ethminer-0.9.41-genoil-1.1 - page 63.

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: restless on May 17, 2016, 08:23:46 AM

I have no idea how is memory reserved, but what if on start miner attempt to reserve bigger buffer than needed for current DAG, say, big enough for (current epoch + 2)?

That's how Claymore's works. I have to assess the problem first to see if the problem even lies there. Judging by the fact that CUDA cards don't seem to crash (mine alos doesn't), it probably is an OpenCL related bug.

restless

legendary

Activity: 1151

Merit: 1001

I have no idea how is memory reserved, but what if on start miner attempt to reserve bigger buffer than needed for current DAG, say, big enough for (current epoch + 2)?

dodther

newbie

Activity: 18

Merit: 0

Quote from: Genoil on May 17, 2016, 03:37:35 AM

Quote from: Ayers on May 17, 2016, 02:48:55 AM

affecting only amd i guess, maybe only low memory card, 2-3gb? because my 970 work flawless after the dag change

Did this happen while mining and then after a restart it ran again? In this case I will have to build me some fake DAG switching code to finally put and end to these reports Grin

Or, does the miner not work any longer alltogether after restarting it? In that case could you specify the GPU type(s)?

Restarting the miner makes it work again.

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: adaseb on May 17, 2016, 03:55:14 AM

Quote from: Genoil on May 17, 2016, 03:37:35 AM

Quote from: Ayers on May 17, 2016, 02:48:55 AM

affecting only amd i guess, maybe only low memory card, 2-3gb? because my 970 work flawless after the dag change

Did this happen while mining and then after a restart it ran again? In this case I will have to build me some fake DAG switching code to finally put and end to these reports Grin

Or, does the miner not work any longer alltogether after restarting it? In that case could you specify the GPU type(s)?

Restarting the miner makes it work again, or closing the miner before the DAG change block. But if you leave it running, the AMD cards crash.

thanks. on top of the list for 1.0.9!

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: Genoil on May 17, 2016, 03:37:35 AM

Quote from: Ayers on May 17, 2016, 02:48:55 AM

affecting only amd i guess, maybe only low memory card, 2-3gb? because my 970 work flawless after the dag change

Did this happen while mining and then after a restart it ran again? In this case I will have to build me some fake DAG switching code to finally put and end to these reports Grin

Or, does the miner not work any longer alltogether after restarting it? In that case could you specify the GPU type(s)?

Restarting the miner makes it work again, or closing the miner before the DAG change block. But if you leave it running, the AMD cards crash.

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: Ayers on May 17, 2016, 02:48:55 AM

affecting only amd i guess, maybe only low memory card, 2-3gb? because my 970 work flawless after the dag change

Did this happen while mining and then after a restart it ran again? In this case I will have to build me some fake DAG switching code to finally put and end to these reports Grin

Or, does the miner not work any longer alltogether after restarting it? In that case could you specify the GPU type(s)?

Ayers

legendary

Activity: 2590

Merit: 1022

Leading Crypto Sports Betting & Casino Platform

affecting only amd i guess, maybe only low memory card, 2-3gb? because my 970 work flawless after the dag change

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: dodther on May 16, 2016, 09:37:04 PM

Miner freze after DAG change.

Win7x64, genoil-1.0.8

yeah i got that problem also. Looking for a fix

dodther

newbie

Activity: 18

Merit: 0

Miner freze after DAG change.
http://s017.radikal.ru/i419/1605/02/8580152c40de.png

Win7x64, genoil-1.0.8

smaxz

sr. member

Activity: 430

Merit: 253

VeganAcademy

why does pool mining generate additional DAG's after the initial one is created?

i have noticed nicehash does not use this additional dag for their purposes.

would there be any reason for another dag to be created while solo mining with geth?

Slydrule

full member

Activity: 185

Merit: 100

Quote from: malekbaba on May 16, 2016, 02:09:41 PM

Please answer me if any one knows, which driver works best for AMD cards, should I install newest version of the driver ?

Do not install the 16.x versions of the drivers. They will reduce your hash rate. I have used 15.12 and 15.7 install packages for AMD and both provide the same top hash rate.

malekbaba

legendary

Activity: 1526

Merit: 1026

SellDefi.com | Earn by selling files

Please answer me if any one knows, which driver works best for AMD cards, should I install newest version of the driver ?

clintar2

full member

Activity: 202

Merit: 104

Quote from: Genoil on May 15, 2016, 12:08:38 PM

Quote from: davembg on May 15, 2016, 11:44:37 AM

Quote from: Genoil on May 13, 2016, 07:14:55 PM

Quote from: adamvp on May 13, 2016, 07:07:29 PM

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

no it doesn't. my fork doesn't support dwarf stratum. a. their stratum is not stratum and b. their faq says my stratum is buggy while their implementation is simply out of spec.

i will support it if i get paid to do it Grin

I hear you, Genoil. NO pools have standard "stratum" support, and the vardiff is also flakey.

Coinotron, ethpool/ethermine, miningpoolhub are pretty good. Coinmine.pl as well although there's a little hack in my code to support it.

I've added support at my pool for direct stratum support of this protocol if anyone wants to try it. http://eth.cncoin.farm I've needed someone to do a good test on it besides my tiny 60MH. I've tried with both amd OpenCL and cuda versions and they seem to work, but some more hammering would be appreciated.

PontiacGTX

member

Activity: 71

Merit: 10

anyone using an AMD card, has GPU core clocks spikes if the card has boost? is there a way to tell the miner to use a certain frequency?

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: Vaccinus on May 16, 2016, 05:56:59 AM

Quote from: adamvp on May 16, 2016, 05:51:59 AM

Quote from: Ayers on May 16, 2016, 01:56:37 AM

Quote from: malekbaba on May 15, 2016, 02:55:05 PM

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

about what calculator do you speak?
I have (without proxy because proxy hangs on my rig) significally less earnings (with 72mhs I get only 0,67 instead of 0,81 like according to calculator from etherscan)

i think he is talking about any calculator, i'm mining with 66mh and getting 0.7 per day or slightly more, with the stratum

With external proxy? Now I am trying in coinmine by using - S flag but it is going to same earnings rate as in dwarfpool by get work... And please answer me how to make failover stratum pool in command cause my attempts was failed..

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: ComaWombat on May 16, 2016, 10:02:06 AM

I managed to build 1.0.8 on Ubuntu 16.04 but I had to make a directory called "CL" in the main directory and copy "cl.hpp" file from my old 1.0.7 build folder in there. Looks like that folder and file are missing from github.

I removed it from the repo because on Windows it's loaded from external dependencies. Shouldn't it be part of the OpenCL ICD?

ComaWombat

member

Activity: 89

Merit: 11

I managed to build 1.0.8 on Ubuntu 16.04 but I had to make a directory called "CL" in the main directory and copy "cl.hpp" file from my old 1.0.7 build folder in there. Looks like that folder and file are missing from github.

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: MrOneTwo on May 16, 2016, 08:31:20 AM

Hi,
I have a problem with the compilation version 1.0.8 on Ubuntu 14.04. After copying the command
git clone https://github.com/Genoil/cpp-ethereum what you need to do next in order to properly compile the program?
Thanks in advance for your help

If you click on that link above in your post and scroll all the way to the bottom, there is a heading Building on Ubuntu. Is that what you are looking for? I've used those steps on 14.04 for both AMD/nVidia and they work great.

MrOneTwo

newbie

Activity: 1

Merit: 0

Hi,
I have a problem with the compilation version 1.0.8 on Ubuntu 14.04. After copying the command
git clone https://github.com/Genoil/cpp-ethereum what you need to do next in order to properly compile the program?
Thanks in advance for your help

Vaccinus

sr. member

Activity: 406

Merit: 250

Quote from: adamvp on May 16, 2016, 05:51:59 AM

Quote from: Ayers on May 16, 2016, 01:56:37 AM

Quote from: malekbaba on May 15, 2016, 02:55:05 PM

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

about what calculator do you speak?
I have (without proxy because proxy hangs on my rig) significally less earnings (with 72mhs I get only 0,67 instead of 0,81 like according to calculator from etherscan)

i think he is talking about any calculator, i'm mining with 66mh and getting 0.7 per day or slightly more, with the stratum

Topic: ethminer-0.9.41-genoil-1.1 - page 63. (Read 397360 times)