[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: MrJaekin on April 05, 2022, 10:40:21 AM

I'm getting a "Error while getting info from device" error when I try to connect to my Simple Rig Resetter.. Any advice would be great.. I've already changed ethernet cables and switch ports... also unplugged and plugged it back in to reboot it. Is there a way to completely reset it? Thanks!

Yeah this is caused by some windows update. Basically windows started to restrict ports.
So You need to find any other PC/Laptop that is able to run that tool without this error.
Also make sure that You have enabled ONLY ONE network interface. So if you are using ethernet then disable wifi and vpns / teamviewer interfaces etc.
Then You need to use your current tool to upgrade SRRv2 firmware (You have version hardware v2 right ? Dont run it on v1 if you have it)
https://download.simplemining.net/SRR/Tool/10.0.0.18/SRRTool.exe
Upgrade SRRv2 to 1.5 using this firmware file: https://download.simplemining.net/SRR/Firmware/SimpleRigReseter-v1.5.hex

After process is completed (wait 1 minute) and close that old tool. Download newer tool
https://download.simplemining.net/SRR/Tool/10.0.0.19/SRRTool.exe
And just connect. It will work normally always under any windows from now on.

Please let me know if all went well.

MrJaekin

sr. member

Activity: 275

Merit: 258

I'm getting a "Error while getting info from device" error when I try to connect to my Simple Rig Resetter.. Any advice would be great.. I've already changed ethernet cables and switch ports... also unplugged and plugged it back in to reboot it. Is there a way to completely reset it? Thanks!

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: DJMinerOne on April 10, 2019, 09:06:23 PM

My SRR arrived yesterday and it works great! There are certainly home-brew methods do set this up a little cheaper. However, the quality, features, and UI make this a time saver.

I still need to figure out the port forwarding capability... I've never been able to get that to work with any device.

You wrote to our support right ? This is solved ? If not then please do so on [email protected]

Quote from: fmz89 on March 13, 2019, 03:16:26 AM

Hmmm, lol to expensive, i build for 128 rig under 100$ using raspi&modem with ttl ,
sms/text(remote shutdown,reset,auto report to your number), web(using ddns ip), ssh remote.
Nice build for your device

Well yes but our device offers electrical insulation and much more features that are listed in first post and it just work out of the box as SimpleMining.net Operating System.
I guess i could build car much cheaper than buying one also

But sure, if you have skills then why not to use them.

Quote from: Dhino on May 03, 2019, 03:34:54 PM

Can adapter be purchase separately? I have purchased used extension board and it has missing adapters.

For my clients i am selling those without extra costs.
No problem, please just write to [email protected]
Hmm, or was ot you did wrote to our support and i sold you 100pcs last month ? Cheesy

Sorry, i am not so active on forum. Please always write to our support [email protected] as we are checking inbox few times per day.

Dhino

jr. member

Activity: 41

Merit: 1

Can adapter be purchase separately? I have purchased used extension board and it has missing adapters.

DJMinerOne

newbie

Activity: 17

Merit: 0

My SRR arrived yesterday and it works great! There are certainly home-brew methods do set this up a little cheaper. However, the quality, features, and UI make this a time saver.

I still need to figure out the port forwarding capability... I've never been able to get that to work with any device.

fmz89

legendary

Activity: 1762

Merit: 1002

Hmmm, lol to expensive, i build for 128 rig under 100$ using raspi&modem with ttl ,
sms/text(remote shutdown,reset,auto report to your number), web(using ddns ip), ssh remote.
Nice build for your device

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: adamvp on February 22, 2019, 10:36:50 AM

Do you really think we will have bull market again soon?
I'd like to invest some money in mining but I am not quite sure we will see any higher rises soon..

No idea. I do not do speculations

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: tytanick on January 24, 2019, 04:35:24 PM

Edited (rewritten)

Spoiler alert !
The prices in shop.simplemining.net are much cheaper for some time.
SimpleRigResetterv2 is cheaper -40$
ExtensionBoard is cheaper -50$
This is caused by low demand and high stock as we just received another batch of devices.
So advice - if you want our resetter or EB, now is the good time to buy it.
Ofcourse do not buy it unless you accually need it !!!
We want our customers to be happy and not just "sell it for $$$"
When bitcoin market will rise again, we will need to rise prices again as the demand will be too high compared to our supply powers

Lets call it "Black ~~friday~~ Q1 2019" Cheesy

Do you really think we will have bull market again soon?
I'd like to invest some money in mining but I am not quite sure we will see any higher rises soon..

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Marvell2 on January 24, 2019, 04:38:43 PM

Quote from: tytanick on January 24, 2019, 04:35:24 PM

Spoiler alert !
The prices for EB and SRRv2 are down by 40-50$ due to low demand and high stock

Lol been waiting for this time to order a few tonight lol

Should i rise the price then again ? Tongue

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: tytanick on January 24, 2019, 04:35:24 PM

Spoiler alert !
The prices for EB and SRRv2 are down by 40-50$ due to low demand and high stock

Lol been waiting for this time to order a few tonight lol

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Edited (rewritten)

Spoiler alert !
The prices in shop.simplemining.net are much cheaper for some time.
SimpleRigResetterv2 is cheaper -40$
ExtensionBoard is cheaper -50$
This is caused by low demand and high stock as we just received another batch of devices.
So advice - if you want our resetter or EB, now is the good time to buy it.
Ofcourse do not buy it unless you accually need it !!!
We want our customers to be happy and not just "sell it for $$$"
When bitcoin market will rise again, we will need to rise prices again as the demand will be too high compared to our supply powers

Lets call it "Black ~~friday~~ Q1 2019" Cheesy

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: megax05 on June 24, 2018, 08:36:16 AM

I am having some difficulties with SRR I have the latest version and some of my rigs just turned off and no more responding and had to manually reset the rig also some rigs are stucked in miner loading Solo/pool txt and not resetting and still send alive packets I dont know what is wrong

Please write to me at [email protected]
I will check this.

megax05

newbie

Activity: 13

Merit: 0

I am having some difficulties with SRR I have the latest version and some of my rigs just turned off and no more responding and had to manually reset the rig also some rigs are stucked in miner loading Solo/pool txt and not resetting and still send alive packets I dont know what is wrong

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: grotoc on June 07, 2018, 11:57:22 AM

Hi,

I'm sorry to insist, but I really need to have access of the parameters of the extension board outside Windows. Please give us something, a simple web page with json data would be perfect.

Matking another firmware is now out of table.
Still the API is available and if you will ask me on [email protected] - i can send it.
We just would need to write script that binds to interface and listens packets.
Right now this cannot be done by my company as we are focusing on little different things.
Anyway i have something in my mind to do - and that will be ability to manage basic feeatures directly from simplemining.net dashboard.
Yet i cannot tell when it will be becasue i do not have road map for that right now.

grotoc

full member

Activity: 198

Merit: 100

Hi,

I'm sorry to insist, but I really need to have access of the parameters of the extension board outside Windows. Please give us something, a simple web page with json data would be perfect.

Santaz

newbie

Activity: 4

Merit: 0

Quote from: tytanick on May 10, 2018, 10:05:09 AM

Quote from: Santaz on May 10, 2018, 04:22:36 AM

Is that possible to use dynamic dns with SRRv2?

It is possible to use dyndns in router and then make in router static forward or 1051 port.
Then you just need to enter proper ip address in "manual connect".
I did not tested domain names typed there but if it will not work then enter ip address.

Seem like its not working on domain name. Once trying manual connect its show up "incorrect data syntax!"

with ip address it working just fine.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Santaz on May 10, 2018, 04:22:36 AM

Is that possible to use dynamic dns with SRRv2?

It is possible to use dyndns in router and then make in router static forward or 1051 port.
Then you just need to enter proper ip address in "manual connect".
I did not tested domain names typed there but if it will not work then enter ip address.

SHOP SRR/EB NEWS:
We decided to leave BitPay payment processor and delete from our shop.
Recently they made changes in their system that is very difficult for many users.
They are using special protocol which is supported by only few wallets....

But, now we succesfully integrated CoinGate payemnt gateway with ability to pay with many cryptos !

Bitcoin, Ethereum, ETC, ZEC, LTC and many others

And ofcourse you can pay via PayPal as well as usual.

We also using UPS shipping which is so far good and cheaper in bigger weights than DHL.

Santaz

newbie

Activity: 4

Merit: 0

Is that possible to use dynamic dns with SRRv2?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote

It looks like it has a dictionary exception? (All I entered was 'RIG01' - without the quotes - into the dialog box). It is installed on a stand alone Windows 10 PC which in turn gives me access to all of the rigs on the network.

@ tytanick - Any ideas?

Be sure you are running SRRTool.exe as Administrator (right click, run as admin).
Should be working.
Can you move it to somewere else and check it also ?

DevonMiner

sr. member

Activity: 471

Merit: 250

OK, so I've upgraded both my SRR boards, reset all the rigs and all looks good.

A small problem ... I would like to use the notes feature to label each rig ... but can't use it as I keep getting an error:

Code:

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at PcRigResetter.MainForm.editNoteToolStripMenuItem_Click(Object sender, EventArgs e)
   at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
   at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
   at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ToolStrip.WndProc(Message& m)
   at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2633.0 built by: NET471REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
SRRTool
    Assembly Version: 1.0.0.17
    Win32 Version: 1.0.0.17
    CodeBase: file:///C:/Users/Rig%20Control/Desktop/Software/SRR%20Windows%20Tool/SRRTool%2010.0.0.17%20(2018.04.27).exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2556.0 built by: NET471REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2556.0 built by: NET471REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2556.0 built by: NET471REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2556.0 built by: NET471REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2633.0 built by: NET471REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2612.0 built by: NET471REL1LAST_B
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.ServiceProcess
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2556.0 built by: NET471REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.ServiceProcess/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:


    


When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

It looks like it has a dictionary exception? (All I entered was 'RIG01' - without the quotes - into the dialog box). It is installed on a stand alone Windows 10 PC which in turn gives me access to all of the rigs on the network.

@ tytanick - Any ideas?

Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! (Read 53273 times)