[CLOSING DOWN] ScryptGuild Auto-Switching Pool - page 22.

eleuthria

legendary

Activity: 1750

Merit: 1007

Quote from: casinocoin on April 29, 2014, 10:38:39 AM

Hey eleuthria, we are having some major problems with our chain due to multipool hop and KGW Bug that has yet been fixed in our code.
Is there any way to halt casinocoin mining on scryptguild. If you view the chain you will see the problems.
http://altexplorer.net/chain/CasinoCoin

Or seeing as it will be removed eventually can you do so now?

I've applied a penalty to CSC for the time being so the pool will not touch it as frequently.

eleuthria

legendary

Activity: 1750

Merit: 1007

Quote from: mocap3069 on April 30, 2014, 11:58:34 AM

Anyone else having payout issues?
The payout amount does not work
all the time even though it is above
the minimum limit.

What coin and what payout threshold did you set? Payouts have been functioning properly. 0.01+ thresholds payout hourly. 0.00x thresholds payout once per day. Alternatively: Make sure you actually confirmed your wallet addresses.

mocap3069

newbie

Activity: 7

Merit: 0

Anyone else having payout issues?
The payout amount does not work
all the time even though it is above
the minimum limit.

casinocoin

legendary

Activity: 849

Merit: 1050

CasinoCoin

Quote from: w5pn73 on April 30, 2014, 03:18:11 AM

Quote from: casinocoin on April 29, 2014, 10:38:39 AM

Hey eleuthria, we are having some major problems with our chain due to multipool hop and KGW Bug that has yet been fixed in our code.

Is for that reason that CSC are not converting ?

Exact reason, BlockChain will freeze when there is a jump from 0.3 - 8 in a matter of 1 block.

guytechie

hero member

Activity: 677

Merit: 500

Whoa, look at the huge bump in hashrate!

w5pn73

sr. member

Activity: 635

Merit: 251

Quote from: casinocoin on April 29, 2014, 10:38:39 AM

Hey eleuthria, we are having some major problems with our chain due to multipool hop and KGW Bug that has yet been fixed in our code.

Is for that reason that CSC are not converting ?

casinocoin

legendary

Activity: 849

Merit: 1050

CasinoCoin

Hey eleuthria, we are having some major problems with our chain due to multipool hop and KGW Bug that has yet been fixed in our code.
Is there any way to halt casinocoin mining on scryptguild. If you view the chain you will see the problems.
http://altexplorer.net/chain/CasinoCoin

Or seeing as it will be removed eventually can you do so now?

eleuthria

legendary

Activity: 1750

Merit: 1007

The hardware has already been ordered and is being shipped to the BTC Guild colo, hopefully arriving by May 5th. The goal is that BTC Guild's scrypt mining will be enabled on May 9th. When that happens, there will be a notice on the ScryptGuild website advising users to move to BTC Guild, though the site will remain online for ~6 weeks.

May 10th - ScryptGuild will continue to operate normally, BTC Guild will begin doing DOGE and LTC mining (with switching between the two available). Registrations disabled on ScryptGuild. 2% fee added.
May 15th - Auto convert disabled on ScryptGuild. Automatic mining disabled on all coins except LTC+DOGE. ScryptGuild fee increased to 10% to get people to move to the proper servers (BTC Guild).
May 20th - ScryptGuild pool server closed.
June 10th - ScryptGuild closed.

The exact dates may be moved, but that's the rough timeline.

BrandonMcPherson

full member

Activity: 205

Merit: 100

dimfot, Eleuthria has mentioned that he wants to start the move in mid-May. The list of coins will be pared to Doge and LTC.

dimfot

sr. member

Activity: 275

Merit: 250

when is the merge with btc guild is going to happen? are you still going to use same coin list?

eleuthria

legendary

Activity: 1750

Merit: 1007

Quote from: w5pn73 on April 27, 2014, 02:27:40 AM

What I don't understand is why it switches to LTC now with 1/3 less hash power and was not before, and only since few days, so something is changed.

Either the value of LTC mining went up (diff/price ratio), or the value of all the other alt coins went down to the point the penalty on LTC still makes it worth mining. DOGE difficulty is very spiky because of their terrible implementation of a faster adjusting difficulty as a response to multipools. We generally fell back to WDC and/or ANC (and other random coins in between) whenever DOGE difficulty spiked.

Quote from: w5pn73 on April 27, 2014, 02:27:40 AM

I think it still doesn't work, I don't have much LTCs but, if my calculations are not wrong, should be enough to trigger the per-hour conversion.

The exchange has been refilled again, but my guess is you have a reserve set on LTC, or actually don't have enough to warrant an hourly auto conversion (or have it disabled). Earlier today an auto convert for > 100 LTC was run. The auto convert will only run if it can clear all applicable user balances in a single run.

w5pn73

sr. member

Activity: 635

Merit: 251

Quote from: daddyfatsax on April 26, 2014, 12:53:07 PM

I would be fine with going to switching between just LTC and Doge, like what will eventually happen.

I could agree if the pool has enough hash power to find at least one block at hour, but looking at the statistics, one block a day or less (the 25 was an extremely lucky day with 3 blocks) means that most of the power used to find LTC is wasted. Hopefully when the BTC Guild merge is done the situation will change.

What I don't understand is why it switches to LTC now with 1/3 less hash power and was not before, and only since few days, so something is changed.

Quote from: eleuthria on April 26, 2014, 03:42:08 PM

LTC auto convert should kick in next hour. I was not expecting the pool to hit multiple LTC blocks so the balance on BTC-e was not topped up.

I think it still doesn't work, I don't have much LTCs but, if my calculations are not wrong, should be enough to trigger the per-hour conversion.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Thanks I appreciate it.

Quote from: eleuthria on April 26, 2014, 05:38:48 PM

Quote from: ManeBjorn on April 26, 2014, 04:44:10 PM

How do I withdraw a small amount to empty the wallet?
0.00141962 I need to withdraw that amount. When I set the auto withdrawl to .0001 it reverted to 0.
I am sure I am messing up some where. I could not find the manual withdraw button.

Set it to 0.001 (not 0.0001). 0.00x auto payout thresholds trigger once per 24 hours. 0.0x+ trigger once per hour. The full balance is paid when it triggers.

Quote from: Aureum_Coffee on April 26, 2014, 05:05:29 PM

Quote from: eleuthria on April 26, 2014, 03:42:08 PM

LTC auto convert should kick in next hour. I was not expecting the pool to hit multiple LTC blocks so the balance on BTC-e was not topped up.

Is this causing these errors I am seeing?

2014-04-26 20:43:23] Starting Stratum on stratum+tcp://stratum.scryptguild.com:3333
[2014-04-26 20:43:23] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-04-26 20:43:23] 0: Open UART device /dev/ttyACM1
0: >>> LTC : 55aac000808080800000000001000000
0: >>> LTC : 55aac000c0c0c0c00500000001000000
0: >>> LTC : 55aaef020000000000000000000000000000000000000000
0: >>> LTC : 55aaef3020000000
0: >>> LTC : 55aa1f2817000000
0: >>> LTC : 55aaef000500e083
[2014-04-26 20:43:23] 0: Set GC3355 core frequency to 800Mhz
[2014-04-26 20:43:24] stratum_recv_line failed
[2014-04-26 20:43:24] ...retry after 30 seconds

I have absolutely no idea what that is, but it's unrelated.

eleuthria

legendary

Activity: 1750

Merit: 1007

Quote from: ManeBjorn on April 26, 2014, 04:44:10 PM

How do I withdraw a small amount to empty the wallet?
0.00141962 I need to withdraw that amount. When I set the auto withdrawl to .0001 it reverted to 0.
I am sure I am messing up some where. I could not find the manual withdraw button.

Set it to 0.001 (not 0.0001). 0.00x auto payout thresholds trigger once per 24 hours. 0.0x+ trigger once per hour. The full balance is paid when it triggers.

Quote from: Aureum_Coffee on April 26, 2014, 05:05:29 PM

Quote from: eleuthria on April 26, 2014, 03:42:08 PM

LTC auto convert should kick in next hour. I was not expecting the pool to hit multiple LTC blocks so the balance on BTC-e was not topped up.

Is this causing these errors I am seeing?

2014-04-26 20:43:23] Starting Stratum on stratum+tcp://stratum.scryptguild.com:3333
[2014-04-26 20:43:23] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-04-26 20:43:23] 0: Open UART device /dev/ttyACM1
0: >>> LTC : 55aac000808080800000000001000000
0: >>> LTC : 55aac000c0c0c0c00500000001000000
0: >>> LTC : 55aaef020000000000000000000000000000000000000000
0: >>> LTC : 55aaef3020000000
0: >>> LTC : 55aa1f2817000000
0: >>> LTC : 55aaef000500e083
[2014-04-26 20:43:23] 0: Set GC3355 core frequency to 800Mhz
[2014-04-26 20:43:24] stratum_recv_line failed
[2014-04-26 20:43:24] ...retry after 30 seconds

I have absolutely no idea what that is, but it's unrelated.

Aureum_Coffee

full member

Activity: 130

Merit: 100

Quote from: eleuthria on April 26, 2014, 03:42:08 PM

LTC auto convert should kick in next hour. I was not expecting the pool to hit multiple LTC blocks so the balance on BTC-e was not topped up.

Is this causing these errors I am seeing?

2014-04-26 20:43:23] Starting Stratum on stratum+tcp://stratum.scryptguild.com:3333
[2014-04-26 20:43:23] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-04-26 20:43:23] 0: Open UART device /dev/ttyACM1
0: >>> LTC : 55aac000808080800000000001000000
0: >>> LTC : 55aac000c0c0c0c00500000001000000
0: >>> LTC : 55aaef020000000000000000000000000000000000000000
0: >>> LTC : 55aaef3020000000
0: >>> LTC : 55aa1f2817000000
0: >>> LTC : 55aaef000500e083
[2014-04-26 20:43:23] 0: Set GC3355 core frequency to 800Mhz
[2014-04-26 20:43:24] stratum_recv_line failed
[2014-04-26 20:43:24] ...retry after 30 seconds

ManeBjorn

legendary

Activity: 1288

Merit: 1004

How do I withdraw a small amount to empty the wallet?
0.00141962 I need to withdraw that amount. When I set the auto withdrawl to .0001 it reverted to 0.
I am sure I am messing up some where. I could not find the manual withdraw button.

eleuthria

legendary

Activity: 1750

Merit: 1007

LTC auto convert should kick in next hour. I was not expecting the pool to hit multiple LTC blocks so the balance on BTC-e was not topped up.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

I would be fine with going to switching between just LTC and Doge, like what will eventually happen.

guytechie

hero member

Activity: 677

Merit: 500

Quote from: w5pn73 on April 26, 2014, 09:34:53 AM

The pool started to mine LTC very frequenly, despite the hash rate was much lower than in the past when LTC was not mining at all, and it is a complete waste of time and resources since whole shifts doesn't get a single block, even when LTC is mined half the time.
I know you don't want to make enhancements to the pool, but please at least get rid of LTC or fix whatever limited LTC mining in the past.

It also doesn't look like it's auto-converting LTC either.

w5pn73

sr. member

Activity: 635

Merit: 251

The pool started to mine LTC very frequenly, despite the hash rate was much lower than in the past when LTC was not mining at all, and it is a complete waste of time and resources since whole shifts doesn't get a single block, even when LTC is mined half the time.
I know you don't want to make enhancements to the pool, but please at least get rid of LTC or fix whatever limited LTC mining in the past.

Topic: [CLOSING DOWN] ScryptGuild Auto-Switching Pool - page 22. (Read 102281 times)