CryptoDredge 0.8.0 — NVIDIA GPU Miner [obsolete] - page 10.

jugger1028

jr. member

Activity: 213

Merit: 3

Quote from: kamak on July 03, 2018, 03:30:40 PM

So as many people that use CD (CryptoDrgedge) are aware the dev fee is being mined on an algo, with a power curve, that is completely out of alignment with the PHI2 algo. This is causing pp rigs to crash, if they are not aware of what is happening and prepared to adjust their gpus, for it, This is an unacceptable practice by CD, in my opinion., as this prevents pp from adjusting for maximised PHI2 production, at lowest PL, due to having to or wishing to power limit their gpus for power conservation. Likewise, also limiting the use of -i Intensity, due to the Dev fee algo, causing over-driving of the gpu's. I am conducting a back to back comparison test with CD (CryptoDredge) Miner and ZE (Z-Enemy) miner, on identical rigs, for a one week period on Icemining.ca pool to determine luxcoin production. The fact that I can not use an intensity factor greater than the default CD set, is only proving that CD has limitation under this Dev fee algo practice.

There are reports that CD has a much higher power use output compared to the other miners as well, which would probably lead to more hashrate. Can you check that as well?

cryptodredge

member

Activity: 157

Merit: 19

Quote from: kamak on July 03, 2018, 03:30:40 PM

So as many people that use CD (CryptoDrgedge) are aware the dev fee is being mined on an algo, with a power curve, that is completely out of alignment with the PHI2 algo. This is causing pp rigs to crash, if they are not aware of what is happening and prepared to adjust their gpus, for it, This is an unacceptable practice by CD, in my opinion., as this prevents pp from adjusting for maximised PHI2 production, at lowest PL, due to having to or wishing to power limit their gpus for power conservation. Likewise, also limiting the use of -i Intensity, due to the Dev fee algo, causing over-driving of the gpu's. I am conducting a back to back comparison test with CD (CryptoDredge) Miner and ZE (Z-Enemy) miner, on identical rigs, for a one week period on Icemining.ca pool to determine luxcoin production. The fact that I can not use an intensity factor greater than the default CD set, is only proving that CD has limitation under this Dev fee algo practice.

The fix will be available in next release. Stay tuned.

kamak

newbie

Activity: 10

Merit: 0

So as many people that use CD (CryptoDrgedge) are aware the dev fee is being mined on an algo, with a power curve, that is completely out of alignment with the PHI2 algo. This is causing pp rigs to crash, if they are not aware of what is happening and prepared to adjust their gpus, for it, This is an unacceptable practice by CD, in my opinion., as this prevents pp from adjusting for maximised PHI2 production, at lowest PL, due to having to or wishing to power limit their gpus for power conservation. Likewise, also limiting the use of -i Intensity, due to the Dev fee algo, causing over-driving of the gpu's. I am conducting a back to back comparison test with CD (CryptoDredge) Miner and ZE (Z-Enemy) miner, on identical rigs, for a one week period on Icemining.ca pool to determine luxcoin production. The fact that I can not use an intensity factor greater than the default CD set, is only proving that CD has limitation under this Dev fee algo practice.

Mikanoshi

sr. member

Activity: 798

Merit: 252

Insane In The Blockchain ⚠

Instead of resetting power limit and crashing/burning🔥 users' rigs just make 2% devfee instead of 1% if you don't get enough.

Drifttap

newbie

Activity: 2

Merit: 0

Not sure why but I get slower results with 0.6.0. I also had to add --cpu-priority 5 to the command line in order for my miner to last a few seconds.
Ended up crashing on a 2 card pc and a 5 card 1080ti rig.
Reverted back to 0.5.1, have had to reduce clocks because of "dev fee crash" but i'm seeing the best results but also at a higher total power consumption.
Stable overclocks for 1080ti will range on any miner for ph2 go for -500 memory clock, then start at +50 core clock and slowly work your way up.

ztaz

member

Activity: 602

Merit: 11

Quote from: N0VESKE on July 03, 2018, 05:53:18 AM

CryptoDredge 0.6.0
It great and high-performance for my 1080Ti
phi2 LUX

this if it was stable and took off in 5 minutes after launch Angry

... and the developers responded to tickets ... ccminer 2.3 is stable in my rigs, this is not.

N0VESKE

newbie

Activity: 33

Merit: 0

CryptoDredge 0.6.0
It great and high-performance for my 1080Ti
phi2 LUX

Ogionion

newbie

Activity: 5

Merit: 0

Hello, could we connect CryptoDredge to Awesome Miner? who already connected help

Thanhtamtg

newbie

Activity: 16

Merit: 0

Quote from: oberrz on July 02, 2018, 05:32:40 AM

I have very specific overlocking with constant voltage and my PSU works on 80% of their power with my overlocking, when Dev's session starts it makes my PSU work on 100% and it crash everything. Why don't you just make dev's sessions in the same algorithm as users session ? It will resolve any issues.

p.s I'll try i 5 but I guess my suggestion will be much better

p.p.s : Same picture with -i 5 https://ibb.co/eac4rd and https://ibb.co/jBqqWd

Please make it finally fixed. Your miner is the best but this thing makes me using ccminer...

VOTE: just make dev's sessions in the same algorithm as users session

Juniormkl

newbie

Activity: 155

Merit: 0

The devfee is crashing my rigs, stable on ccminer and z-enemy miner, same settings on both. Fix it please.

rezarrected

newbie

Activity: 15

Merit: 0

Any plans to support Cryptonight7/Monero?

We'd love to use it for our project xDrop Crypto Messenger (DROP) https://xDrop.io

oberrz

newbie

Activity: 20

Merit: 0

I have very specific overlocking with constant voltage and my PSU works on 80% of their power with my overlocking, when Dev's session starts it makes my PSU work on 100% and it crash everything. Why don't you just make dev's sessions in the same algorithm as users session ? It will resolve any issues.

p.s I'll try i 5 but I guess my suggestion will be much better

p.p.s : Same picture with -i 5 https://ibb.co/eac4rd and https://ibb.co/jBqqWd

Please make it finally fixed. Your miner is the best but this thing makes me using ccminer...

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: cryptodredge on July 01, 2018, 04:31:17 PM

Please, try $Writer.Write("summary"), because WriteLine sending "summary\r\n". We'll fix it

Thanks. `.Write("summary")` fork fine.
I add CD in MindMiner.

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: joseph32 on July 02, 2018, 12:15:17 AM

I tried it to run with Nicehash Legacy, but the simple replacement of the ccminer will not work.

Does anyone knows the trick?

Use MindMiner Wink

https://github.com/Quake4/MindMiner/releases/tag/v2.50

nokia5556

newbie

Activity: 35

Merit: 0

Thank you dev for API support, https://minermonitoring.com now supports with API reporting.

Mr.Spider703

member

Activity: 392

Merit: 27

http://radio.r41.ru

my rig was restart on last version.
мoй пк пepeзaпycтилcя caм нa пocлeднeй вepcии

Thanhtamtg

newbie

Activity: 16

Merit: 0

Quote from: nitrobg on June 30, 2018, 03:46:44 AM

Why are you mining neoscrypt as devfee? My power draw increases by 50% while the devfee is running and the temperatures spike up. You'll kill someone's rig doing this.

My rig dead lastnight Sad