[Donated $2k+ To Charity] Clean Water Coin: A Crypto Charity (Pure PoS) - page 16.

YouIsPeng

full member

Activity: 175

Merit: 100

Quote from: CleanWaterCoin on June 26, 2014, 06:58:27 PM

1.7.0.2

Updated Windows Wallet: https://drive.google.com/file/d/0B9AVjo3qD9DANUo1TUZHb3k2ODQ
We will be moving it off of Google Drive and over to our server tonight, but if you want to check it out -- there she is. Wink

New Source: https://github.com/CleanWaterCoin/cleanwatercoin
• DNS Seed connections enabled
• IRC Connections disabled
• Added "posmint" configuration directive to enable/disable PoS miner
• Corrected syntax errors

Here is the original link for anyone else not sure - Zach/Mindfox can you update the front page links please to avoid any more confusion.

Do you have an ETA for the latest new-look wallet version? And for Bittrex to enable WATER again? It has been another week now since your last update.

ktmracing03

full member

Activity: 148

Merit: 100

Quote from: YouIsPeng on August 07, 2014, 12:30:13 PM

Quote from: ktmracing03 on August 07, 2014, 12:25:39 PM

Quote from: YouIsPeng on August 07, 2014, 12:23:04 PM

Quote from: ktmracing03 on August 07, 2014, 12:02:42 PM

Quote from: YouIsPeng on August 06, 2014, 08:21:05 PM

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

I tried that and all my coins are back and was synced for a couple of minutes now it says WARNING:Invalid checkpoint found! ....... went to console and typed checkwallet and all I get is a red message saying "Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers. (code -2)" same result with the repair wallet command.
any ideas?
I am using wallet v1.7.0.1

I'm glad your coins are back, your wallet seems to be repaired - good news!

To get rid of the invalid checkpoint warning try re-downloading the blockchain with no .conf file - my wallet is updating fine without having to add any nodes manually.

I dont have a .conf file in the folder. I didn't add it back after following your steps earlier.

I just realised you're using an old wallet - download the latest version (v1.7.0.2) here: https://drive.google.com/file/d/0B9AVjo3qD9DANUo1TUZHb3k2ODQ

If it doesn't work straight away, delete and re-download the blockchain (I always do that without my wallet in the roaming folder) then shut it down, replace your wallet and reload. I think there were some changes made in version 1.7.0.2 to avoid the checkpoint errors.

When did 1.7.0.2 come out? This is the first I have heard of it and the OP still has .1 on it. Ill give that a shot....waiting for new block chain to re download. Hope it works this time.

thanks for the help thus far.

YouIsPeng

full member

Activity: 175

Merit: 100

Quote from: ktmracing03 on August 07, 2014, 12:25:39 PM

Quote from: YouIsPeng on August 07, 2014, 12:23:04 PM

Quote from: ktmracing03 on August 07, 2014, 12:02:42 PM

Quote from: YouIsPeng on August 06, 2014, 08:21:05 PM

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

I tried that and all my coins are back and was synced for a couple of minutes now it says WARNING:Invalid checkpoint found! ....... went to console and typed checkwallet and all I get is a red message saying "Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers. (code -2)" same result with the repair wallet command.
any ideas?
I am using wallet v1.7.0.1

I'm glad your coins are back, your wallet seems to be repaired - good news!

To get rid of the invalid checkpoint warning try re-downloading the blockchain with no .conf file - my wallet is updating fine without having to add any nodes manually.

I dont have a .conf file in the folder. I didn't add it back after following your steps earlier.

I just realised you're using an old wallet - download the latest version (v1.7.0.2) here: https://drive.google.com/file/d/0B9AVjo3qD9DANUo1TUZHb3k2ODQ

If it doesn't work straight away, delete and re-download the blockchain (I always do that without my wallet in the roaming folder) then shut it down, replace your wallet and reload. I think there were some changes made in version 1.7.0.2 to avoid the checkpoint errors.

ktmracing03

full member

Activity: 148

Merit: 100

Quote from: YouIsPeng on August 07, 2014, 12:23:04 PM

Quote from: ktmracing03 on August 07, 2014, 12:02:42 PM

Quote from: YouIsPeng on August 06, 2014, 08:21:05 PM

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

I tried that and all my coins are back and was synced for a couple of minutes now it says WARNING:Invalid checkpoint found! ....... went to console and typed checkwallet and all I get is a red message saying "Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers. (code -2)" same result with the repair wallet command.
any ideas?
I am using wallet v1.7.0.1

I'm glad your coins are back, your wallet seems to be repaired - good news!

To get rid of the invalid checkpoint warning try re-downloading the blockchain with no .conf file - my wallet is updating fine without having to add any nodes manually.

I dont have a .conf file in the folder. I didn't add it back after following your steps earlier.

YouIsPeng

full member

Activity: 175

Merit: 100

Quote from: ktmracing03 on August 07, 2014, 12:02:42 PM

Quote from: YouIsPeng on August 06, 2014, 08:21:05 PM

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

I tried that and all my coins are back and was synced for a couple of minutes now it says WARNING:Invalid checkpoint found! ....... went to console and typed checkwallet and all I get is a red message saying "Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers. (code -2)" same result with the repair wallet command.
any ideas?
I am using wallet v1.7.0.1

I'm glad your coins are back, your wallet seems to be repaired - good news!

To get rid of the invalid checkpoint warning try re-downloading the blockchain with no .conf file - my wallet is updating fine without having to add any nodes manually.

ktmracing03

full member

Activity: 148

Merit: 100

Quote from: YouIsPeng on August 06, 2014, 08:21:05 PM

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

I tried that and all my coins are back and was synced for a couple of minutes now it says WARNING:Invalid checkpoint found! ....... went to console and typed checkwallet and all I get is a red message saying "Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers. (code -2)" same result with the repair wallet command.
any ideas?
I am using wallet v1.7.0.1

YouIsPeng

full member

Activity: 175

Merit: 100

Quote from: ktmracing03 on August 06, 2014, 12:05:06 PM

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

Make sure you let the blockchain fully download from scratch before you replace your wallet in the roaming folder.

After you put your wallet back, go to the debug console (Help->Debug Window->Console) then type "checkwallet" and it will tell you if there are any mismatched coins compared with the blockchain.

If it does not say "true" then type "repairwallet" and this should retrieve any coins not showing. If it doesn't then it is likely they were mined on an incorrect fork.

TheLittleDuke

legendary

Activity: 1024

Merit: 1004

Quote from: IMJim on August 05, 2014, 05:40:55 PM

NM on my previous question......re downloaded blockchain and all is good again:-)

Ditto for the doabitofgood.com public facing peering node

ktmracing03

full member

Activity: 148

Merit: 100

question....my wallet also wont sync and if i remove my wallet.dat and conf file and delete the cleanwatercoin folder in raoming then reopen wallet to recreate the folder and then re add my conf and wallet file I have 1600 coins vs the several hundred thousand I have mined. Any ideas? Am I out my coins? Super confused and never had this issue before with any other wallet.
thanks

IMJim

legendary

Activity: 1260

Merit: 1000

NM on my previous question......re downloaded blockchain and all is good again:-)

IMJim

legendary

Activity: 1260

Merit: 1000

I haven't been able to sync my wallet so I can stake for a week or two now. Is there something I can do to get my wallet staking or do we just have to wait for the updated to come out? Don't have a config file with any addnodes either, if there are some to share?

Thanks!

irbbq

newbie

Activity: 34

Merit: 0

Hopefully they will dump into my buy orders then, because it will bounce back for sure. No doubt the miners will dump, but with the increased volume and attention I don't think it'll stay low for long.

Looking forward to the new wallet, keep the updates coming!

alterra

newbie

Activity: 26

Merit: 0

dump time comin'

DreamMiner

newbie

Activity: 32

Merit: 0

Me too yesterday "WARNING: Invalid checkpoint found!"

All part of the issue they are fixing with the new wallet.

Sometime have backup your wallet.dat start fresh chain then copy dat over... works for me...
I am in sync with the block explorer on two of my wallets.
Fingers crossed new wallet is out soon.

welyoe

full member

Activity: 148

Merit: 100

waiting for the new design and live again on bittrex Grin

bitminton

member

Activity: 116

Merit: 10

Error message at cleanwatercoin pool:

Fatal error: Uncaught exception 'Exception' with message 'RPC call did not return 200: HTTP error: 500 - JSON Response: [-2] Safe mode: WARNING: Invalid checkpoint found! Displayed transactions may not be correct! You may need to upgrade, or notify developers.' in /var/www/cleanwatercoin/php-mpos/public/include/lib/jsonRPCClient.php:117 Stack trace: #0 /var/www/cleanwatercoin/php-mpos/public/include/pages/statistics/pool.inc.php(9): jsonRPCClient->__call('getblockhash', Array) #1 /var/www/cleanwatercoin/php-mpos/public/include/pages/statistics/pool.inc.php(9): BitcoinWrapper->getblockhash(120336) #2 /var/www/cleanwatercoin/php-mpos/public/index.php(159): require_once('/var/www/cleanw...') #3 {main} thrown in /var/www/cleanwatercoin/php-mpos/public/include/lib/jsonRPCClient.php on line 117

Wallet shows the same message... did not sync after reloading.

DreamMiner

newbie

Activity: 32

Merit: 0

Are you going to give 5 days of POW on the new wallet before going to POS?

CleanWaterCoin

full member

Activity: 196

Merit: 100

Quote from: smart15 on August 01, 2014, 06:18:27 AM

So, any live exchanges now?

Bittrex will re-enable the wallet as soon as we give them the latest -- just need to wrap up the design Wink

smart15

full member

Activity: 170

Merit: 100

So, any live exchanges now?

CleanWaterCoin

full member

Activity: 196

Merit: 100

Quote from: portdavenport on August 01, 2014, 01:19:59 AM

Clean Water Coin ("WATER") is still disabled on http://bittrex.com

That is intentional, for security purposes. Read back a couple pages for some more context Wink

Topic: [Donated $2k+ To Charity] Clean Water Coin: A Crypto Charity (Pure PoS) - page 16. (Read 195747 times)