Topic: ethminer-0.9.41-genoil-1.1 - page 2. (Read 397377 times)

Hello there.
I started mining eth yesterday.
My Rig is:
i7-4700k(stock, don't see the point to oc)
evga z97 ftw (as I understand the specs, it only has pcie x16 (8x) for one GPU and 4x for 2 GPU)
16gb DDR3 Crucial Ballistics CL11
Sapphire R9 nano (main GPU for mining)
MSI GTX 770 4GB (2nd mining GPU and for gaming)
Samsung 840 Pro
Windows 10 pro 64bit

I have two starting .bat. One for each GPU.
As I read in a few threads, MH/s with the R9 nano differs from 20-35 MH/s. I only get a maximum of 10,5 MH/s.

My start_opencl.bat for the R9 looks like this:

"setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ethminer.exe --farm-recheck 200 -G -S eth-eu1.nanopool.org:9999 -FS eth-eu2.nanopool.org:9999 -O YOUR_ADDRESS/YOUR_WORKER/YOUR_EMAIL"

Is there anything wrong in the batch? I just used the recommended config from nanopool.

On top of the low MH/s for the nano, they aren't even stable. It's just one second at around 10 MH/s and then one or even two seconds at 5 MH/s.

I know that the Gtx 770 isn't a great deal (around 2 MH/s), because of the high energy comsumption, but I am not paying for the electricity used and just wanted to mine as much as I can or use it for gaming and let only the nano mine.
Is it a problem with the bat, is the mainboard the problem with it's pcie or anything else?
I am thankfull for every help.

I'm looking for linux version too (maybe as .sh or something like that).

Btw, the link "https://github.com/Genoil/cpp-ethereum/tree/master/releases" doesnt work anymore.

Is there a .deb file anywhere for this program? Or could some one explain to me how so install it from source? Sorry I am a linux beginner.

i have cuda, opencl , nvidia-384 , linux mint 18.1

i USE
sudo apt-get install libboost-all-dev libleveldb-dev libcurl4-openssl-dev libmicrohttpd-dev libminiupnpc-dev libgmp-dev
and
scripts/install_deps.sh
and it helps with "cmake"
and get 2.0 Gb of trash in cpp-ethminer folder  "build"

i don't know how to run it!!??

where is executable file?

where is miner cfg?

why 2.0GB (!!!?) ?

i tries run  /build/eth  as  ./eth
and get errors and messages, not mining

user@PC1 /media/user/F/Work/Mining/genoil-eth/cpp/cpp-ethereum/build/eth $ ./ethcpp-ethereum, a C++ Ethereum client
cpp-ethereum 1.3.0
  By cpp-ethereum contributors, (c) 2013-2016.
  See the README for contributors and credits.
  ℹ  02:50:33.449|p2p  UPnP device not found.
Node ID: enode://cd50282e0cf480995981a93a3332429094851a26a103656f776b22d4ddbfef6e148568e4f18a5325ffdacdfe4f0a9be8c37b7bb6e3ee1d9bed4ff75640e985@0.0.0.0:0
JSONRPC Admin Session Key: iRJoNj5bk=
!P!  02:50:33.550|p2p  Invalid packet (timestamp in the past) from 52.16.188.185 : 30303
!P!  02:50:34.878|p2p  Invalid packet (timestamp in the past) from 52.16.188.185 : 30303
⧎ ✘  02:50:41.023|p2p|01a79099…|Parity/v1.7.0-beta-5f2cabd-20170727/x86_64-linux-gnu/rustc1.18.0  Error reading - Abrupt peer disconnect: End of file
⧎ ✘  02:50:41.361|p2p|aebe1050…|Parity/v1.6.1

I have Lost my password  in coinotron!!!!

How can i change it??

any link?

I would love to still use these binaries, but I'm wondering if anyone has benchmarked this vs. the latest Claymore on Polaris cards, and checked on the pool for average effective hashrate in each case?
I would switch right now, but I'm still in the middle of testing different memory timings on different cards, and I'd have to put that on hold because a different miner would throw everything off.

Anyone benchmarked this recently?

Cuda - Force P2 State set to Off ? (in Nvidia Profile Inspector)

On my 1080 ti aorus 11 gb getting 32-35 Mhs  with normal clock and mem settings with tdp%  52+

Out of nowhere nano tweak of ASUS R9 380:

I haven't kept up everything GENOIL, but I thought I would share this.

1) I'm still mining with some ASUS R9 380's. At their peak, a 6 card rig in an econo configuration (800/1500) would mine ETH at 125 - 126 Mh/s. This configuration is UBUNTU 15.10, 15.12 drivers and a compiled version of GENOIL 0.9.41-1.1.7

2) I was running CM 9.3 and by chance stumbled on the fact that using the above GENOIL version was actually faster for THIS miner configuration. (Today, CM 9.3 is around 10-15% worse from the peak for the above configuration.) As of today, the identical 6 card rig is hashing away at around 119 - 120 Mh/s. A loss of about 5% from the peak ETH hashing rate till now.

3) The latest linux GENOIL version (0.12) is even slightly faster ( about 0.5%) than 1.1.7

still getting "rejected in ____ms" after I changed it

ethminer.exe -G -S

command -G is for amd you have to put an U

ethminer.exe -U -S

trying to mine with genoil 1.1.6 but ever since I updated to the windows 10 creators update, the miner crashes instantly. worked fine for weeks before this. tried to use 1.1.9 and it starts up, but after connecting to the pool it says "rejected in 2000ms" and then "waiting for work package..." over and over. tried switching between cuda and openCL but nothing.

using:
win 10
latest nvidia driver
gigabyte geforce 1080
20 GB ram

batch file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
ethminer.exe -G -S eu1.ethermine.org:4444 -O 0x34B1dbA2F6A60FFc643EBC438e60Fe9bE9Aba437.stratum

any ideas?

What are the results on RX 570 RX 580 this miner vs Claymore?

i used to get 41mh on my two 480 now im getting 21-33mh from yesterday what happened? cards have 4gb ram but dag size is barely over 2gb

I made basic monitoring support for EthMiner https://github.com/JamesSmith2/ethminer/releases (Supports monitoring from https://ethmonitoring.com)

 Not Genoil's project, though he seems to have forked HIS miner from ethminer WAY BACK WHEN.

 I don't think that project is supported any more.

Guys, how to set up a miner for cards RX480 8 Gb?
I do not understand how to write a batnik for a specific pool.

Very good miner. On 8x 1070 i get around 245 MH/s and one test rig with one 1060 = 23 - 25 MH/s.
1070 Limit TDP = 130W
1060=110W
Both overclocked.

Will be implemented some kind of report or local webserver like JSON report? What is missing is temperatures , MHs/s, invalid shares, stale shares.... Using Linux Mint.

can you add support ethminer (https://github.com/ethereum-mining/ethminer/releases)
Very nice miner but without any monytoring.

https://github.com/Genoil/cpp-ethereum/tree/110/releases