Topic: ethminer-0.9.41-genoil-1.1 - page 4. (Read 397326 times)
I'd like to give it a go but it doesnt pick up my two 1060's only rhe intel onboard graphics (primary as the hdmi port is being used so using the vga on the mobo).
More or less a tossup, but Genoil miner doesn't charge a fee.
For mining Eth only, ethminer is doing better than Claymore or not? ( with AMD RX5xx GPU).
Thanks
Thanks
anyone can help me?
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
You must update win10 to The Windows 10 Creators Update
Thanks, it works
anyone can help me?
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
You must update win10 to The Windows 10 Creators Update
I have a unstable Hashrate
why i have about 5% stale shares on Ethermine.org?
why i have about 5% stale shares on Ethermine.org?
The pool estimates your hashrate based on the shares your miner finds - variation like you are seeing is NORMAL and nothing to worry about.
The "orange" line is a long-term average, it can take 24 hours for it to achieve a stable value.
20 Mh/s is a LITTLE low for a RX 480, but for the 4GB RAM version with no BIOD mod it's not completely out of line depending on how much you can overclock the RAM.
The "stales" count is a bit on the high side, you might have some lag issues with your internet connection somewhere between your rig and ethermine.org.
anyone can help me?
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
You must update win10 to The Windows 10 Creators Update
anyone can help me?
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
i only get 7 Mhz, with zotac gtx 1060 3 gb
Windows 10
Cuda 8
Latest NVidia Driver
Hi guys, there is a way to reboot windows when ethminer get cuda error and it remain blocked? I mean there is a way tk reboot windows when the pc stop mining? Thanks
Not sure if there's a need to reboot windows, but only the miner.... when Claymore crashes, for example, the miner restarts by itself and all good.I am seeing this miner to crash and it unfortunately does not restart... if I could ask Genoil to add a feature to this miner, that would be it.
Thanks
Yes you are right.
I ask that to genoil too
Hi guys, there is a way to reboot windows when ethminer get cuda error and it remain blocked? I mean there is a way tk reboot windows when the pc stop mining? Thanks
Not sure if there's a need to reboot windows, but only the miner.... when Claymore crashes, for example, the miner restarts by itself and all good.I am seeing this miner to crash and it unfortunately does not restart... if I could ask Genoil to add a feature to this miner, that would be it.
Thanks
Hi guys, there is a way to reboot windows when ethminer get cuda error and it remain blocked? I mean there is a way tk reboot windows when the pc stop mining? Thanks
[/quote]
Give this download a try:
http://cryptomining-blog.com/wp-content/download/ethminer-0.11.0rc1-windows.zip
[/quote]
Same problem for me
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
23:09:24|main Getting work package...
23:09:24|main Failed to submit hashrate.
23:09:24|main Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32603 : INTERNAL_ERROR: : {"id":999,"jsonrpc": "2.0","result": false,"error": "Invalid JSON request"}
Help please ^^
I dont know how to get this rocking with sexy.pool im using the nvidia optimized version as per bitsbetrippin on youtube, any help how to lock in the bat file would be appreciated
Check the help text for optimised CUDA version, you gotta have to specify the stratum number in a bat file, the default might not work.
There wasn't a help txt file in the version I downloaded, went to GitHub, no help txt option either for nvidia
Give this download a try:
http://cryptomining-blog.com/wp-content/download/ethminer-0.11.0rc1-windows.zip
I dont know how to get this rocking with sexy.pool im using the nvidia optimized version as per bitsbetrippin on youtube, any help how to lock in the bat file would be appreciated
Check the help text for optimised CUDA version, you gotta have to specify the stratum number in a bat file, the default might not work.
There wasn't a help txt file in the version I downloaded, went to GitHub, no help txt option either for nvidia
Hi gentlemen. I'm new at this. I downloaded the version ethminer-0.9.41-genoil-1.1.6-pre and used the "Ethermine-Stratum-OpenCL" instead of the ethminer.exe cause that one does not do the job, but I could't put my address or wallet anywhere so how I would got paid I asked, so I downloaded minergate_genoil-...bat and wrote this (
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O my.minersgate's.address
) runned it and use the Ethermine-Stratum-OpenCL instead of the ethminer.exe again. I am doing everything wrong? There is a change to put my wallet and get minergate out of the way? Thanks
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O my.minersgate's.address
) runned it and use the Ethermine-Stratum-OpenCL instead of the ethminer.exe again. I am doing everything wrong? There is a change to put my wallet and get minergate out of the way? Thanks
@echo off
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 2000 -U -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O yourwallet.workname
If you use amd use -G instead of -U
But is very slow with amd.
With 1060 i saw my hashrate by 132/138 mh with 6x 1060 to 150mh very good work
I dont know how to get this rocking with sexy.pool im using the nvidia optimized version as per bitsbetrippin on youtube, any help how to lock in the bat file would be appreciated
Check the help text for optimised CUDA version, you gotta have to specify the stratum number in a bat file, the default might not work.
I dont know how to get this rocking with sexy.pool im using the nvidia optimized version as per bitsbetrippin on youtube, any help how to lock in the bat file would be appreciated
Trying compile on UBUNtu 16.04:
Got the compiled file.
Run:
This was compile with cmake -DBUNDLE=cudaminer .. WHY no work?
Code:
~$ git clone https://github.com/Genoil/cpp-ethereum.git
Cloning into 'cpp-ethereum'...
remote: Counting objects: 71874, done.
remote: Compressing objects: 100% (260/260), done.
remote: Total 71874 (delta 361), reused 484 (delta 317), pack-reused 71296
Receiving objects: 100% (71874/71874), 62.59 MiB | 250.00 KiB/s, done.
Resolving deltas: 100% (51336/51336), done.
Checking connectivity... done.
r@r-System-Product-Name:~$ cd cpp-ethereum
r@r-System-Product-Name:~/cpp-ethereum$ mkdir build
r@r-System-Product-Name:~/cpp-ethereum$ cd build
r@r-System-Product-Name:~/cpp-ethereum/build$ cmake -DBUNDLE=cudaminer ..
Got the compiled file.
Run:
Code:
:~/cpp-ethereum/build/ethminer$ ./ethminer -F http://etc-eu.pool.sexy:8888 -O 0xbc5878e2deda131833d1021e97d6e2c1ef23a991.wes -U --farm-recheck 200
Selected CUDA mining without having compiled with -DETHASHCUDA=1 or -DBUNDLE=cudaminer
r@r-System-Product-Name:~/cpp-ethereum/build/ethminer$
This was compile with cmake -DBUNDLE=cudaminer .. WHY no work?
Hi gentlemen. I'm new at this. I downloaded the version ethminer-0.9.41-genoil-1.1.6-pre and used the "Ethermine-Stratum-OpenCL" instead of the ethminer.exe cause that one does not do the job, but I could't put my address or wallet anywhere so how I would got paid I asked, so I downloaded minergate_genoil-...bat and wrote this (
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O my.minersgate's.address
) runned it and use the Ethermine-Stratum-OpenCL instead of the ethminer.exe again. I am doing everything wrong? There is a change to put my wallet and get minergate out of the way? Thanks
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O my.minersgate's.address
) runned it and use the Ethermine-Stratum-OpenCL instead of the ethminer.exe again. I am doing everything wrong? There is a change to put my wallet and get minergate out of the way? Thanks
I'm in the middle of reorganizing things. Master branch is now up to date with Pavel Bylica's work and David Li speedup. Releases are still there under 117 branch. Apologies for the mess, didnt know people still used the binaries.
Nice to hear that you are back with this soft Genoil 
I would like to ask if someone could get ethminer work with http://etcpool.pl/
http://79.98.144.27/#/help command don't want to work with nVidia Gtx
Jump to: