when the miner is running but gpu's are mining 0 sols because of any reason, error or miner can't initalize, etc. what is the simplest way to make sure the .exe file can automatically relaunch after x seconds of 0 mining ?..
what is the simple script for this ? if anyone has a free file for this would be great...
Topic: EWBF's CUDA Zcash miner - page 35. (Read 2164337 times)
Anyone tried this yet for restarting EWBF on crash?
https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640
https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640
nope, I'm using simple script for it, I don't think it needs this complex solutions, dunno.
Anyways I was asking earlier but didn't got the answer, I was wondering if anyone found a solution for monitoring several rigs and even farms in one instance, one web interface, or something like claymore's monitoring system for bunch of miners?
Anyone tried this yet for restarting EWBF on crash?
https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640
https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640
For most mining pools, your ZCash address is your user name (or username.rigname in some cases like Flypool and Nicehash).
This is wrong. For most pools it is wallet.rig or wallet.rig.email. For Flypool it's wallet.rig for sure.
For exact syntax - go the mining pool of choice and refer to their faq; all pools have examples of bats for different miners.
Apparently in the ewbf's folder you can find several bats for different pools. The one for Flypool is called Fypool for some reason. Just replace the wallet with yours and you are good to go.
zcash address and wallet are most likely the exact same thing you're talking about.
Your user name on Flypool IS your wallet address - which is what I was TRYING to say but apparently some folks misunderstood how I phrased it.
For most mining pools, your ZCash address is your user name (or username.rigname in some cases like Flypool and Nicehash).
This is wrong. For most pools it is wallet.rig or wallet.rig.email. For Flypool it's wallet.rig for sure.
For exact syntax - go the mining pool of choice and refer to their faq; all pools have examples of bats for different miners.
Apparently in the ewbf's folder you can find several bats for different pools. The one for Flypool is called Fypool for some reason. Just replace the wallet with yours and you are good to go.
zcash address and wallet are most likely the exact same thing you're talking about.
For most mining pools, your ZCash address is your user name (or username.rigname in some cases like Flypool and Nicehash).
This is wrong. For most pools it is wallet.rig or wallet.rig.email. For Flypool it's wallet.rig for sure.
For exact syntax - go the mining pool of choice and refer to their faq; all pools have examples of bats for different miners.
Apparently in the ewbf's folder you can find several bats for different pools. The one for Flypool is called Fypool for some reason. Just replace the wallet with yours and you are good to go.
zcash address and wallet are most likely the exact same thing you're talking about.
For most mining pools, your ZCash address is your user name (or username.rigname in some cases like Flypool and Nicehash).
This is wrong. For most pools it is wallet.rig or wallet.rig.email. For Flypool it's wallet.rig for sure.
For exact syntax - go the mining pool of choice and refer to their faq; all pools have examples of bats for different miners.
Apparently in the ewbf's folder you can find several bats for different pools. The one for Flypool is called Fypool for some reason. Just replace the wallet with yours and you are good to go.
Hi all, is there a reason as to why my browser blocks downloads of from EWBF except for 0.0.9 and older versions of the software?
older version were not added to virus definition databases.
Doesn’t answer my question but thanks.
If anyone has trouble downloading it, control+j will bring up the browser download list and from there you unblock the download. Felt like such a noob when my friend told me to use control+j lol
Where would I input my Zcash Address?
Put it in zcash4win AND flypool,.. run both,. let them sync fully.. .then run the ewbf miner after. (at least that's how I run mine..
seems to be working fine) so why card3 is much slower?
all are gfx1070
I had a same problem today. 2 out of 6 cards had lower hasrates no matter what I've changed in AB.all are gfx1070
I fixed it by disabling/enabling cards thru device manager.
Hi,
Can someone maybe help!
The intensity setting does not seem to work...
my problem is i have to set core and mem at -300, otherwise the PC crashes instantly, i even tried with just 1 card installed and same thing happened.
I've got 4x 1060 3GB. i also did a windows reinstallation with Windows 10 but nothing happened same problem!
Thanks for any advice!
can someone maybe post me a command for a low intensity setting!
You need to start at the normal settings like mem -0 and slowly start overclocking your card. Start with 50 and improve with steps of 25 until your card crashes and then set back 25. Putting in immediately -300 is just too much for oyur card as it seems.
For most mining pools, your ZCash address is your user name (or username.rigname in some cases like Flypool and Nicehash).
Where would I input my Zcash Address?
Hi,
Can someone maybe help!
The intensity setting does not seem to work...
my problem is i have to set core and mem at -300, otherwise the PC crashes instantly, i even tried with just 1 card installed and same thing happened.
I've got 4x 1060 3GB. i also did a windows reinstallation with Windows 10 but nothing happened same problem!
Thanks for any advice!
can someone maybe post me a command for a low intensity setting!
The miner doesn't detect my fourth card (all are 1070). Very weird 
Try to set your bios,
PCIE at Gen1
The miner doesn't detect my fourth card (all are 1070). Very weird
I am using an antivirus and I have a google drive account,
it said that:
virus is detected so I cant download this file
Is it true?
it said that:
virus is detected so I cant download this file
Is it true?
Hi, just to be sure...Do I lose any money with --fee 0 ? (and btw, do I just add "--fee 0" to the start file? )
how you put 0 fee?
Code:
INFO: Target: 0004189374bc6a7e...
INFO: Detected new work: bc9b9ab5989cdb131c81
CUDA: Device: 0 GeForce GTX 1070, 8192 MB i:64
CUDA: Device: 1 GeForce GTX 1070, 8192 MB i:64
CUDA: Device: 2 GeForce GTX 1070, 8192 MB i:64
CUDA: Device: 0 Selected solver: 0
CUDA: Device: 1 Selected solver: 0
CUDA: Device: 2 Selected solver: 0
INFO 06:55:45: GPU1 Accepted share 30ms [A:1, R:0]
Temp: GPU0: 57C GPU1: 47C GPU2: 50C
GPU0: 452 Sol/s GPU1: 432 Sol/s GPU2: 208 Sol/s
Total speed: 1092 Sol/s
INFO 06:56:18: GPU1 Accepted share 39ms [A:2, R:0]
INFO: Detected new work: 6d9bf9430423a8b9f3f9
Temp: GPU0: 60C GPU1: 54C GPU2: 54C
GPU0: 449 Sol/s GPU1: 427 Sol/s GPU2: 184 Sol/s
Total speed: 1060 Sol/s
INFO 06:56:29: GPU0 Accepted share 39ms [A:1, R:0]
all are gfx1070
i used Claymore's DualAMD+NVIDIA GPU Miner v9.8 for ethereum mining for long time with out any issues
today i try this miner BTG-nVidia.miner.0.3.4b for bitcoin gold mining the i have the blue screen after 2 minutes mining and the pc is shutdown
i try many time and the same result
when i back to mine the ethereum Claymore's Dual its work fine
any idea please
today i try this miner BTG-nVidia.miner.0.3.4b for bitcoin gold mining the i have the blue screen after 2 minutes mining and the pc is shutdown
i try many time and the same result
when i back to mine the ethereum Claymore's Dual its work fine
any idea please
Not too much oc? May be try dstm's miner: https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765
EDIT: wait, where did you get BTG-nVidia.miner.0.3.4b?? that's not the right name for ewbf's miner. Did you download it from the first page of this thread?
no i download from another site
Well, then you know what to do: delete it, scan pc for viruses, download the right version from this thread and try it with stock clocks first, then oc in accordance with your cards.
Jump to: