how can i use the Web interface ?
how can i turn on or off my rig at SMOS by SRR ?
Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 8. (Read 53239 times)
September 06, 2017, 05:44:56 PM
September 03, 2017, 05:13:23 AM
I have some rigs on smOS and some on another OS.
Will the SRR work for both?
If you will add one simple script (for linux) then it will.Will the SRR work for both?
Take a look into manual PDF.
September 02, 2017, 11:33:56 AM
I have some rigs on smOS and some on another OS.
Will the SRR work for both?
Will the SRR work for both?
September 02, 2017, 09:01:38 AM
Hi guys, i made mistake after all.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
Wow, good news!
Is this required to flash a new drive with this image or is this possible to update from previous boot drive?
Thank you!
Yes complete reflash.
September 01, 2017, 09:05:53 PM
Hi guys, i made mistake after all.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
Wow, good news!
Is this required to flash a new drive with this image or is this possible to update from previous boot drive?
Thank you!
September 01, 2017, 03:51:47 PM
Hi guys, i made mistake after all.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
The prefious image:
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
was in deed R OS
Thats why id didnt worked.
Now its True RX image with fix. please redownload it.
September 01, 2017, 03:33:13 PM
Enter activation key:
http://i66.tinypic.com/6pn437.png
When I go to the IP address of the device. What is the activation key?
http://i66.tinypic.com/6pn437.png
When I go to the IP address of the device. What is the activation key?
Lol what ?
I see that first time in my life.
Its not SRR feature.
Meaning its not mine, where do yo usee that ?
When I go to the IP address of the SRR, that's what it takes me to. Please check your email. I sent screen shots of what I see when I try to get SRR on my windows machine.
September 01, 2017, 03:26:02 PM
Enter activation key:
When I go to the IP address of the device. What is the activation key?
When I go to the IP address of the device. What is the activation key?
Lol what ?
I see that first time in my life.
Its not SRR feature.
Meaning its not mine, where do yo usee that ?
September 01, 2017, 02:39:22 PM
It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
There is no factory reset feature (no need for that).
Please write to [email protected] - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi
So on my main computer, I can no longer see the SRR. But I made a new rig running windows and it sees the device fine. Why is that the case?
I'd like to see it on the computer I use to monitor all my rigs and do my main work on.
Also if someone can make a guide on how to host it to the web so I can access it from anywhere I will pay for your time!
Emailed. Hoping to get this figured out.
September 01, 2017, 11:40:27 AM
It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
There is no factory reset feature (no need for that).
Please write to [email protected] - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi
So on my main computer, I can no longer see the SRR. But I made a new rig running windows and it sees the device fine. Why is that the case?
I'd like to see it on the computer I use to monitor all my rigs and do my main work on.
Also if someone can make a guide on how to host it to the web so I can access it from anywhere I will pay for your time!
September 01, 2017, 07:55:39 AM
It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
There is no factory reset feature (no need for that).
Please write to [email protected] - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi
August 30, 2017, 05:05:54 PM
This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.
Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.
I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.
Be sure you disabled all other connection interfaces than LAN.
So disable all virtualbox, and wifi. See if it will help.
It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'
August 30, 2017, 01:35:12 PM
This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.
Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.
I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.
Be sure you disabled all other connection interfaces than LAN.
So disable all virtualbox, and wifi. See if it will help.
August 30, 2017, 10:35:59 AM
This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.
Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.
I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.
August 30, 2017, 10:22:24 AM
I have everything set up correct but when I go to open the .exe it doesn't see my SRR on my network.
It did at first, but it doesn't anymore. Any reason why it's not showing up?
It did at first, but it doesn't anymore. Any reason why it's not showing up?
August 27, 2017, 06:52:20 PM
I have a version 1 and need to expand.
August 25, 2017, 05:03:25 AM
Site is not working properly? I can't register or access main pages.
Nope i didnt see any problem. Its fully working.Try different browser or different internet connection meaby ?
August 24, 2017, 09:07:12 AM
Site is not working properly? I can't register or access main pages.
August 23, 2017, 06:50:19 PM
Hi, first of all dont run SRR Agent.exe
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to [email protected] with team viewer informations, i can enter and help you but please try it first yourself
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to [email protected] with team viewer informations, i can enter and help you but please try it first yourself
I'll give it a shot, thanks
August 23, 2017, 05:39:04 AM
Hi, first of all dont run SRR Agent.exe
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to [email protected] with team viewer informations, i can enter and help you but please try it first yourself
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to [email protected] with team viewer informations, i can enter and help you but please try it first yourself
Jump to: