Hi guys..
I have a pretty big problem.. Last night my windows 10 miner did some kind of stupid graphic drivers update, and my Claymore 9.8 stopped working after that. Anyway, i have removed the drivers with DDU in Safe mode, and afterwards installed the latest Beta (Blockchain drivers).. So everything should be ok, but it is not..
My compter restarts when i start Claymore and when it gets to this point:
https://ibb.co/n0taP5
I have 6 x RX 580 Nitro+ 8GB cards..
Does any1 has an idea what shall i do?
Thank you in advance..
Topic: Ethash DAG epoch RX470/480/570/580 FIX !! - page 5. (Read 151478 times)
I have putted on my rigs 470 and 480 this combination. Ddu remove old drivers in safe mode, control panel add manual drivers and without reboot install afterburner beta version. Fron what i have seen claymore sometimes controles e evrything some not. But in last few days i have noticed that hash fals to 24Mhs after restart everything ok. Is there a fix for that?
Anyone with 470s 4gb rigs have better hashrate with this fix?
Me only have a major consuption and temps
Me only have a major consuption and temps
Of course, the effect is on the whole series of POLARIS.
Anyone with 470s 4gb rigs have better hashrate with this fix?
Me only have a major consuption and temps
Me only have a major consuption and temps
Im using 2xRX580 and 1xRX570 in one RIG with the new driver. Get from RX580 about 30,7Mh/s constantly, the RX570 Nitro+ delivers 29,6Mh/s - with a patched BIOS.
The undervolt process is done by the OverDriveNTool-which works good - so the whole RIG with these 3 RX and a constant rate of 90,8 Mh/s pulls 400 watts at the wall.
Below 850mV the RX5xx will get unstable at MEM 2100 and GPU 1150 Mhz. I think more optimization is not possible with this technology. Let me know if I'm wrong.
The undervolt process is done by the OverDriveNTool-which works good - so the whole RIG with these 3 RX and a constant rate of 90,8 Mh/s pulls 400 watts at the wall.
Below 850mV the RX5xx will get unstable at MEM 2100 and GPU 1150 Mhz. I think more optimization is not possible with this technology. Let me know if I'm wrong.
Got my RX580 undervolted by directly modifying GPU vBios (mV) to 850 below states. set my TDP to 140 directly in BIOS. got GPU-Z showing 110W to all RX 580 8GB (30.89Mhs). running for 28hrs now... hope this helps, and i would like to you guys to check if what i did is safe.
300 - 750 mV
500 - 850 mV
700 - 850 mV
800 - 850 mV
900 - 850 mV
1100 - 850 mV
1200 - 850 mV
1250 - 850 mV
300 - 750 mV
500 - 850 mV
700 - 850 mV
800 - 850 mV
900 - 850 mV
1100 - 850 mV
1200 - 850 mV
1250 - 850 mV
are there any official drivers out yet, or do we have to install the driver here in the first post?
if there are official drivers can someone link them pls?
thanks guys
if there are official drivers can someone link them pls?
thanks guys
Google "amd blockchain driver".
are there any official drivers out yet, or do we have to install the driver here in the first post?
if there are official drivers can someone link them pls?
thanks guys
if there are official drivers can someone link them pls?
thanks guys
I am running the crimson Beta drivers and use MSI AB Beta 16 Version, all fine with full controls on AB.
6 x RX570 Sapphire Nitro + 4gb
Undervolted and overclocked, no BIOS mods as yet but all 6 cards getting just over 25Mhs.
Brand new build a few days ago
6 x RX570 Sapphire Nitro + 4gb
Undervolted and overclocked, no BIOS mods as yet but all 6 cards getting just over 25Mhs.
Brand new build a few days ago
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
I wrote about undervolting in my guide, it's really just basic, but it will give you better power consumption.I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
Except blockchain drivers (both aug11 & aug23) completely bypass the set voltages in the BIOS if you didn't do one simple trick.
And I think i'm the only one that found out that trick yet...
Also @Tuner77 I think i'm your guy
and yes, Trixx works with blockchain drivers and Claymore 9.8.
I am going to use this.
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-polaris-gpus.416116/
This software however miss 1 very important feature.
In claymore I can turn off some card and I will look at wattool to see which card has 0% GPU usage.
With this software it's gonna be much tougher.
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-polaris-gpus.416116/
This software however miss 1 very important feature.
In claymore I can turn off some card and I will look at wattool to see which card has 0% GPU usage.
With this software it's gonna be much tougher.
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
It's confirmed that wattool doesn't work.
What would be the solution?
There is no solution like watttool at moment, anything that is available does not work like watttool sadly.
Will wattool update itself with something that works? I am better off with old driver here.
Try this
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-polaris-gpus.416116/
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
It's confirmed that wattool doesn't work.
What would be the solution?
There is no solution like watttool at moment, anything that is available does not work like watttool sadly.
Will wattool update itself with something that works? I am better off with old driver here.
No, the author is probably dead somewhere. Try this https://forums.guru3d.com/threads/overdriventool-tool-for-amd-polaris-gpus.416116/page-5
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
It's confirmed that wattool doesn't work.
What would be the solution?
There is no solution like watttool at moment, anything that is available does not work like watttool sadly.
Will wattool update itself with something that works? I am better off with old driver here.
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
It's confirmed that wattool doesn't work.
What would be the solution?
There is no solution like watttool at moment, anything that is available sadly does not work like watttool.
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
It's confirmed that wattool doesn't work.
What would be the solution?
Damn this fix helped me get 15 mh/s out of my 6x rx 570 rig. Thanks for posting!
This is common. You can achieve this with fewer parameters.
http://screenshot.ru/upload/images/2017/08/28/BETA1dbd7.jpg
This is 6x480 8Gb runs stable.
http://screenshot.ru/upload/images/2017/08/28/BETA1dbd7.jpg
This is 6x480 8Gb runs stable.
Here's my result x5 rx 480 before, i got only 28.MH but now seems it will bring the life of my rx 480.. Thanks for sharing mate! 
The only problem i have is the high temp of my card even i set it up to 90% fan..
The only problem i have is the high temp of my card even i set it up to 90% fan..
What mods are you running and what cards? Ive never been able to clock that high with rx 480 8gb's
2 XFX hard swaps
1 XFX Ref
1 Powercolor Ref
I think 1750 straps in 2000 slot.
-96mV
2125 mem
1150 core
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
I wrote about undervolting in my guide, it's really just basic, but it will give you better power consumption. I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
Jump to: