Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 44.

yrk1957

member

Activity: 531

Merit: 29

Quote from: ?? on ??

Quote from: yrk1957 on October 17, 2018, 12:09:03 PM

Quote from: topoolscom on October 17, 2018, 12:04:51 PM

Good idea, but as you know for confidential reason some buyer don't want share their information.

for some expensive machine not good idea unpacking it just for show it is real, in my opinion, any machine unpacked even one time it is will be 2 hand, everybody like fully new brand goods.

Hi, you had Bittech NS listed on your site earlier and its gone now. Was Bittech a scam?

Hi ,buddy ,Bittech we still not get any active feedbacks from our cooperated buyers ,also they ordered but still not get any stock shipment ,considering it is high risk to buyers so we decided to not list and sell it anymore on akminer.com ,but we will let you know if we have stock in hands

Thanks for the reply, good to see you here.

trendless

newbie

Activity: 2

Merit: 0

I setup the miner yesterday, updated the firmware, and after letting it run i was only getting hashes from the Unit 1 hashboard, the other 3 were dead. I reset the miner directly from the PSU and from the "restart machine" option on the portal. After every reset only the first hashboard showed any activity. I decided to take the hashboards out and swapped them around to different positions. After turning it on again, STILL the only working hashboard was the first unit. Is this a control board problem? Firmware? Any help would be great, thanks.

topoolscom

newbie

Activity: 24

Merit: 0

topools.com

Quote from: streenip on October 18, 2018, 08:09:09 AM

I understand. I think you said you have free electricity too. I don't know how technical you are though. If you know you are going to have to spend +/- 20 minutes a day and occasional downtime to make these work and think that lyra2rev2 will stay profitable for at least 6 months (and the coins won't fork) then go for it. But it is a high risk type of decision.

I purchased 6 Z9 minis with the first and second batch, and they have almost paid for themselves and could still sell them if I wanted... so sometimes it works out. Maybe this one will, maybe it won't but I am banking on bitcoin (because I use nicehash) going back up in the future so that will help my overall profit.

Thanks for this feedback, what daily profitability are you getting from the Z9 mini’s? The price has dropped and Bitmain has them for $630 + $100 for PSU and delivery. I can get 4 or 5 of these hence the question.
[/quote]

Hi streenip:

Glad to hear you just booked one machine of Z1 from www.akminer.com below:
https://www.akminer.com/all-products/lyra2rev2-asic-miner-dayun-zig-z1-ship-now-free-shipping-psu-and-power-cable-included

I believe Jason the owner wants you write this purchase feel here after you have received that machine.

topoolscom

newbie

Activity: 24

Merit: 0

topools.com

Quote from: Tarlatata on October 19, 2018, 03:42:41 PM

Quote from: topoolscom on October 19, 2018, 02:36:10 PM

Quote from: Tarlatata on October 19, 2018, 12:45:21 PM

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Thanks.

Already received a reply from them but it seems BTC payment isn't an option.

Anyone have used one of the seller on https://www.asicminervalue.com/opportunities?
Review for asicminermarket.com seems off and I'd have hard time sending so much btc without legit long-time feedback.

Why not try us, PSU already includes and bitcoin pay are supported:
https://www.akminer.com/all-products/lyra2rev2-asic-miner-dayun-zig-z1-ship-now-free-shipping-psu-and-power-cable-included

below is some recently orders screensnap for you reference.

https://img.krisdiary.com/images/2018/10/18/japan2.png
https://img.krisdiary.com/images/2018/10/18/japan3.png
https://img.krisdiary.com/images/2018/10/18/Japan1.png

Also user"yrk1957" has bought miner from Us before, you can check his answer in this thread earlier.

Can you pm me?
Your setting don't allow me to pm you.

Hi Tarlatata:

Sorry, just enabled the PM so you can PM and I have pm you too.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Ensure that your taxes are in order... esp direct orders from USA from China.

https://www.newsbtc.com/2018/10/16/trumps-trade-tariffs-on-chinese-imports-to-hit-mining-manufacturers-hard/

revenant2017

sr. member

Activity: 728

Merit: 252

Healing Galing

Quote from: yrk1957 on October 17, 2018, 12:19:39 PM

Quote from: guinsous on October 17, 2018, 12:15:06 PM

Is alibaba good way to buy a zig z1+ with teir trade assurance (https://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=zig+z1%2B&viewtype=) ?

Talk to them, they will mostly refuse Trade Assurance and will want Western Union or some other one way payment. That was my experience.

You can report them directly. They maybe know that the product they're selling is still unstable as of the moment so they're removing the Trade Assurance.

revenant2017

sr. member

Activity: 728

Merit: 252

Healing Galing

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Can i ask what your country is? I wonder how much it would cost with customs tax and duties. Shenzen was 4 hrs flight away from our country.

imine2

jr. member

Activity: 98

Merit: 4

Quote from: newgencryptomaker on October 19, 2018, 03:36:04 PM

Quote from: imine2 on October 19, 2018, 03:33:20 PM

Quote from: newgencryptomaker on October 19, 2018, 03:25:51 PM

While the "a=" password argument is traditionally used to select the algorithm for a miner, an algorithm-specific port can also be used. Algorithm-specific ports cause miners which connect to those ports to be automatically assigned the algorithm associated with the port upon connection. The "a=" password argument can still be used to override the port's algorithm. The port assignments are the following:

This only confused

Url and port OK

Workers and password pls

algorithm Lyra2REv2
port 3337

Z1 number 1
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr1

Z1 number 2
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr2

Z1 number 3
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr3

and so on ...

(n=a_name_you_choose)

I need Bitcoin directly payouts correct

Settings:

Payout proportions:
Add Bitcoin

Payout addresses:
Set YOUR BTC payout address
Set Tour threshold to Free Threshold (Default):
0.00236155 ($15.00)

Click "Save" for "Payout Addresses"

NOW

Set Payout proportions for BTC to 100% (if thats what you want.)

Click "Save" for "Payout proportions"

Tarlatata

jr. member

Activity: 102

Merit: 2

Quote from: topoolscom on October 19, 2018, 02:36:10 PM

Quote from: Tarlatata on October 19, 2018, 12:45:21 PM

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Thanks.

Already received a reply from them but it seems BTC payment isn't an option.

Anyone have used one of the seller on https://www.asicminervalue.com/opportunities?
Review for asicminermarket.com seems off and I'd have hard time sending so much btc without legit long-time feedback.

Why not try us, PSU already includes and bitcoin pay are supported:
https://www.akminer.com/all-products/lyra2rev2-asic-miner-dayun-zig-z1-ship-now-free-shipping-psu-and-power-cable-included

below is some recently orders screensnap for you reference.

https://img.krisdiary.com/images/2018/10/18/japan2.png
https://img.krisdiary.com/images/2018/10/18/japan3.png
https://img.krisdiary.com/images/2018/10/18/Japan1.png

Also user"yrk1957" has bought miner from Us before, you can check his answer in this thread earlier.

Can you pm me?
Your setting don't allow me to pm you.

newgencryptomaker

newbie

Activity: 28

Merit: 0

Quote from: imine2 on October 19, 2018, 03:33:20 PM

Quote from: newgencryptomaker on October 19, 2018, 03:25:51 PM

While the "a=" password argument is traditionally used to select the algorithm for a miner, an algorithm-specific port can also be used. Algorithm-specific ports cause miners which connect to those ports to be automatically assigned the algorithm associated with the port upon connection. The "a=" password argument can still be used to override the port's algorithm. The port assignments are the following:

This only confused

Url and port OK

Workers and password pls

algorithm Lyra2REv2
port 3337

Z1 number 1
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr1

Z1 number 2
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr2

Z1 number 3
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr3

and so on ...

(n=a_name_you_choose)

I need Bitcoin directly payouts correct

imine2

jr. member

Activity: 98

Merit: 4

Quote from: newgencryptomaker on October 19, 2018, 03:25:51 PM

While the "a=" password argument is traditionally used to select the algorithm for a miner, an algorithm-specific port can also be used. Algorithm-specific ports cause miners which connect to those ports to be automatically assigned the algorithm associated with the port upon connection. The "a=" password argument can still be used to override the port's algorithm. The port assignments are the following:

This only confused

Url and port OK

Workers and password pls

algorithm Lyra2REv2
port 3337

Z1 number 1
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr1

Z1 number 2
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr2

Z1 number 3
Pool 1:
URL: stratum+tcp://prohashing.com:3337
Worker: your_login_name_at_prohashing.com
Password: n=z1nr3

and so on ...

(n=a_name_you_choose)

newgencryptomaker

newbie

Activity: 28

Merit: 0

While the "a=" password argument is traditionally used to select the algorithm for a miner, an algorithm-specific port can also be used. Algorithm-specific ports cause miners which connect to those ports to be automatically assigned the algorithm associated with the port upon connection. The "a=" password argument can still be used to override the port's algorithm. The port assignments are the following:

This only confused

Url and port OK

Workers and password pls

imine2

jr. member

Activity: 98

Merit: 4

Quote from: newgencryptomaker on October 19, 2018, 11:25:30 AM

How can configuration prohash to Z1

Help me

Url
Address
Password

https://bitcointalksearch.org/topic/z9-list-of-working-poolsfork-updates-4404847

AND

Model Zig Z1 from Dayun mining Lyra2REv2 algorithm

AND

Algorithm-Specific Ports
While the "a=" password argument is traditionally used to select the algorithm for a miner, an algorithm-specific port can also be used. Algorithm-specific ports cause miners which connect to those ports to be automatically assigned the algorithm associated with the port upon connection. The "a=" password argument can still be used to override the port's algorithm. The port assignments are the following:

Algorithm   Port
Scrypt   3333
X11   3334
SHA-256   3335
Equihash   3336
Lyra2REv2   3337
Neoscrypt   3338
Ethash   3339
Quark   3340

metnet

newbie

Activity: 69

Merit: 0

So the Z1 began to arrive for repairs.

Hi Hitsxx,

i request you would you please take a photo closer to chip. i want to read surface of chip.

thanks in advance.

topoolscom

newbie

Activity: 24

Merit: 0

topools.com

Quote from: Tarlatata on October 19, 2018, 12:45:21 PM

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Thanks.

Already received a reply from them but it seems BTC payment isn't an option.

Anyone have used one of the seller on https://www.asicminervalue.com/opportunities?
Review for asicminermarket.com seems off and I'd have hard time sending so much btc without legit long-time feedback.

Why not try us, PSU already includes and bitcoin pay are supported:
https://www.akminer.com/all-products/lyra2rev2-asic-miner-dayun-zig-z1-ship-now-free-shipping-psu-and-power-cable-included

below is some recently orders screensnap for you reference.

https://img.krisdiary.com/images/2018/10/18/japan2.png
https://img.krisdiary.com/images/2018/10/18/japan3.png
https://img.krisdiary.com/images/2018/10/18/Japan1.png

Also user"yrk1957" has bought miner from Us before, you can check his answer in this thread earlier.

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: metnet on October 19, 2018, 02:25:11 PM

Quote from: mattaero on October 19, 2018, 10:29:52 AM

Quote from: grenwolde on October 19, 2018, 10:16:39 AM

I have been mining the Zig Z1 for a couple of weeks now -- have tried a number of sites -- individual coins and multi-coin sites -- best I have come across so far a Prohash and Zpool. I found suprnova had issues with the hashrate falling off precipitously, experienced a less severe gradual decline at blockmaster as well. Zpool seems to be consistent however have to reboot machine every two to three days or so to keep hashrate up. Running at 850mhs -- average hashrate 6-6.2.

Try what was noted earlier in the forum... Change the foillowing in an exported JSON:
From: "auto_frequent":"0","frequency":"850"

to

"auto_frequent":"1","frequency":"1000"

It worked wonders for me.

Hi Mattaero
thanks for help. would you please tell me which version do you use? 14.09 or 26.09 or 30.09?
my other question is your psu wattage 1400w or 1600w do you use with zig z1?
thanks

Currently I have the 14.09 and it is working fine, but I think the person that first made the changes was using the 26.09 firmware and it worked the same way. I don't know about the 30.09.

I have an APW3++ for 3 hash boards (1200W) and a computer PSU for the control unit and 1 hash board (800w). I just have to make sure I always turn on the computer PSU before the hash board PSU's. Either 1400 or 1600w would be fine I am sure.

metnet

newbie

Activity: 69

Merit: 0

Quote from: mattaero on October 19, 2018, 10:29:52 AM

Quote from: grenwolde on October 19, 2018, 10:16:39 AM

I have been mining the Zig Z1 for a couple of weeks now -- have tried a number of sites -- individual coins and multi-coin sites -- best I have come across so far a Prohash and Zpool. I found suprnova had issues with the hashrate falling off precipitously, experienced a less severe gradual decline at blockmaster as well. Zpool seems to be consistent however have to reboot machine every two to three days or so to keep hashrate up. Running at 850mhs -- average hashrate 6-6.2.

Try what was noted earlier in the forum... Change the foillowing in an exported JSON:
From: "auto_frequent":"0","frequency":"850"

to

"auto_frequent":"1","frequency":"1000"

It worked wonders for me.

Hi Mattaero
thanks for help. would you please tell me which version do you use? 14.09 or 26.09 or 30.09?
my other question is your psu wattage 1400w or 1600w do you use with zig z1?
thanks

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: Tarlatata on October 19, 2018, 12:45:21 PM

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Thanks.

Already received a reply from them but it seems BTC payment isn't an option.

Anyone have used one of the seller on https://www.asicminervalue.com/opportunities?
Review for asicminermarket.com seems off and I'd have hard time sending so much btc without legit long-time feedback.

Ah, yes. If you want the trade assurance (which I did) you have to pay with a card or checking account. They are working on BTC payments from what I was told, but it isn't available yet (and wouldn't allow trade assurance). I just don't trust pretty much any ASIC seller unless it is direct from the manufacturer, or I can get trade assurance.

The price is really good though... $4200 or so for a Zig Z1+ (No PSU)

Tarlatata

jr. member

Activity: 102

Merit: 2

Quote from: mattaero on October 19, 2018, 08:38:32 AM

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

Thanks.

Already received a reply from them but it seems BTC payment isn't an option.

Anyone have used one of the seller on https://www.asicminervalue.com/opportunities?
Review for asicminermarket.com seems off and I'd have hard time sending so much btc without legit long-time feedback.

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: ilmaz on October 19, 2018, 12:18:35 PM

both of the z9 and z1 changed instruction is same?

What?

No. This is a Z1 forum. the Z9 requires you to flash the firmware to the Batch 1 version. You'll have to go to the Z9 mini forum to find the file and instructions, I don't have them easily accessible.

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 44. (Read 42511 times)