And I wanna ask, for the 8 chip board, what power supply and cooling do we need for it? And how does this connect? Compare to the USB thumb drive
Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 141. (Read 273558 times)
August 15, 2013, 07:45:39 PM
Have you figure out it yet?
And I wanna ask, for the 8 chip board, what power supply and cooling do we need for it? And how does this connect? Compare to the USB thumb drive
And I wanna ask, for the 8 chip board, what power supply and cooling do we need for it? And how does this connect? Compare to the USB thumb drive
August 15, 2013, 07:24:01 PM
Was considering investing into a one of those USB Drillbit systems.. Went to use your website.. NOPE.
You guys need a hand with web design..? Your site just costed you a sale.. And my guess would be more then just i was turned off by the 20 second to build site. :/
I love the idea of the product.. Just highly doubting legitimacy.
You guys need a hand with web design..? Your site just costed you a sale.. And my guess would be more then just i was turned off by the 20 second to build site. :/
I love the idea of the product.. Just highly doubting legitimacy.
August 15, 2013, 07:13:51 PM
do we have to run the drillbtit overclocked or can they run at stock speed to save heat/electric cost?
August 15, 2013, 01:01:08 PM
Any rough specs on the the larger 8 chip boards? I think I like to have a couple in my mining "cupboard"
Thanks
Thanks
August 15, 2013, 11:09:29 AM
Ok I just purchased 4 fully assemebled boards. Looking forward to this.
August 15, 2013, 03:08:10 AM
I have been in contact with Barntech and will be visiting as soon as there is something to see & photograph.
This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
I was just going to suggest something like that. After all the scams and such, it helps both parties involved:
- The fabs are seen as legit and get more business.
- The buyers (us) feel more comfy and order.
The verification of ID here by a member is a great first step, but it is just ID and we are talking tens, hundreds and sometimes millions of dollars.
I mean, think about it, if a person has a business and advertises, often there is an address, picture of the owner, diplomas/certs., etc. The more information the more trust.
I'm not saying this against or for anyone, just mentioning it here as I'm thinking about this GB. Again, it benefits everyone involved.
Thx,
IAS
Julz is going to come visit us once we have a prototype to show off. I also extend the invite to anyone else in the Sydney area who wants to come by and say hello / check out what were up to.
Barntech
Great news Barntech, I noticed the post up there. This will attract more people. Benefits everyone.
Good luck!
August 15, 2013, 02:34:17 AM
I've just ordered 3 thumbs (6gh/s?) via paypal.
really looking forward to this.
Thanks
really looking forward to this.
Thanks
August 14, 2013, 09:10:52 PM
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.com
Cheers.
considering buying a few 8 chip miners is the tentative date these will start shipping october?
Yes. Late October, early November is our anticipated delivery time.
August 14, 2013, 08:34:54 PM
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.com
Cheers.
considering buying a few 8 chip miners is the tentative date these will start shipping october?
August 14, 2013, 07:52:53 PM
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
So...99 usd is only for one chip USB while 300 is for 8 chip assembled board?
Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.com
Cheers.
August 14, 2013, 07:43:03 PM
Hey there, Really interest in the drillbit thumbs. Are they similar to the asicminer units but with bitfury chips? Would my current set up of a 10 port usb powered hub and small fan be ok to use?
Also, Just looked at the paypal buy page and there doesn`t seem to be a selection for the thumbs..
Thanks guys, this project looks awesome...
Also, Just looked at the paypal buy page and there doesn`t seem to be a selection for the thumbs..
Thanks guys, this project looks awesome...
Yes,
The Drillbit Thumbs are just like the Block Erupter USBs but with a Bitfury chip at ~2Gh/s. Yes your current hub will run them if it happily runs the ASICminer ones.
I have just added a PAYPAL button for the thumbs so feel free to jump on there and order.
Cheers.
Barntech
August 14, 2013, 07:39:32 PM
Maybe you could host a Google hangouts or something like that for those who have bought in? That would be pretty sweet!
Nice idea Lajz. Maybe we will.
August 14, 2013, 07:38:27 PM
I'm talking about pre-orders for October! They used to be listed on the site for anyone to buy and now they are no longer available to PRE-order. One real of chips does not constitute a 'large order' anyway. This is a reasonable question, unless Barntech has some other arrangement made.
I am aware that the reels are no longer on the Megabigpower site. There are changes going on over there that is their information to tell, not mine.
We are looking good for our chips though. I am in communication with Dave from Megabigpower and will be making a deposit soon to lock the reel down. I'll keep you all updated on the progress of this.
Barntech
August 14, 2013, 07:30:48 PM
Quote
8 chip Drillbit Board (including chips) - $300
am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s?
2 X 8 = 16
A basic stable rate of 16 GH/s with potential overclocking up to 21.6 GH/s
Edit: Thanks Philwoo. Beat me to it.
oops miscalculation lol
August 14, 2013, 07:24:01 PM
Maybe you could host a Google hangouts or something like that for those who have bought in? That would be pretty sweet!
August 14, 2013, 07:18:31 PM
I have been in contact with Barntech and will be visiting as soon as there is something to see & photograph.
This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
I was just going to suggest something like that. After all the scams and such, it helps both parties involved:
- The fabs are seen as legit and get more business.
- The buyers (us) feel more comfy and order.
The verification of ID here by a member is a great first step, but it is just ID and we are talking tens, hundreds and sometimes millions of dollars.
I mean, think about it, if a person has a business and advertises, often there is an address, picture of the owner, diplomas/certs., etc. The more information the more trust.
I'm not saying this against or for anyone, just mentioning it here as I'm thinking about this GB. Again, it benefits everyone involved.
Thx,
IAS
Julz is going to come visit us once we have a prototype to show off. I also extend the invite to anyone else in the Sydney area who wants to come by and say hello / check out what were up to.
Barntech
August 14, 2013, 07:14:24 PM
Quote
8 chip Drillbit Board (including chips) - $300
am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s?
2 X 8 = 16
A basic stable rate of 16 GH/s with potential overclocking up to 21.6 GH/s
Edit: Thanks Philwoo. Beat me to it.
August 14, 2013, 07:12:54 PM
Quote
8 chip Drillbit Board (including chips) - $300
am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s?
running at stable speeds the 8 chip system will produce about 16GH/s (2*8=16), however the bitfury chips are able to be over clocked to around 2.7GH/s a chip (2.7*8=21.6GH/s). However when these chips are over clocked they become extremely hot requiring extra cooling, running at these high temperatures also increases error rate and decreases lifespan of the product (due to slight imperfections in the wafers themselves).
August 14, 2013, 06:42:19 PM
Quote
8 chip Drillbit Board (including chips) - $300
am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s?
August 14, 2013, 05:20:14 PM
Erk has a point. Any large order will ALWAYS have a lead time even if they are in stock. And the companies that are carrying BitFury chips won't have them ready to send to the ones coordinating group buys like this one until around early October.
I was thinking of ASICs specifically, you have to order a batch of wafers which take 2mths to manufacture. There is nobody that carries stocks of ASIC chips for sale, the are in too high demand to keep in stock.
Jump to: