Topic: [CLOSED]***Spondoolies Tech SP10 - 1.4-1.45Th/s - $2,795 + shipping*** - page 4. (Read 32349 times)

Quote from: bobsag3 on May 28, 2014, 09:29:18 PM

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

Will you get better speed with lower temperatures though?

What are good values for temp front/temp back?

I moved them to side now - but I screwed up and I have the bottom of each SP10 pointing to the other with a distance of about 15 cm. So all heat from bottom stays trapped.
Currently: 33/86 and 42/87 (speed 1.35 for both)

Intake of 20C is ideal
The rating is 1.4 +- 10%, there are some production variants
Follow the overclocking instruction in the technical blog

Just wanting to confirm values before going to overclocking so that I don't damage the miners.
on Turbo mode some ASIC's DCt is >90 (some cases 100).
Also sometimes I see temperature hitting 119C. Is that normal?

100:113c 525hz( 0/ 0) 7fff 61|101:113c 495hz( 0/ 0 ) 7fff 70 | 102:113c 375hz( 0/ 8 ) 7fff 48|103:119c 225hz(14/19) 7fff 47

Should I overclock then?

One miner has DC2DC DCR inductor flag loop (0-11) =2 while (12-23)=0
The other has (0-23) = 0
What does that mean?

It's OK. The ASICs hit 119 but they should find optimal spot at 113. It is not optimal temperature, but you can try to over-clock. We have not seen problems with over-clocking so far. DCR types are different inductors on the DC2DC in the miners. If someone does damage to the miner I will post here and in blog and we will stop with it

jonnybravo0311

legendary

Activity: 1344

Merit: 1024

Mine at Jonny's Pool

My experience with this group buy:

5/20 ordered, paid by wire transfer
5/22 wire transfer cleared
5/22 SP-10 shipped
5/28 SP-10 arrived

8 days total from start to finish including 2 days of waiting for payment to clear, a long weekend holiday in the US and a customs delay until I filled out an importer form.

By the way, FedEx contacted me on the holiday and I was able to fill out and email everything they needed while I was sitting in the Delta SkyClub rooftop lounge at JFK waiting for my flight to Tokyo.

Absolutely fantastic experience all across the board. Thank you to RoadStress and Spondoolies-Tech.

gurki

member

Activity: 102

Merit: 10

Quote from: DimensionsOfHell on May 28, 2014, 09:21:07 PM

Hey SP-Tech, you've got two customers already for SP20, lets get the ball rolling :-)

3*

+4

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: DimensionsOfHell on May 28, 2014, 09:21:07 PM

Hey SP-Tech, you've got two customers already for SP20, lets get the ball rolling :-)

3*

DimensionsOfHell

full member

Activity: 346

Merit: 100

Hey SP-Tech, you've got two customers already for SP20, lets get the ball rolling :-)

Onicoman

member

Activity: 70

Merit: 10

Quote from: DimensionsOfHell on May 28, 2014, 02:17:34 PM

Hey SP-tech, quick question:

I know you have SP10, and are working on SP30 (I'm waiting on another good GB to buy 2 [Hint:Hint RoadStress]) , but whatever happened to SP20? Can we get some SP20's with 3TH with a good price? Grin

Would be very interested in a sp20 myself. Also props to spoondolies. Have read so manny positive reviews on the hw Grin

canford

member

Activity: 89

Merit: 10

Quote from: murdof on May 28, 2014, 01:54:49 PM

Quote from: Guy Corem on May 28, 2014, 01:49:02 PM

Quote from: Guy Corem on May 28, 2014, 01:49:02 PM

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

Will you get better speed with lower temperatures though?

What are good values for temp front/temp back?

I moved them to side now - but I screwed up and I have the bottom of each SP10 pointing to the other with a distance of about 15 cm. So all heat from bottom stays trapped.
Currently: 33/86 and 42/87 (speed 1.35 for both)

Intake of 20C is ideal
The rating is 1.4 +- 10%, there are some production variants
Follow the overclocking instruction in the technical blog

Just wanting to confirm values before going to overclocking so that I don't damage the miners.
on Turbo mode some ASIC's DCt is >90 (some cases 100).
Also sometimes I see temperature hitting 119C. Is that normal?

100:113c 525hz( 0/ 0) 7fff 61|101:113c 495hz( 0/ 0 ) 7fff 70 | 102:113c 375hz( 0/ 8 ) 7fff 48|103:119c 225hz(14/19) 7fff 47

Should I overclock then?

One miner has DC2DC DCR inductor flag loop (0-11) =2 while (12-23)=0
The other has (0-23) = 0
What does that mean?

I am seeing DCR 01-11 = 2 and DCR 12-23 = 0 on all three of my SP10s. What does this mean? Thanks Spondoolies.

DimensionsOfHell

full member

Activity: 346

Merit: 100

Hey SP-tech, quick question:

I know you have SP10, and are working on SP30 (I'm waiting on another good GB to buy 2 [Hint:Hint RoadStress]) , but whatever happened to SP20? Can we get some SP20's with 3TH with a good price? Grin

murdof

full member

Activity: 196

Merit: 100

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

Will you get better speed with lower temperatures though?

What are good values for temp front/temp back?

I moved them to side now - but I screwed up and I have the bottom of each SP10 pointing to the other with a distance of about 15 cm. So all heat from bottom stays trapped.
Currently: 33/86 and 42/87 (speed 1.35 for both)

Intake of 20C is ideal
The rating is 1.4 +- 10%, there are some production variants
Follow the overclocking instruction in the technical blog

Just wanting to confirm values before going to overclocking so that I don't damage the miners.
on Turbo mode some ASIC's DCt is >90 (some cases 100).
Also sometimes I see temperature hitting 119C. Is that normal?

100:113c 525hz( 0/ 0) 7fff 61|101:113c 495hz( 0/ 0 ) 7fff 70 | 102:113c 375hz( 0/ 8 ) 7fff 48|103:119c 225hz(14/19) 7fff 47

Should I overclock then?

One miner has DC2DC DCR inductor flag loop (0-11) =2 while (12-23)=0
The other has (0-23) = 0
What does that mean?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

Will you get better speed with lower temperatures though?

What are good values for temp front/temp back?

I moved them to side now - but I screwed up and I have the bottom of each SP10 pointing to the other with a distance of about 15 cm. So all heat from bottom stays trapped.
Currently: 33/86 and 42/87 (speed 1.35 for both)

Intake of 20C is ideal
The rating is 1.4 +- 10%, there are some production variants
Follow the overclocking instruction in the technical blog

murdof

full member

Activity: 196

Merit: 100

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

Will you get better speed with lower temperatures though?

What are good values for temp front/temp back?

I moved them to side now - but I screwed up and I have the bottom of each SP10 pointing to the other with a distance of about 15 cm. So all heat from bottom stays trapped.
Currently: 33/86 and 42/87 (speed 1.35 for both)

raskul

sr. member

Activity: 434

Merit: 250

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

my SP10's are stacked, no problems - i'm using the shelves from this between them:

http://www.argos.co.uk/static/Product/partNumber/8754860.htm

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

I have two SP10.

One reports temp front/back: 30/79 C - mines @ 1.44THs
The other reports temp front/back: 35/80 C - mines @ 1.39THs

what's the best way to stack them?
Currently I have one on top of the other.

I think someone had said put them on the side?

The bottoms get really hot, I wouldn't stack them unless there was an air gap in-between at least.

There is absolute no problem in stacking them.
No need to put them on the side.

wpgdeez

hero member

Activity: 728

Merit: 500