Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 41.

mattaero

jr. member

Activity: 178

Merit: 2

Actually, It appears that this is the casse. They have $829,000 in volume and their market cap is $632M, it just hasn't been included yet, so it says its 1730 on CMC. Clearly I missed out on HDAC!

Quote from: ?? on ??

Quote from: yrk1957 on October 22, 2018, 02:57:47 PM

Quote from: mattaero on October 22, 2018, 02:54:12 PM

Not only that, but it is not even close to explaining the net hash increases of nearly 5 TH/s or more when looking at all these coins...

Quote from: ?? on ??

Quote from: topoolscom on October 22, 2018, 02:15:49 PM

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

All I see is some bozo no name coin "HDAC" that came out a month ago switching algos.

Seeing as that coin is worth nothing, and is going no where, I could care less, and has nothing to do with Lyra profits.

Well, in that thread someone claimed 7TH/s on HDAC, so if that shifted over to other coins then fall is reasonable.

I find it hard to believe such a shit coin had the highest hash rate out of all the Lyra coins but hell maybe I missed out.

Either way if that's actually true, it does make sense.

yrk1957

member

Activity: 531

Merit: 29

Quote from: mattaero on October 22, 2018, 02:54:12 PM

Not only that, but it is not even close to explaining the net hash increases of nearly 5 TH/s or more when looking at all these coins...

Quote from: ?? on ??

Quote from: topoolscom on October 22, 2018, 02:15:49 PM

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

All I see is some bozo no name coin "HDAC" that came out a month ago switching algos.

Seeing as that coin is worth nothing, and is going no where, I could care less, and has nothing to do with Lyra profits.

Well, in that thread someone claimed 7TH/s on HDAC, so if that shifted over to other coins then fall is reasonable.

streenip

jr. member

Activity: 39

Merit: 1

Quote from: yrk1957 on October 22, 2018, 02:45:55 PM

Quote from: topoolscom on October 22, 2018, 02:15:49 PM

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

Lol! I did not even there was something called HDAC. I suppose Zig price will be sub $3000 soon.

Apologies I am very new to mining and my Z1+ is currently being shipped to me. What does this mean for the algorithm? The way the oke responded to AKMiner was as if the income is going to drop much lower by tomorrow. Is there anything that could be done to keep this machine alive, considering our huge investments for a 3 week old machine (Z1+) and almost 2 month old Z1. I am sure most of us paid between $4200 to $5500 and the best return would have been around $1000. Or, do we have to just suck this up and hope for the best?

mattaero

jr. member

Activity: 178

Merit: 2

Not only that, but it is not even close to explaining the net hash increases of nearly 5 TH/s or more when looking at all these coins...

Quote from: ?? on ??

Quote from: topoolscom on October 22, 2018, 02:15:49 PM

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

All I see is some bozo no name coin "HDAC" that came out a month ago switching algos.

Seeing as that coin is worth nothing, and is going no where, I could care less, and has nothing to do with Lyra profits.

mattaero

jr. member

Activity: 178

Merit: 2

Generally speaking, yes, #xnsub is helpful. I just didn't do well with nicehash at all. Hash rate was low and lots of stale shares.

Quote from: m3y5am on October 22, 2018, 02:47:23 PM

yes , i dont use #xnsub after the pool address , if use this, i have better result ?

change address pool to :

stratum+tcp://lyra2rev2.in.nicehash.com:3347#xnsub

??

Quote from: mattaero on October 22, 2018, 01:37:48 PM

That is strange, mine has been running for 4 days now without a single disconnect. Make sure you include #xnsub after the pool address, I find this helps.

Have you already made the JSON changes recommended earlier in the forum?

Quote from: m3y5am on October 22, 2018, 12:38:44 PM

today i set pool to prohashing , but after 30 min pool is died , and device switch to 2nd pool.
why ?
ok, new i check miningpoolhub

thanks

Quote from: mattaero on October 22, 2018, 12:13:08 PM

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

m3y5am

newbie

Activity: 21

Merit: 0

yes , i dont use #xnsub after the pool address , if use this, i have better result ?

change address pool to :

stratum+tcp://lyra2rev2.in.nicehash.com:3347#xnsub

??

Quote from: mattaero on October 22, 2018, 01:37:48 PM

That is strange, mine has been running for 4 days now without a single disconnect. Make sure you include #xnsub after the pool address, I find this helps.

Have you already made the JSON changes recommended earlier in the forum?

Quote from: m3y5am on October 22, 2018, 12:38:44 PM

today i set pool to prohashing , but after 30 min pool is died , and device switch to 2nd pool.
why ?
ok, new i check miningpoolhub

thanks

Quote from: mattaero on October 22, 2018, 12:13:08 PM

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

yrk1957

member

Activity: 531

Merit: 29

Quote from: topoolscom on October 22, 2018, 02:15:49 PM

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

Lol! I did not even there was something called HDAC. I suppose Zig price will be sub $3000 soon.

topoolscom

newbie

Activity: 24

Merit: 0

topools.com

Quote from: Mordred80 on October 22, 2018, 01:49:04 AM

You guys know what happend to the profitability of this miner?
It went down over 60% in the last 6-8h!

What-To-Mine still shows 45-50$
NiceHash calculator the same: 45-50$
But they don't use real-time data so this is wrong...

Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1
We are down to 20$ -somthing a day

And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.

I believe all you guys may know why daily profit has going down very fast from this thread:

https://bitcointalk.org/index.php?topic=1828453.1400 and check from#1406

mattaero

jr. member

Activity: 178

Merit: 2

That is strange, mine has been running for 4 days now without a single disconnect. Make sure you include #xnsub after the pool address, I find this helps.

Have you already made the JSON changes recommended earlier in the forum?

Quote from: m3y5am on October 22, 2018, 12:38:44 PM

today i set pool to prohashing , but after 30 min pool is died , and device switch to 2nd pool.
why ?
ok, new i check miningpoolhub

thanks

Quote from: mattaero on October 22, 2018, 12:13:08 PM

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

hobbyguy242

newbie

Activity: 16

Merit: 0

I just bought one of these machines and cant seem to find the IP. I looked through this post to see if anyone had a solution to a similar issue and couldn't find it. I have power cycled several times, "reset" the miner, and the LED that flashes is the firmware LED. So, I guess it needs a firmware update to run at all? Shouldn't I be able to at least see the IP on a scan?

Secondly, I am on a Mac (I know.... I don't own a PC, but will go buy a cheap one if I have to...) I was given the latest firmware from the supplier via imageUSB.exe, which I cant open.

Any help would be much appreciated.

m3y5am

newbie

Activity: 21

Merit: 0

today i set pool to prohashing , but after 30 min pool is died , and device switch to 2nd pool.
why ?
ok, new i check miningpoolhub

thanks

Quote from: mattaero on October 22, 2018, 12:13:08 PM

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

mattaero

jr. member

Activity: 178

Merit: 2

Try using Prohashing or miningpoolhub. $18 on nicehash is lower than I would expect, but I had a LOT of stale shares on nicehash that I don't get on prohashing. As of today because of the difficulty spike, it should be like $30-$35 per day.

Quote from: m3y5am on October 22, 2018, 11:40:23 AM

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

Waldano

newbie

Activity: 1

Merit: 0

Hello,
Today I received my Zig Z1 +. Have this connected and started. He is not running properly. The red lamp (firmware) lights up again and again. I also do not find him in my network. Have him restarted several times and also tested another USB stick with the latest firmware. Always the same problem.
I have already run 2 Zig Z1 and had no problems finding these, run without problems!
It would be nice if someone had a solution, thank you!

m3y5am

newbie

Activity: 21

Merit: 0

Hello
The Zig Z1 miner arrived me today
I do not know anything about configurations and pools
My device is now connected to the nichash pool
And it's getting very low ($ 18)
How can I more make a profit?
Which pool is more profitable?
Which currency to mining from which pool?

experienced Miner, Please guide me
I bought the device at the worst time, and today the profitability of the device has been very low,I only hope to see the money of the device in the coming years.

thanks

mattaero

jr. member

Activity: 178

Merit: 2

Yeah, I saw that too. But a simple waterblock that all you have to do is screw on, like an EKWB style would be awesome. Probably two 280mm radiators and regular computer fans I would think (instead of the high CFM fans that come with the ASICs and are LOUD). It probably wouldn't even be very hard if you had a 3d printer and some modeling experience. I feel like if you could sell them for like $75 per waterblock so $300 for a 4 hash board ASIC that keeps the temps at like 35 would sell pretty well.

Quote from: Mordred80 on October 22, 2018, 11:11:49 AM

Quote from: mattaero on October 22, 2018, 10:55:39 AM

What would be super cool would be if a company started developing inexpensive waterblocks... near silent operations for all the ASICS sounds amazing.

I only know a device that cools the miner with oil...
https://minermaster.com/product/minermaster-pro-a-immersion-cooler-stock-without-immersion-oil/

Mordred80

jr. member

Activity: 70

Merit: 1

Quote from: mattaero on October 22, 2018, 10:55:39 AM

What would be super cool would be if a company started developing inexpensive waterblocks... near silent operations for all the ASICS sounds amazing.

I only know a device that cools the miner with oil...
https://minermaster.com/product/minermaster-pro-a-immersion-cooler-stock-without-immersion-oil/

mattaero

jr. member

Activity: 178

Merit: 2

What would be super cool would be if a company started developing inexpensive waterblocks... near silent operations for all the ASICS sounds amazing.

Quote from: metnet on October 22, 2018, 10:45:40 AM

Quote from: Phuripat on October 21, 2018, 08:22:06 PM

How to upgrade thermal paste to more stability and cool the chips.
Original thermal paste will dry and lower conduct the heat. And not full of contact surface.

1.this is picture front and back of board
https://ibb.co/iZ8bwL
https://ibb.co/nKjS30

2. Screw of at front 6 screw each heat sink then clean the old thermal paste , you will see a not full contact surface
then unscrew 2 screw to release the back plate.(Direct contact to PCB board) and clean
https://ibb.co/mvU5qf
https://ibb.co/mwFObL
https://ibb.co/fYxEi0

3. clean PCB board
https://ibb.co/dGbUGL

4. place a Arctic MX-4. I choose it because high conductivity of heat 8.5watt/MK , cheap and durability for 8 years.
put the black plate to cover the back and screw 2 screw
https://ibb.co/jpwUGL

put thethermal paste to your chips and spread to make sure fully contact surface.
https://ibb.co/etiLO0

Finish, result decrease in 2-3 celcius in the same condition. better stability for hashing.
I use approximate 10-12g of arctic MX-4. then you must prepare enough thermal paste.
statistic from nicehash, this is Z1 not Z1+
https://ibb.co/bQTC30

nice job thank you very much for all photos
i request that if possible could you take a closer photo for chip surface.
what kind number or wrting on it

metnet

newbie

Activity: 69

Merit: 0

Quote from: Phuripat on October 21, 2018, 08:22:06 PM

How to upgrade thermal paste to more stability and cool the chips.
Original thermal paste will dry and lower conduct the heat. And not full of contact surface.

1.this is picture front and back of board
https://ibb.co/iZ8bwL
https://ibb.co/nKjS30

2. Screw of at front 6 screw each heat sink then clean the old thermal paste , you will see a not full contact surface
then unscrew 2 screw to release the back plate.(Direct contact to PCB board) and clean
https://ibb.co/mvU5qf
https://ibb.co/mwFObL
https://ibb.co/fYxEi0

3. clean PCB board
https://ibb.co/dGbUGL

4. place a Arctic MX-4. I choose it because high conductivity of heat 8.5watt/MK , cheap and durability for 8 years.
put the black plate to cover the back and screw 2 screw
https://ibb.co/jpwUGL

put thethermal paste to your chips and spread to make sure fully contact surface.
https://ibb.co/etiLO0

Finish, result decrease in 2-3 celcius in the same condition. better stability for hashing.
I use approximate 10-12g of arctic MX-4. then you must prepare enough thermal paste.
statistic from nicehash, this is Z1 not Z1+
https://ibb.co/bQTC30

nice job thank you very much for all photos
i request that if possible could you take a closer photo for chip surface.
what kind number or wrting on it

mattaero

jr. member

Activity: 178

Merit: 2

Just doing the basic math... it would only take about 1,000 Zig Z1 miners to increase the hash rate that much, which would be probably $4 million. For good sized mining operations, this would not be difficult to achieve. It seems weird that it happened all at once, but I bet a medium size mining operation saw the profitability and bout like 1,000 miners. Even if it takes a year to pay off (which is half the current return) they still are doing great.

Quote from: Mordred80 on October 22, 2018, 09:35:11 AM

You know what's funny about this?
The hashrate of Lyra2Rev2 went actually down on Nicehash.
Not by much but it did.

https://www.nicehash.com/algorithm/lyra2rev2

Quote from: Mordred80 on October 22, 2018, 04:59:18 AM

- Vertcoin went up from 1,3-1,5 TH/s to over 3 TH/s https://www.coinwarz.com/network-hashrate-charts/vertcoin-network-hashrate-chart

- MonaCoin went up from 3,8-39 TH/s to over 8 TH/s https://www.coinwarz.com/network-hashrate-charts/monacoin-network-hashrate-chart

- Straks went up from 24 to over 50 https://www.crypto-coinz.net/coin-info/?100-Straks-STAK-Lyra2v2-calculator/

- Galactrum went from34 to over 70 https://www.crypto-coinz.net/coin-info/?45-Galactrum-ORE-Lyra2v2-calculator/

- HanaCoin went up from 19 to over 30 https://www.crypto-coinz.net/coin-info/?188-Hanacoin-HANA-Lyra2v2-calculator/

- Verge Lyra2Rev2 hashrate is going up and down: https://www.crypto-coinz.net/coin-info/?121-VERGELyra2v2-XVG-Lyra2v2-calculator
But the diff is going up https://www.coinwarz.com/difficulty-charts/verge-difficulty-chart

Theory 1:
Big order went out (Z1/Z1+) and the miners got online this night.

Theory 2:
Another manufacturer is testing a new miner.

Mordred80

jr. member

Activity: 70

Merit: 1

You know what's funny about this?
The hashrate of Lyra2Rev2 went actually down on Nicehash.
Not by much but it did.

https://www.nicehash.com/algorithm/lyra2rev2

Quote from: Mordred80 on October 22, 2018, 04:59:18 AM

- Vertcoin went up from 1,3-1,5 TH/s to over 3 TH/s https://www.coinwarz.com/network-hashrate-charts/vertcoin-network-hashrate-chart

- MonaCoin went up from 3,8-39 TH/s to over 8 TH/s https://www.coinwarz.com/network-hashrate-charts/monacoin-network-hashrate-chart

- Straks went up from 24 to over 50 https://www.crypto-coinz.net/coin-info/?100-Straks-STAK-Lyra2v2-calculator/

- Galactrum went from34 to over 70 https://www.crypto-coinz.net/coin-info/?45-Galactrum-ORE-Lyra2v2-calculator/

- HanaCoin went up from 19 to over 30 https://www.crypto-coinz.net/coin-info/?188-Hanacoin-HANA-Lyra2v2-calculator/

- Verge Lyra2Rev2 hashrate is going up and down: https://www.crypto-coinz.net/coin-info/?121-VERGELyra2v2-XVG-Lyra2v2-calculator
But the diff is going up https://www.coinwarz.com/difficulty-charts/verge-difficulty-chart

Theory 1:
Big order went out (Z1/Z1+) and the miners got online this night.

Theory 2:
Another manufacturer is testing a new miner.

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 41. (Read 42511 times)