSINC.
sr. member
Activity: 364
Merit: 250
Hash for Cash!
Hey ssinc, got my tracking number, set for delivery tomorrow. woo hooo!!

just waiting on my refund now....thanks a million satoshis!

You're welcome! And sent! Smiley

Trick or Treat!  Cheesy

Batch #1 is arriving TODAY! Grin

Everyone that ordered on or before 9/22 should have their order shipped today and will be receiving an e-mail with tracking and refund amount.

Everyone else will ship in Batch #2 which either has shipped yesterday or is shipping today ( Still waiting for that tracking number Beastlymac! Cry )


You get that Batch #2 tracking number yet? Smiley  Chomping at the bit (pardon the pun) to get me some Fury!

Tracking received Smiley
full member
Activity: 142
Merit: 100
Trick or Treat!  Cheesy

Batch #1 is arriving TODAY! Grin

Everyone that ordered on or before 9/22 should have their order shipped today and will be receiving an e-mail with tracking and refund amount.

Everyone else will ship in Batch #2 which either has shipped yesterday or is shipping today ( Still waiting for that tracking number Beastlymac! Cry )


You get that Batch #2 tracking number yet? Smiley  Chomping at the bit (pardon the pun) to get me some Fury!
sr. member
Activity: 336
Merit: 250
Hey ssinc, got my tracking number, set for delivery tomorrow. woo hooo!!

just waiting on my refund now....thanks a million satoshis!
hero member
Activity: 630
Merit: 501
Miner Setup And Reviews. WASP Rep.
I canceled my order a while back due to the delay.  I wanted to sell them to my bitminter clients . I had sold about sticks of am on ebay many people wanted to use these as the upgrade to am sticks.  

So,

 1: when is the next batch?

Should be announced soon

2:   plug n play for bitminter java client?

DrHaribo is currently working on it he has a dev unit already


3:  separate pc's  one for  am sticks one for fury sticks??

From my testing they hot plug fine and hash together on cgminer. We are working to,iro out some kinks with bfgminer.


legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
I canceled my order a while back due to the delay.  I wanted to sell them to my bitminter clients . I had sold about sticks of am on ebay many people wanted to use these as the upgrade to am sticks. 

So,

 1: when is the next batch?

2:   plug n play for bitminter java client?

3:  separate pc's  one for  am sticks one for fury sticks??
sr. member
Activity: 409
Merit: 251
Crypt'n Since 2011
I run Block erupters and a Red fury on one machine. Compiled cgminer without bitfury support and bfgminer with only bitfury support and I run both on the same computer.
hero member
Activity: 2576
Merit: 883
Freebitco.in Support https://bit.ly/2I9BVS2
That would be inconvenient, given I have about 70 BES on each machine running them. I'll just plan to deploy BlueFuries on a third machine....

I asked Luke-jr and he replied here:
https://bitcointalksearch.org/topic/m.3450533
Cryptic as ever. Smiley

I think he was saying what I was trying to. The "all" statement make it probe all COM ports and it won't work with both types of miner. If you run them on the same machine then you will have to specify the COM ports in each instance so it doesn't probe.

So yes with 70 BES that would take some time to setup.  Sad


legendary
Activity: 1680
Merit: 1014
Checked my e-mail and spam folder this morning: no tracking number for me.  Cry

So there'll be no delivery this Saturday. This starts to look like a 50% chance that I threw BTC5.88 out of the window.

I can have the following outcomes:
- Someone in the family will collect them. If it's not possible without my ID, then they'll eventually be returned to sender.
- If they are successfully collected, that someone in the family will plug them into the prepared USB ports. Then I'll remote to the machine at a later point and will try to launch them. If all goes well without my physical presence, then they'll be hashing, if not, they'll be sitting around doing nothing for a couple of months...

I know, it was stupid of me to actually expect that this time it would be different and ASICs would be manufactured on time and I would have the units in the first week of October...  Sad


Hmm. I plan to run two separate instances of bfgminer, where one instance would only control/probe for Erupters (-S erupter:all), and the other - only BFs (-S bigpic:all).  Hope this works. If not, I'd need to plan for all BlueFuries running from a separate machine.  Huh

I think you should be able to run them on the same machine by specifying the serial port number (for com3 it would be -S //./COM3 on cgminer I haven't used bfg but guess it can also work without probing).

That would be inconvenient, given I have about 70 BES on each machine running them. I'll just plan to deploy BlueFuries on a third machine....

I asked Luke-jr and he replied here:
https://bitcointalksearch.org/topic/m.3450533
Cryptic as ever. Smiley
sr. member
Activity: 364
Merit: 250
Hash for Cash!
Received 135 Blue Fury units at 4:00pm today and had them packed and at the post office before 5:30pm!

If you didn't receive an e-mail with tracking yet your order will be shipping in Batch #2

Here's a few photos I took while packing:



Pages:
Jump to: