In the latest EthControl do you still need UAC to be disabled? I don't really feel comfortable doing this from a security standpoint.
BTW, will you update to Z-ENEMY VER 1.11 (PUBLIC v4)? https://bitcointalk.org/index.php?topic=3378390.0;all
Topic: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS) - page 3. (Read 25464 times)
June 15, 2018, 06:02:57 AM
June 14, 2018, 10:15:27 AM
EthControl V2.19 Linux released with fix for AMD OC issues when using m.2 extending.
Try EthMonitoring OS today: https://ethmonitoring.com/guide
Supports Nvidia OC
Supports AMD OC
Supports custom software remote deployment
Try EthMonitoring OS today: https://ethmonitoring.com/guide
Supports Nvidia OC
Supports AMD OC
Supports custom software remote deployment
June 13, 2018, 08:00:06 AM
I've deleted my reply, as your policy seems fair.
June 13, 2018, 07:13:17 AM
EthMonitoring source for windows is completely different from compiled EXE. It even doesnt work anymore because it uses some old monitoring site (https://monitoring.mylifegadgets.com/api/update).
This will lead to not trust it.
This will lead to not trust it.
I already received your email about this and already wrote you back, seems that you can't keep up with your word
About source is already written before, it's closed because of competition already stole some code, not pointing any fingers but many know that already.CryptoDregde can be used as Stats Only mode currently, waiting for API to get proper stats from it.
June 12, 2018, 10:37:59 AM
Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
Just a follow up. Single mining ethereum at MiningPoolHub, 38 hours in execution without any rejected share.
/ThumbsUp
June 12, 2018, 06:46:13 AM
Will you add new CryptoDredge miner? https://bitcointalk.org/index.php?topic=4129696.0;all
June 11, 2018, 12:53:59 AM
Added CCMiner v2.2.6 for PHI2
June 08, 2018, 10:57:02 AM
Hi, I'm using it right now with the Claymore v11.8
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
Hello,
Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018
Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
June 07, 2018, 01:59:03 AM
Hi, I'm using it right now with the Claymore v11.8
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
Hello,
Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018
June 06, 2018, 12:13:11 AM
Hi, I'm using it right now with the Claymore v11.8
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
June 05, 2018, 02:53:18 PM
EthMonitoring OS ready for public testing:
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
Hi there! Thank you for your previous answer and your good work.
I'm advancing in the tests, and it is working very well, except two things.
I have now three GPUs RX570 Rog Strix, and all have the same rom flashed on.
- One is in a riser, and it isn't working, keeps receiving jobs, but, only shows 0.000Mh/s (I'll replace the riser tomorrow)
- On the other two, I'm setting the values for the GPUs in the command as follow:
-cclock 1200,1200 -cvddc 850,850 -mclock 2075,2075 -mvddc 931,931
It applies the config for one GPU, and the other stays with ROM configs or Radeon Profile, if configured. On the logs I'm receiving the following messages:
Quote
00:33:50 domingo, 3 de junho de 2018 : Pulling config changes from API
00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Am I doing something wrong?00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Thanks again!
Hey,
Can you try this latest build 1017: https://github.com/JamesSmith2/EthControl/releases
June 03, 2018, 11:20:56 PM
EthMonitoring OS ready for public testing:
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
Hi there! Thank you for your previous answer and your good work.
I'm advancing in the tests, and it is working very well, except two things.
I have now three GPUs RX570 Rog Strix, and all have the same rom flashed on.
- One is in a riser, and it isn't working, keeps receiving jobs, but, only shows 0.000Mh/s (I'll replace the riser tomorrow)
- On the other two, I'm setting the values for the GPUs in the command as follow:
-cclock 1200,1200 -cvddc 850,850 -mclock 2075,2075 -mvddc 931,931
It applies the config for one GPU, and the other stays with ROM configs or Radeon Profile, if configured. On the logs I'm receiving the following messages:
Quote
00:33:50 domingo, 3 de junho de 2018 : Pulling config changes from API
00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Am I doing something wrong?00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Thanks again!
May 27, 2018, 01:24:59 PM
EthMonitoring OS ready for public testing:
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
May 25, 2018, 01:33:11 PM
EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
Nokia5556
Yeah, my main account is locked, waiting for admins respond
May 25, 2018, 10:21:09 AM
EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
Nokia5556
May 24, 2018, 01:47:42 PM
EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner
May 22, 2018, 04:07:19 PM
Hi There!
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
Hello,
Windows AMD does not report power usage, only linux with EthMonitoring OS does currently.
May 22, 2018, 03:51:55 PM
Hi There!
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
May 20, 2018, 04:45:05 AM
How do I monitor EnemyMiner with EthMonitoring version 0.0.34?
"
Latest news
2018-05-17 07:08:00 Added EnemyMiner 1.09b
"
"
Latest news
2018-05-17 07:08:00 Added EnemyMiner 1.09b
"
Hello,
add as ccminer in EthMonitoring.
New sparkpool.com integration done for app:
May 16, 2018, 12:08:59 AM
Nvidia EthMonitoring OS is also ready and waiting for beta testers now.
Includes:
- Fan curve
- OC Support
- Custom software deployment
Also EthControl v20 windows AMD OC is ready for testers.
Includes:
- Fan curve
- OC Support
- Custom software deployment
Also EthControl v20 windows AMD OC is ready for testers.
Jump to: