Topic: DRILLBIT SYSTEM Miners - Avalon range available - Now $104.99! - page 145. (Read 273816 times)

No need to add GST. 

Yes, basically we will do all we can to make sure the order goes through and the boards get made. If we end up in October and there's still 2000 chips unaccounted for then we'll probably have to look at refunding peoples money, but if its more like 500, we will buy the remaining chips ourselves and get the order through. I do have a feeling that the chips will all get taken though. The Jon K verification is now in so people don't have to be concerned about being scammed any more, and once we have a working prototype and people realise this is really going to happen, i think the chips will go quite quickly.

Barntech

Cheers Laz. Yes i'll always be here to answer any questions anyone might have. Definitely excited to see the orders coming in and really hoping it picks up in the coming weeks. I believe it will. 

Just stumbled across this thread. If I order from Australia do I add GST?

Thank you for that lajz99. I read that message and apparently it did not sink in lol.  Alright time to mine some more so I can afford some chips :3

I like dem aussies. Just placed an order for an 8-chip one. Cheers & good luck!

I am quite interested in a few chips atm. I'm currently coin poor thanks to converting to cash for bills and bitmit auctions lol.  I was wondering if you do not reach the goal what will happen. Will you continue to buy and ship the bitfury's or will you refund our coins?  If i missed the post regarding this please point me in the right direction.

I've gotta say, this is my favorite thread to receive updates on.  Nice work OP, glad you answer the questions presented quickly and address the concerns people raise.  I hope more jump on board soon so we can get these chips ordered!

The Backplane will be somewhere is the region of $80 to $150. Will post more details when i've got them. :-)

Yes the USB port is for connecting to your cgminer host, PC or Raspberry Pi or whatever system you are using.

The power input on the boards is standard 4 pin molex from an ATX power supply. We don't yet have final power requirements for the boards. The 8 chip board is in final design stage, should be finished this week. Once it is done, i will post exact specs. But basically yes, you will be able to run a fully stacked backplane of 16 boards, or multiple 4 stacks, or multiple singles from one ATX power supply.

Now Verifed by John K. https://bitcointalksearch.org/topic/m.2917573

 

This is not very clear for power:

So one board could be powered with drive power connector, IDE or SATA?
Then when stacking sevral boards, it would require ATX power connecter. What about several stackings,  4 PCB is 60W, so can we use a power supply ATX for several "stackings" ? Can I use a standard ATX power suply to connect up to 'x4=16 boards on that? What would be the requirement of such a power supply?

The USB port is for communication with the "master miner" (like cgminer host) only?

PS: I realized that there was a typo in the numbering after I signed it.


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I confirm the receipt of the documents below. Please note that I am not a professional nor trained in verifying documents given, so I cannot guarantee that they're 100% authentic or came from the original owner.

1. Photo of Barntech's Drivers License
3. Photo of Barntech's Passport
4. Photo of Barntech holding a piece of paper with his username

I promise the safe destruction of the data after the successful completion of the group buy. The data received may be divulged for litigation purposes if needed.

Thanks,
John
12 August 2013
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (MingW32)
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=m3iW
-----END PGP SIGNATURE-----

any idea on the backplane system cost for multiple drillbit system?

I have sent my Drivers Licence, Passport and photo of me with my username on a piece of paper to John K. He will be providing verification shortly. I sent it last night, so it will take him as long as it takes from that point. Hope this keeps you happy pajak. :-)

Barntech

Some people might not be aware that you actually were able to order few of these chips directly through bitfurystrikesback shop.
So holding few chips means actually nothing. 3 days has gone and he still didn't got verified by John K. and is not using escrow.

Sounds like a great project, do you have a date when the drill bit thumb drive version will be available to order? Really looking forward to backing this project when the price for it is confirmed.

Hi,

Why don't you use escrow service to bring more trust ?

Cheers

Ideally we have all chips accounted for before the chips become available. I have a feeling that they will start to move quicker as the project moves along and we come closer to the chip availability. At that point, if we still haven't made up the 3000 chips, we will still purchase the chips if we're in a range of left over chips that we can cover. I can't exactly say what that is, but basically if October rolls around and there's still a bunch of chips left over, we'll buy the remaining ones so we can get complete the order. Lets see how interest goes in the next couple weeks.

And thanks for placing your order, good to see that number moving.

Cheers.

Barntech