Thank you code3gen.
Got it to hash Power Mining pool with right Wallet.
I had to put it on DHCP to get it permanently online.
The zig z1 hashes less then advertise and seems to be unstable. % of rejected shares is high (10 to 15%).
Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 55. (Read 42511 times)
here is my feedback.
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
The Z1's seems to send a lot of stale shares(these are being shown as rejects on powermining pool, and seems to be doing the same on nicehash i see). That is software related issue, so i hope they will supply an update soon to fix this.
Hard to see your image https://www.screencast.com/t/8cvezEcAnD, but seems like lots of chips that does not work? If so, try to reduce frequency slightly.. You won`t get advertised hashrate, but maybe some more than now if those chips becomes active again. You would probably have to return the faulty hashing board
Just received the Z1. Got it connected to network. Put the IP4 to static.
Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "900",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "7",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": false,
"lyra2rev2-cutoffenable": false
}Use XVG address ;-)
VERGEd validateaddress vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c
{
"isvalid" : false
}
if you want to modify the config files on the filesystem then you need to get the root password. if anyone can crack the password here is the hash :
Username: root
PW Hash: $6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHL
Username: fa
PW Hash: $6$muvIxroU$Lcuu06mrLbEONRLK312njB.RTI4dbC9QdJAZ6Bam0RnJpibRO2K62XHBKRKRo3U1IDFTtTAdXb/h.vp8vXuio1
regards
hash for root not full specified.
Here is the correct:
Code:
root:$6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHLt4XSfDBTyt52n7ORs.1hpj.
Decryption Result: root:envision
Use with pleasure.
fantastic!
thank you a lot
You guys got any solutions to control the fan speed? I live in an apartment complex and you can hear it in the hallway a door down lol. I'm bound to get a noise complaint from the police soon. It's annoying cuz the mines are running at 37C so plenty of leeway to run slower.
Take-off outtake fan. And plug a simulator that fools the miner. if you want to modify the config files on the filesystem then you need to get the root password. if anyone can crack the password here is the hash :
Username: root
PW Hash: $6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHL
Username: fa
PW Hash: $6$muvIxroU$Lcuu06mrLbEONRLK312njB.RTI4dbC9QdJAZ6Bam0RnJpibRO2K62XHBKRKRo3U1IDFTtTAdXb/h.vp8vXuio1
regards
hash for root not full specified.
Here is the correct:
Code:
root:$6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHLt4XSfDBTyt52n7ORs.1hpj.
Decryption Result: root:envision
Use with pleasure.
@Hitsxx
thank you for sharing.
regards
bitreo
Dayun Miner is the new name for PinIdea. It is evident just from the design and build quality of the miner - which is very good, I might add.
Can somebody get a full raw image of the USB key (dd clone) instead of just the files?
Can somebody get a full raw image of the USB key (dd clone) instead of just the files?
source that PinIdea = Dayun?
here is my feedback.
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
How did you get the extra fan controls? got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
here is my feedback.
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
https://www.screencast.com/t/BLnyFx0I
https://www.screencast.com/t/pBDcSQmGpwe
and this is the results
https://www.screencast.com/t/2nltNThwIBQ
hash rate quite erratic but never higher than 5GH
https://www.screencast.com/t/8cvezEcAnD
nicehash stats
https://www.screencast.com/t/XuROlvulVA
any feedback or suggestion, very welcome
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
https://www.screencast.com/t/BLnyFx0I
https://www.screencast.com/t/pBDcSQmGpwe
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}and this is the results
https://www.screencast.com/t/2nltNThwIBQ
hash rate quite erratic but never higher than 5GH
https://www.screencast.com/t/8cvezEcAnD
nicehash stats
https://www.screencast.com/t/XuROlvulVA
any feedback or suggestion, very welcome
Just received the Z1. Got it connected to network. Put the IP4 to static.
Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Try NH or MPH, if those work then the Z1 is not compatible with that pool Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "900",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "7",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": false,
"lyra2rev2-cutoffenable": false
}
Just received the Z1. Got it connected to network. Put the IP4 to static.
Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Tried to setup with different pools. But no luck, it stays offline.
When I go to Dashboard Widget, it says - THE MINER MAY NOT BOOT.
Anyone has an idea how to fix this?
Here is the json conf with powermining.pw
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4533",
"user": "vtc1qsqgshl2dkxg94nk7usag2nvmngvqvnkszgz02c",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "900",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "7",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": false,
"lyra2rev2-cutoffenable": false
}What did you pay for it? One of my suppliers in China quoted $4600 (this is just the machine, no shipping, psu, etc)...
It looks interesting, but isn't Vert and Mona supposed to be switching to a new algo in Q1? My supplier also said this is going to be the only production run of these devices (due to this) - which could be a good or bad thing, depending on how you look at it...
It looks interesting, but isn't Vert and Mona supposed to be switching to a new algo in Q1? My supplier also said this is going to be the only production run of these devices (due to this) - which could be a good or bad thing, depending on how you look at it...
The manufacture is a bullshit! They said this is the only batch of 2400 miners in oder to assure the first batch miner's profit.
But they just released a new version miner of 7.2 GH/s.
Thanks for your help so far.
My network is 192.168.168.x
and it doesn't find anything connecting to 192.168.168.100 or 192.168.168.1
My network is 192.168.168.x
and it doesn't find anything connecting to 192.168.168.100 or 192.168.168.1
192.168.168.100 ? Are you sure?
HEEEEEELP! 
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
You need to program in your wallet address and the correct pools before it'll stop displaying that. Make sure it says online in the corner as well.
When you say "programm in" do you mean simply set our pools? We somehow dont make it to set that "offline" in red to be green and "online"...what could it be?
HEEEEEELP!
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
You need to program in your wallet address and the correct pools before it'll stop displaying that. Make sure it says online in the corner as well.
How much weight this Miner
Any update firmware
Thanks advance
Any update firmware
Thanks advance
ANYONE KNOWS WHERE THE F*** IS THE SUPPORT FOR THIS MINER?
I mean, can it be just nobody is trying to help out that was actually part of the development of the miner?
China, you really et new levels in customer service over and over again
I mean, can it be just nobody is trying to help out that was actually part of the development of the miner?
China, you really et new levels in customer service over and over again
HEEEEEELP!
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
Hi there! Anyone experiencing also the circles turning and turning and no hashing?
Would be great if someone could post how the updating of firmware works. It seems that its not that easy.
Thanks!
Thanks for your help so far.
My network is 192.168.168.x
and it doesn't find anything connecting to 192.168.168.100 or 192.168.168.1
My network is 192.168.168.x
and it doesn't find anything connecting to 192.168.168.100 or 192.168.168.1
192.168.168.100 ? Are you sure?
https://ibb.co/fu41De
Was that a multi-GPU attack? Just wondering.
Edit: NVM, straight up dictionary.
Yes. Hashcat, 8 pcs GF1070 and carefully, with love, selected dictionaries.
Jump to: