Topic: ethminer-0.9.41-genoil-1.1 - page 3. (Read 397377 times)
Could you please check the RELEASE folder? I am getting 404 page not found error. Thanks!
Step 4 : Turn all PCIe slots to Gen1
What the heck type of motherboards are you using that allow you to set that?
Never seen that as an option on anything I've ever used.
I thought everyone knew where to find the various PCIe gen settings so why bother explaining how to get to each and turn them one by one
You seem to be ASSUMING that these settings are the same on every motherboard - and that they EXIST on every motherboard.
They do, on the motherboard that the OP is asking about atleast. And he did get what I meant. I don't know what rattled your cage though ...
Step 4 : Turn all PCIe slots to Gen1
What the heck type of motherboards are you using that allow you to set that?
Never seen that as an option on anything I've ever used.
I thought everyone knew where to find the various PCIe gen settings so why bother explaining how to get to each and turn them one by one
You seem to be ASSUMING that these settings are the same on every motherboard - and that they EXIST on every motherboard.
Step 4 : Turn all PCIe slots to Gen1
What the heck type of motherboards are you using that allow you to set that?
Never seen that as an option on anything I've ever used.
I thought everyone knew where to find the various PCIe gen settings so why bother explaining how to get to each and turn them one by one
Step 4 : Turn all PCIe slots to Gen1
What the heck type of motherboards are you using that allow you to set that?
Never seen that as an option on anything I've ever used.
....
I downloaded it and as soon I stared it it said "thank you for updating to the latest version of Windows 10" - I have win 10 pro 1703 version 15063.413 OS build and it's same issue
I downloaded it and as soon I stared it it said "thank you for updating to the latest version of Windows 10" - I have win 10 pro 1703 version 15063.413 OS build and it's same issue
I didn't see all your post but did you install windows in uefi mode?
https://blogs.technet.microsoft.com/home_is_where_i_lay_my_head/2012/10/02/how-to-check-in-windows-if-you-are-using-uefi/
yes I did. Basically claymore works fine, genoil works fine up to 4 cards, managed to let genoil run also on 7 cards, I waited through lag on start. It took like 5 minutes to initialize miner and generate dag files, dag files go fast though, but other stuff is super slow and CPU usage is 100%, ethminer using over 70%.
After initialization was done miner worked normaly but crashed after 1 hour on low clocks, seemed unstable.
I'll test for now newest claymore, I heard it improved hashrates, so maybe it can beat genoil even with devfee. My last test would be genoil on Ubuntu. Maybe there it will work nice.
I use genoil on 2 of my home pcs as I w8 for risers, where I use only 2 gpus per motherboard, I run win 10 and genoil and I have effective hashrate on my pool around 60-62MHs even if miner shows 58 and it's on low power. And effective hashrate is everything, it declares how much you farm. And this 60-62mh/s effective average is over few days, while claymore on my rigs always was around 2-6MHs less then my reported hashrate and in general lower then genoils rigs.
On claymore my avg per card is like 28.5-29 and on genoil 30-31.
....
I downloaded it and as soon I stared it it said "thank you for updating to the latest version of Windows 10" - I have win 10 pro 1703 version 15063.413 OS build and it's same issue
I downloaded it and as soon I stared it it said "thank you for updating to the latest version of Windows 10" - I have win 10 pro 1703 version 15063.413 OS build and it's same issue
I didn't see all your post but did you install windows in uefi mode?
https://blogs.technet.microsoft.com/home_is_where_i_lay_my_head/2012/10/02/how-to-check-in-windows-if-you-are-using-uefi/
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
4G encoding enable in BIOS + https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update - update wind 10 pro
(you need click "If you want to install the update now, go to the Microsoft software download website, and select Update now." and then update - takes some time. then try once again ethminer)
+ newest drivers 384,76 + add virt memory = problem solved
I downloaded it and as soon I stared it it said "thank you for updating to the latest version of Windows 10" - I have win 10 pro 1703 version 15063.413 OS build and it's same issue
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
4G encoding enable in BIOS + https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update - update wind 10 pro
(you need click "If you want to install the update now, go to the Microsoft software download website, and select Update now." and then update - takes some time. then try once again ethminer)
+ newest drivers 384,76 + add virt memory = problem solved
Will try it out. Thank you a lot!
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
4G encoding enable in BIOS + https://support.microsoft.com/en-us/instantanswers/d4efb316-79f0-1aa1-9ef3-dcada78f3fa0/get-the-windows-10-creators-update - update wind 10 pro
(you need click "If you want to install the update now, go to the Microsoft software download website, and select Update now." and then update - takes some time. then try once again ethminer)
+ newest drivers 384,76 + add virt memory = problem solved
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
All these are BIOS Settings that work for me on 10+ boards flawlessly :
Step 1 : Update bios to the latest
Step 2: Disable Audio, Disable USB 3.1, Disable all USB ports except the first 4, Disable all sata ports except the one that your SSD is connected to, disable serial port
Step 3 : Set default display to onboard/igfx, enable 4g decoding
Step 4 : Turn all PCIe slots to Gen1
Step 5 : Reboot and run with all cards connected, let the cards intall for a bit, check in device manager when they are all done, then reboot system and voila
If you use a m.2 to pcie converter, you can get even 8 cards to work with the above settings. PM me if you still cant get it to work.
Address for Donation : 0x3e0a7e2c711af522cc9147816569fb7f0415bb19
I will try it as soon as I get home. I tested a lot of things with bios but had probs.
Maybe its my binary for genoil also or something. I'll pm you as soon as I try it
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
All these are BIOS Settings that work for me on 10+ boards flawlessly :
Step 1 : Update bios to the latest
Step 2: Disable Audio, Disable USB 3.1, Disable all USB ports except the first 4, Disable all sata ports except the one that your SSD is connected to, disable serial port
Step 3 : Set default display to onboard/igfx, enable 4g decoding
Step 4 : Turn all PCIe slots to Gen1
Step 5 : Reboot and run with all cards connected, let the cards intall for a bit, check in device manager when they are all done, then reboot system and voila
If you use a m.2 to pcie converter, you can get even 8 cards to work with the above settings. PM me if you still cant get it to work.
Address for Donation : 0x3e0a7e2c711af522cc9147816569fb7f0415bb19
Try setting your machine up with more virtual memory?
I did. I added 16GB of virtual memory.
It works normal with 4 cards and when 4G Encoding is disabled, when I enable it it becojmne super slow.
Claymore works ok but ehhh
If someone can help me to get genoil work on my Asus Rog Strix Z270f Gaming motherboard and 7xGtx 1070 I promise i'll donate him 0.3 Eth.
I am on Win 10 Pro
Try setting your machine up with more virtual memory?
Looking for a link to latest version of Windows binaries.
Same here to try it out
BTW!!
Guys! I have 1 issue. I have everything installed and all is working but have problem when i start Genoils miner. I use 7x gtx 1070 and when command promt start to mine its SUPER LAGY! It starts mining after some time but then crashes. CPU utilisation is 100% and everything lags..
I use win 10 pro. Is there workaround
( i really pefer genoils over claymore but cant fix this. Dont want to be forced to use claymore. Plz help!
Looking for a link to latest version of Windows binaries.
i try to explain the problem as detailed as possible even if English isn't my first language:
I have a mix Rig with Nvidia + Amd Cards:
4x GTX 1070
2x HD 7950
1x R9 270x
i tried to run the miner with all cards on opencl launch parameter:
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 0
with this command the program only selects the 4 1070s and if i do
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 2
i get all my Amd Cards. Is there any command to select all cards to run in opencl ?
I have a mix Rig with Nvidia + Amd Cards:
4x GTX 1070
2x HD 7950
1x R9 270x
i tried to run the miner with all cards on opencl launch parameter:
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 0
with this command the program only selects the 4 1070s and if i do
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 2
i get all my Amd Cards. Is there any command to select all cards to run in opencl ?
Run 2 instances, one for each platform.
LATE versions of Genoil work on NVidia in open-cl, but I'm not sure if it runs as fast as native CUDA mode.
Testing an RX480 with this miner.
I use an MSI RX 480 Gaming X 8GB. I noticed an strange issue: I always get 22.5 - 23.5 MH/s reports whatever I set for the gpu and ram frequencies.
Every clock is stable I set (gpu-z shows me rock solid graph):
1303/2000 --> ~23 MH/s
1350/2200 --> ~23 MH/s
Claymore gives me rather RAM sensitive results, with GPU I can go down to even 1200 MHz with no decrease in hash reates.
I use an MSI RX 480 Gaming X 8GB. I noticed an strange issue: I always get 22.5 - 23.5 MH/s reports whatever I set for the gpu and ram frequencies.
Every clock is stable I set (gpu-z shows me rock solid graph):
1303/2000 --> ~23 MH/s
1350/2200 --> ~23 MH/s
Claymore gives me rather RAM sensitive results, with GPU I can go down to even 1200 MHz with no decrease in hash reates.
I dont know how to get this rocking with sexy.pool im using the nvidia optimized version as per bitsbetrippin on youtube, any help how to lock in the bat file would be appreciated
Check the help text for optimised CUDA version, you gotta have to specify the stratum number in a bat file, the default might not work.
There wasn't a help txt file in the version I downloaded, went to GitHub, no help txt option either for nvidia
Give this download a try:
http://cryptomining-blog.com/wp-content/download/ethminer-0.11.0rc1-windows.zip
I have been running this version for a while now, but I've noticed that the effective hashrate is lower than with claymore despite this miner reporting a higher hashrate. Anyone else notice this?
i try to explain the problem as detailed as possible even if English isn't my first language:
I have a mix Rig with Nvidia + Amd Cards:
4x GTX 1070
2x HD 7950
1x R9 270x
i tried to run the miner with all cards on opencl launch parameter:
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 0
with this command the program only selects the 4 1070s and if i do
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 2
i get all my Amd Cards. Is there any command to select all cards to run in opencl ?
JCK
PS: with --opencl-platform 1 i get my Intel Graphic HD.
and with -X i get 0 mh/s.
I have a mix Rig with Nvidia + Amd Cards:
4x GTX 1070
2x HD 7950
1x R9 270x
i tried to run the miner with all cards on opencl launch parameter:
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 0
with this command the program only selects the 4 1070s and if i do
ethminer.exe -F http://******:7777/*******/GTX*** -G --opencl-platform 2
i get all my Amd Cards. Is there any command to select all cards to run in opencl ?
JCK
PS: with --opencl-platform 1 i get my Intel Graphic HD.
and with -X i get 0 mh/s.
Jump to: