[CLOSED] NanoFury NF1 USB stick - Group Buy + Product Assembly - page 12.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: Luke-Jr on October 07, 2013, 05:28:12 PM

Quote from: vs3 on September 28, 2013, 03:02:37 PM

Out of the 3 or 4 that I'll be putting together some will be going to the various miner software developers (e.g. one will be going to Luke-Jr so that he can start integrating support into his bfgminer, etc).

FWIW, I can confirm receipt of this. I plan to include NanoFury support in BFGMiner 3.4 at the latest.

Code:

woo. let us hear what hash rate you get out of it luke ^_^

also are these gunna be software overclockable with a bfgminer arg like --bitfury-osc6-bits NN

Luke-Jr

legendary

Activity: 2576

Merit: 1186

Quote from: vs3 on September 28, 2013, 03:02:37 PM

Out of the 3 or 4 that I'll be putting together some will be going to the various miner software developers (e.g. one will be going to Luke-Jr so that he can start integrating support into his bfgminer, etc).

FWIW, I can confirm receipt of this. I plan to include NanoFury support in BFGMiner 3.4 at the latest.

baros008

member

Activity: 78

Merit: 10

Thanks

vs3

hero member

Activity: 622

Merit: 500

Here are the PCB dimensions and heatsink holes positions. Please note that holes would likely end up being a 0.1mm smaller (as they'll be metalized).

vs3

hero member

Activity: 622

Merit: 500

UPDATE OCT/7 : We've now ordered all NanoFury NF1 devices for manufacturing. Everyone that placed an order has been sent an email with instructions for the second payment (which was also due to bitcointalk being down for several days). If you placed an order and did not get one with those instructions please send an email and PM to vs3 just in case and we'll get back to you

vs3

hero member

Activity: 622

Merit: 500

As announced in the opening post:

Quote from: vs3 on September 10, 2013, 03:23:18 AM

PREORDER IS NOW CLOSED

UPDATE OCT/2 : We'll be announcing the final price at some point tomorrow (while we confirm actual component prices today and tomorrow).
As announced on Oct/1 we can still accommodate a few more orders but they will not influence the price anymore. Cut-off date for any additional last-minute orders is Oct/6.

vs3

hero member

Activity: 622

Merit: 500

Quote from: baros008 on October 02, 2013, 06:03:25 AM

Quote from: vs3 on September 10, 2013, 03:23:28 AM

......

Acknowledgments and other information:

* This project was inspired to a great extent by BKKCoin's Klondike K1 Nano Open Source Board and we're grateful for all his work and we'll continue to support his project down the road as we can!

* We've reused the same physical dimensions (including heatsink holes size and position) with the goal that if necessary we may share the same plastic hosing and/or heatsink. We are also planning to release this project as Open Source as well.

I ordered NF1s from marto74 because I am from EU and I would like to prepare heatsinks in advance. I can't find drawing of K1 Nano and I don't know if version 05 still reuses same physical dimensions.

So can you share drawing with physical dimensions of NF1?

Baros - I'll post that a bit later today.

OtaconEmmerich

full member

Activity: 235

Merit: 100

I think I'm gunna wait for a final pricing before I even think about ordering even at BTC0.4 there's a very thin chance to get ROI if any at all. It would be different if it didn't take so long to get units in-hand.

baros008

member

Activity: 78

Merit: 10

Quote from: vs3 on September 10, 2013, 03:23:28 AM

......

Acknowledgments and other information:

* This project was inspired to a great extent by BKKCoin's Klondike K1 Nano Open Source Board and we're grateful for all his work and we'll continue to support his project down the road as we can!

* We've reused the same physical dimensions (including heatsink holes size and position) with the goal that if necessary we may share the same plastic hosing and/or heatsink. We are also planning to release this project as Open Source as well.

I ordered NF1s from marto74 because I am from EU and I would like to prepare heatsinks in advance. I can't find drawing of K1 Nano and I don't know if version 05 still reuses same physical dimensions.

So can you share drawing with physical dimensions of NF1?

vs3

hero member

Activity: 622

Merit: 500

Quote from: OleOle on October 01, 2013, 11:36:20 PM

Any chance we could get another status update please? Maybe put it in a larger font or perhaps use another colour in case we miss it?

Thanks in advance Cheesy

-----

I'll keep it in mind for the next update

OleOle

hero member

Activity: 532

Merit: 500

Are you like these guys?

Any chance we could get another status update please? Maybe put it in a larger font or perhaps use another colour in case we miss it?

Thanks in advance Cheesy

-----

Heard near the water cooler:

"Did you hear about those guys making the new usb Fury devices in the United States?"
"No, I haven't heard. Are those the same devices that some people are calling Red Fury or Blue Fury?"
"I don't know, all I know is that some people prefer to wait a while and buy unseen devices rather than buy similar units that are fully operational."
"Really? Why the hell would they do that?"
"I have absolutely no idea."

-----

Reference: https://bitcointalksearch.org/topic/closed-blue-fury-usb-miner-090-or-less-per-unit-dabs-philippinesasia-296953

vs3

hero member

Activity: 622

Merit: 500

In the mean time we got several requests for people to jump in the last second and place their order before the end of the week. Below is the update from the opening post in that regard:

Quote from: vs3 on September 10, 2013, 03:23:18 AM

UPDATE OCT/1 : We might be able to accommodate a few extra orders before we've purchased all components.
Any orders received after the final price has been announced will be required to prepay them in full.
We'll be ordering all components and services on Oct/6 and there will be no exceptions after that's happened!

vs3

hero member

Activity: 622

Merit: 500

PREORDER CLOSING TIME WILL BE 10:00 AM PACIFIC TIME ON OCT-2 (17:00 UTC)

UPDATE OCT/1 : We might be able to accommodate a few extra orders before we've purchased all components.
Any orders received after the final price has been announced will be required to prepay them in full.
We'll be ordering all components and services on Oct/6 and there will be no exceptions after that's happened!

Orders placed after that will be automatically cancelled!

Edit: Updated to match opening post (regarding last-minute orders)

vs3

hero member

Activity: 622

Merit: 500

Quote from: nemercry on October 01, 2013, 06:52:46 PM

Quote from: vs3 on October 01, 2013, 06:45:08 PM

AAAAaaaaand it seems Slush likes our device!!! :-)

http://i.imgur.com/ETzxinH.png

cgminer seems happy too:
http://i.imgur.com/DhwGucc.png

I'll be posting some more pictures and stuff a bit later!

Nice.
Could you do a testrun at higher speeds. Lets say longterm run aroung 2.1 - 2.3 GH/s?

Definitely. We'll be doing a lot of testing over the next few days and will certainly post more results and statistics.

vs3

hero member

Activity: 622

Merit: 500

Quote from: rampantparanoia on October 01, 2013, 06:48:48 PM

vs3, how long did you run that device to get 51 shares?

Probably about 30 seconds... I was so excited when I saw the result that I took the screenshot right away

nemercry

sr. member

Activity: 339

Merit: 250

Vice versa is not a meal.

Quote from: vs3 on October 01, 2013, 06:45:08 PM

AAAAaaaaand it seems Slush likes our device!!! :-)

cgminer seems happy too:

I'll be posting some more pictures and stuff a bit later!

Nice.
Could you do a testrun at higher speeds. Lets say longterm run aroung 2.1 - 2.3 GH/s?

rampantparanoia

sr. member

Activity: 516

Merit: 283

vs3, how long did you run that device to get 51 shares?

vs3

hero member

Activity: 622

Merit: 500

AAAAaaaaand it seems Slush likes our device!!! :-)

cgminer seems happy too:

I'll be posting some more pictures and stuff a bit later!

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: bitterdog on September 30, 2013, 11:12:50 AM

Quote from: bigbeninlondon on September 30, 2013, 09:13:26 AM

Quote from: bitterdog on September 29, 2013, 09:45:51 PM

This was the last straw for me to not even consider these guys. Stack this on top of no video, no proof of work.. nothing.... don't waste your time
Might as well call it VaporFury1
If you are going to have a pre-order, SHOW US WHAT WE ARE ORDERING!

There's always got to be at least one. Notice the username too. Fitting.

Always one what there chief? One who questions the word? I don't drink the koolaid without finding out what's in it. So far we saw a screwed up motherboard.. then the op states he soldere the usb connector on wrong.. very reassuring and comforting knowing this stuff isn't it?.. Just a little hint... if you fuck something up like that.. don't tell the people you are wanting to invest in you and your project so you don't look amature.

If you are not participating what are you doing here?

bigbeninlondon

hero member

Activity: 742

Merit: 500

Quote from: bitterdog on September 30, 2013, 11:12:50 AM

Quote from: bigbeninlondon on September 30, 2013, 09:13:26 AM

Quote from: bitterdog on September 29, 2013, 09:45:51 PM

This was the last straw for me to not even consider these guys. Stack this on top of no video, no proof of work.. nothing.... don't waste your time
Might as well call it VaporFury1
If you are going to have a pre-order, SHOW US WHAT WE ARE ORDERING!

There's always got to be at least one. Notice the username too. Fitting.

Always one what there chief? One who questions the word? I don't drink the koolaid without finding out what's in it. So far we saw a screwed up motherboard.. then the op states he soldere the usb connector on wrong.. very reassuring and comforting knowing this stuff isn't it?.. Just a little hint... if you fuck something up like that.. don't tell the people you are wanting to invest in you and your project so you don't look amature.

You called it vaporware. Now that there is evidence of progress, suddenly it's not "vaporware" but "amateur hour". You said "Show us what we are buying!" and then when they did, you criticized that. If you don't like what you see, then move on.

Topic: [CLOSED] NanoFury NF1 USB stick - Group Buy + Product Assembly - page 12. (Read 74311 times)