[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 9.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

got my 2 SRR V2 today they work great

I still have not been able to figure out to get the watchdog deal working on windows 10

The confusing part to me is it says the watchdog Agent needs to be in the same directoroy as the SRRTool

does the SRR tool automatically install the watchdog on rigs it is connected to ? or do you have to install the watchdog manually on each Rig ?

Not that I can install the Agent anyways, even after I unblock the app on the main computer I am using to manage rigs I see this when I try to run it

Code:

"Cannot start service from the command line or debugger. A windows Service must first be installed(using installutil.exe)
and then started with the ServerExplorer, Windows Services Administrative tool or the NET START command. "

I asked about this in the past and never got a satisfactory answer any ideas ?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

looks like its arriving by the end of the week thanks for the update

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Marvell1 on August 17, 2017, 09:31:47 PM

whats up with shipping on these to the usa, ordered 2 aug 6 still nit heard or seen anything Huh

Hi, all orders ordered before 9 August were shipped.
If you didnt received any email with tracking or package please write to me an email
[email protected]
With order number and your email. We will check it.

P.S i checked someone from USA with 2xSSR and in deed the package was sent at 10 August and today at 18 August it just arrived to Your country....
EMS courier sometimes failing Sad

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

whats up with shipping on these to the usa, ordered 2 aug 6 still nit heard or seen anything Huh

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Nope, if miner hangs then OS shoudl do something.
My Resetter is here only if OS freezes and cant do anything about it.

New Firmware will be with Extension Boards Arrival. Still my developer is also really busy these dasy and this is gelling longer and longer to finish.
We just need to wait.

bensam1231

legendary

Activity: 1764

Merit: 1024

If you're looking for a small side project that might be up your alley and probably would sell, there aren't many options for line voltage level control over actual fans used for ventilation. Right now I use things like greenhouse controls, which surprisingly aren't that advanced. So for instance with a motherboard, you can setup a temperature curve which will ramp up the fan speed based on temperature. Ventiliation fans don't have anything like this. I've only seen one device and it doesn't work very good. Most of them take form of turn fan on/off based on temperature and depending on the difference in temperature. Ramping up fan speed isn't apparently a thing.

Even a more advanced fan on/off controller based on room temperature would be nice, but dynamic fan control would be great. We're talking about 120v fans. Right now I also use a variac to vary my fan speeds as well, although there are plenty of cheap digital variable fan speed controls (which depending on your fan can reduce the fan life or just not work at all).

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Hi,
Right now it has simple webpage that you can only monitor rigs.
But there will be also more advanced webpage for makins some basic actions like turn off or on.
Right now complete managment can be done only from windows via SRR Tool application.

Thx

I guess its paying off slowly but i am happy that i could made life easier for many people

fuzion1

member

Activity: 111

Merit: 10

Quote from: tytanick on July 29, 2017, 07:58:36 AM

Yes i am sending tracking numbers for every order when it is sent.
Now average shipping time of fresh placed orders is about 3-7 days.
Stock is ok, and i am waiting also for Extension Boards.

There will be third product that i decided to do (for my purpuse) but meaby someone will also like it.
My lab guys already did humidity+temperature sensor which can be plugged into SRRv2/v1 slot instead of Extension Board

So we will be able to read remote temperature in room

I guess not many will be interested in such addon especially when it wont be cheap.
I dont have prices right now but i guess it will be something like 40-60$ for sensor board.
The sensor could be plugged to SSR via rj45 ethernet cable (up to 100 meters) + about 50 cm sensor cable.
I will make announcment about this when i will have extension boards.

I wanted to say THANK YOU for making such a wonderful product. I got 3 simple rig resetters, and installed them all yesterday. Everything works great, and it has already kept me from going to the shop to reset 4 times! I will be very interested in your humidity+temperature sensor. I am also waiting patiently for the extension board. I will purchase one as soon as it is available.

I did have one question about simple rig resetter. Is there a website I can reset my machines on, or is it all done through the software? I dont use simpleminingOS.

Thank you again for your hard work. I hope it is paying off for you.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Yes i am sending tracking numbers for every order when it is sent.
Now average shipping time of fresh placed orders is about 3-7 days.
Stock is ok, and i am waiting also for Extension Boards.

There will be third product that i decided to do (for my purpuse) but meaby someone will also like it.
My lab guys already did humidity+temperature sensor which can be plugged into SRRv2/v1 slot instead of Extension Board

So we will be able to read remote temperature in room

I guess not many will be interested in such addon especially when it wont be cheap.
I dont have prices right now but i guess it will be something like 40-60$ for sensor board.
The sensor could be plugged to SSR via rj45 ethernet cable (up to 100 meters) + about 50 cm sensor cable.
I will make announcment about this when i will have extension boards.

engineerking

newbie

Activity: 19

Merit: 0

Quote from: bulgar73 on July 11, 2017, 10:49:05 PM

Hi!

please can someone write step by step manual to install SRR in Linux, ethOS ?

thnx wm
BTC

I took this script:
https://simplemining.net/download/SRR/Tool/SRR-Agent-Linux-v2.sh

Changed the serial number and the slot number. Placed it in the home directory on ethos.

type sudo chmod +x SRR-Agent-Linux-v2.sh

type crontab -e

then added:
"@reboot /home/ethos/SRR-Agent-Linux-v2.sh"

This will run the script at startup. Seemed to work for me.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: tytanick on July 24, 2017, 09:28:57 AM

Quote from: cheet on July 23, 2017, 08:38:13 PM

Any update on when extension boards might be available? I have a SSRv1 now and need it, but thinking about just buying a SSRv2 since that appears to be available right now.

I have information from my device head developer that we need still about 2 months to be EB available.
The SSRv2 is indeed available now all the time and the shipping process is more smooth becasue we are almost on time sending SSRs.

Looking forward to getting my first ssrv2. I've been running your software for over two months now and let me tell you I've had many less headaches. It'll be great to add ability to remotely hard reboot. Great stuff!

Quick question will you send me a trackable shipping number when it ships?

BR

bensam1231

legendary

Activity: 1764

Merit: 1024

Looks like it works, I was going to the old website which doesn't exist anymore (for v1).

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: tytanick on July 25, 2017, 07:34:43 AM

Quote from: bensam1231 on July 25, 2017, 02:08:58 AM

Website is down? Was going to check, did you ever address the issue of needing to have local reset buttons in addition to the reseter? In other words having a normal cable switch hooked up along with the reseter? Something like a passthrough block or splitter.

Hi, the website is online, please check again.

Yes i was thinking about this but its too much afford to make this.
Lets do this via tool

Still can't load the website. Stuck on loading page. For a splitter you wouldn't have to do anything fancy just a 'peg' on the cables that another wire could plug into, like the normal motherboard header.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: bensam1231 on July 25, 2017, 02:08:58 AM

Website is down? Was going to check, did you ever address the issue of needing to have local reset buttons in addition to the reseter? In other words having a normal cable switch hooked up along with the reseter? Something like a passthrough block or splitter.

Hi, the website is online, please check again.

Yes i was thinking about this but its too much afford to make this.
Lets do this via tool

bensam1231

legendary

Activity: 1764

Merit: 1024

Website is down? Was going to check, did you ever address the issue of needing to have local reset buttons in addition to the reseter? In other words having a normal cable switch hooked up along with the reseter? Something like a passthrough block or splitter.

S_Natural

member

Activity: 154

Merit: 11

I've received SSRv2 yesterday. Nice packed and manual Cheesy

After set up the IP for the SSR, It works great.

Thanks so much Tytanick.
I use Win 10, IMO if we can use the device online like SMO it'll be perfect.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: cheet on July 23, 2017, 08:38:13 PM

Any update on when extension boards might be available? I have a SSRv1 now and need it, but thinking about just buying a SSRv2 since that appears to be available right now.

I have information from my device head developer that we need still about 2 months to be EB available.
The SSRv2 is indeed available now all the time and the shipping process is more smooth becasue we are almost on time sending SSRs.

cheet

newbie

Activity: 59

Merit: 0

Any update on when extension boards might be available? I have a SSRv1 now and need it, but thinking about just buying a SSRv2 since that appears to be available right now.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: KaydenC on July 12, 2017, 08:49:02 PM

Quote from: StanchoBS on July 12, 2017, 11:19:02 AM

This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.

Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.

You can forward default port (udp_ to external IP if you have static one. Then you could connect from internet.

KaydenC

sr. member

Activity: 610

Merit: 265

Quote from: StanchoBS on July 12, 2017, 11:19:02 AM

This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.

Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.

Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 9. (Read 53231 times)