hello everyone.
If someone has newer firmware that 16-11-2018, can they share it here?
(or 11-16-2018 for the USA people)
i've found 30-11-2018, but while it boots the miner, it never finds the asics and therefore never mining.
for those that do have newer, but don't have a copy to share, you can use the same imageUSB writer to read a copy of your usb stick and make an image. (just save your json backup file first, then remove you user/pass details, save, read the image with ImageUSB, then reload you json file. don't want to know your personal details. thanks)
would be great if someone out there has something newer.
cheers.
also, would be good to have a backup for future users...
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner (Read 42524 times)
Hi guys, I know this it doesn't belong in here but I post it because it is related to Zig Z1 Pro.
Few months ago I hooked up a pair of cable splitter to the PSU for some extra 6pin connectors, this solved the melting problem on the adapter splitter.
I'm selling some extra new cables that I have, I don't recommend the adapter but if you need it, you can buy it.
Recommended
DC power Cable for ASIC’s PSU
Wire specification: 1007 18AWG 34*0.18 tinned copper
6 pin male x5 / 14-5 O type terminal
Length about: 40cm
$10 USD each including shipping
I have 2 unused.
Not recommended
GPU 6pin splitter
6pin female to 2 6pin+2pin male
Have 5 unused, $1 each
$1 for the shipping
https://www.dropbox.com/sh/yu9wdgnlav4px1s/AADYVk72XT1p51BAknq8Dgk1a?dl=0
Few months ago I hooked up a pair of cable splitter to the PSU for some extra 6pin connectors, this solved the melting problem on the adapter splitter.
I'm selling some extra new cables that I have, I don't recommend the adapter but if you need it, you can buy it.
Recommended
DC power Cable for ASIC’s PSU
Wire specification: 1007 18AWG 34*0.18 tinned copper
6 pin male x5 / 14-5 O type terminal
Length about: 40cm
$10 USD each including shipping
I have 2 unused.
Not recommended
GPU 6pin splitter
6pin female to 2 6pin+2pin male
Have 5 unused, $1 each
$1 for the shipping
https://www.dropbox.com/sh/yu9wdgnlav4px1s/AADYVk72XT1p51BAknq8Dgk1a?dl=0
Hi again , can you point me where can I help hash-board for ZIGZ+
Hi, can you point me where can I help hash-board for ZIGZ+
One hash-board died.
пpивeт! вcтyпaй в гpyппy Teлeгpaмм тaм мoжнo yзнaть! https://web.telegram.org/#/im?p=@Dayunzigz1One hash-board died.
OK, Cпacбo!
Hi, can you point me where can I help hash-board for ZIGZ+
One hash-board died.
пpивeт! вcтyпaй в гpyппy Teлeгpaмм тaм мoжнo yзнaть! https://web.telegram.org/#/im?p=@Dayunzigz1 One hash-board died.
Hi, can you point me where can I help hash-board for ZIGZ+
One hash-board died.
One hash-board died.
dayun zig z1 pro profit 3$ per day
this is big scam
monacoin network hasrate 100th
i think dayun relase new machine and they mine mona
this is big scam
monacoin network hasrate 100th
i think dayun relase new machine and they mine mona
Hello! Not so long ago, I had problems with 2 hash boards, on my ZIG Z1, can anyone have extra hash boards? =) I would be glad to accept them as a gift, I will pay for the delivery =) and I plan to remake Z1 in Z1PRO, I think there shouldn’t be anything complicated with the modernization work =) enter my telegram chat, there we discuss these ASICs! =)))
https://web.telegram.org/#/im?p=@Dayun_zig_z1
https://web.telegram.org/#/im?p=@Dayunzigz1
https://web.telegram.org/#/im?p=@Dayun_zig_z1
https://web.telegram.org/#/im?p=@Dayunzigz1
^ Ok. This is what I meant:
You said that there is only one possible fan for Z1 Pro,
and that argument is wrong.
You said that there is only one possible fan for Z1 Pro,
and that argument is wrong.
@maximry
Your argument is invalid.
That Sunon fan model I mentioned, actually has a slightly higher airflow than that Delta model.
It does not matter which brand cooling fan you use.
The specs (airflow, supply voltage, pwm control or not, etc. ) only matter.
Cooling fans are bulk stuff.
My arguments are absolutely valid for Delta. I wrote especially about Delta fans. The Delta company have the only one model with 140 mm and 12V features - PFM1412DEB7V . Z1Pro factory doesn't glue any stickers on their fans. That's why some people have this problem. Your argument is invalid.
That Sunon fan model I mentioned, actually has a slightly higher airflow than that Delta model.
It does not matter which brand cooling fan you use.
The specs (airflow, supply voltage, pwm control or not, etc. ) only matter.
Cooling fans are bulk stuff.
Anybody know of a smart plug that can be used with this asic for 240v? This way it can be turned on and off remotely.
I use these https://www.itead.cc/sonoff-pow-r2.htmlYou dont have to worry about voltage it works on 112 or 230V no problem and You have all king of measurments plus history of it from last 3 months, works on phone app
Tested on many machines - s17, m20s, s15. Never melted or burned, but i use good quality cables aswell.
@maximry
Your argument is invalid.
That Sunon fan model I mentioned, actually has a slightly higher airflow than that Delta model.
It does not matter which brand cooling fan you use.
The specs (airflow, supply voltage, pwm control or not, etc. ) only matter.
Cooling fans are bulk stuff.
Your argument is invalid.
That Sunon fan model I mentioned, actually has a slightly higher airflow than that Delta model.
It does not matter which brand cooling fan you use.
The specs (airflow, supply voltage, pwm control or not, etc. ) only matter.
Cooling fans are bulk stuff.
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
There is only one 140 mm and 12V Delta fan - PFM1412DEB7V . This is its datasheet - https://www.delta-fan.com/Download/Spec/PFM1412DEB7V.pdf
I thinks there is only one possible and good fan for Z1 Pro.
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
If it is a 120x38 mm fan:i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
Delta QFR1212GHE is a good replacement fan.
If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.
it seems another good suggestion, is it will have a trouble with fan if i using slot extension for additional fan in the other side ??
I think you may face problems with that kind of a setup taking too much current from the 4-pin fan connectors in the control board.
The extension slot adapter cable wires may also be too thin for the total amount of current in such setup.
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
If it is a 120x38 mm fan:i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
Delta QFR1212GHE is a good replacement fan.
If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.
it seems another good suggestion, is it will have a trouble with fan if i using slot extension for additional fan in the other side ??
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
If it is a 120x38 mm fan:i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
Delta QFR1212GHE is a good replacement fan.
If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.
Hi,
I can only mine on Nicehash. I tried Zergpool, Ahashpool and Zpool. But after a while hash goes to 0. Nonce submit on/off makes no difference. Any ideas?
Thank you in advance.
I can only mine on Nicehash. I tried Zergpool, Ahashpool and Zpool. But after a while hash goes to 0. Nonce submit on/off makes no difference. Any ideas?
Thank you in advance.
hello, have you tried to mine on vippool.com ? i guess it much more stable hashrate if you mine there
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
Someone is selling the fan for replace on online marketplace like amazon, try to find there
I've not had any trouble with the tp-link plug, I had it running some different miners for a few months with no issues. It's handy to be able to keep track of the power.
I can't seem to connect via ssh, I just get
connect to host 192.168.1.118 port 22: Connection refused
any advise? Can you set these back to default settings? All the firmware links seem to only be applicable to writing USB pens, and not to a micro sd card.
I can't seem to connect via ssh, I just get
connect to host 192.168.1.118 port 22: Connection refused
any advise? Can you set these back to default settings? All the firmware links seem to only be applicable to writing USB pens, and not to a micro sd card.
you should be use linux os bro
and enable ssh first
hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
i find a way foe control speed of zigminer z1 pro fan
with linux ssh
who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?
Jump to: