Topic: Execoin: | First Open-Source Stealth Wallet Released! | Fast | ASIC-proof - page 95. (Read 281694 times)
March 24, 2014, 01:35:18 AM
One more article about Execoin has been published:
http://www.cryptocoinsnews.com/2014/03/23/execoin-vanguard-asic-free-zone/
March 24, 2014, 01:18:25 AM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
we need to focus on 1 exchange at a time, no need to spread our donations on both exchanges.
Honestly Mintpal is the better of the two exchanges, although Cryptsy has more exposure and name recognition (so did Mt. Gox
) We should vote. I vote for Cryptsy. This way we could all focus on getting this done.
March 24, 2014, 12:31:12 AM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
I've tried that along with +x instead of 755, both with no luck. That's simply trying to run the built executable for ubuntu 12.04. I have the source and dependencies installed, I'm just not sure what I'm supposed to do after that. The instructions that I was directed to for the qt wallet seems to just list the dependencies needed for installation. As far as I can tell it doesn't list a specific file I need to run.
https[Suspicious link removed]coin/blob/master/doc/readme-qt.rst
I believe that's the supposed readme for what I want to install.
So what steps did you take after installing the dependencies? Did you compile it with qmake and then make? What was the output of compiling?
That's the problem. qmake what and in which directory? There are multiple directories in the source download, along with multiple files. That was the part I was unclear about.
Just the main directory of the source. 'cd' into that directory and then type 'qmake' and press enter. Then type 'make' and press enter. A bunch of text should scroll by and hopefully at the end you have an executable built.
Code:
git clone https://github.com/execoin/execoin
cd execoin
qmake
make
March 24, 2014, 12:28:04 AM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
we need to focus on 1 exchange at a time, no need to spread our donations on both exchanges.
Honestly Mintpal is the better of the two exchanges, although Cryptsy has more exposure and name recognition (so did Mt. Gox
) March 23, 2014, 11:11:07 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
we need to focus on 1 exchange at a time, no need to spread our donations on both exchanges.
Sent 0.05 to Cryptsy address.
March 23, 2014, 10:24:51 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
we need to focus on 1 exchange at a time, no need to spread our donations on both exchanges.
March 23, 2014, 09:58:27 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
March 23, 2014, 09:44:17 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
There simply aren't enough people to get through with normal votes.
March 23, 2014, 09:34:09 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
cryptsy: https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Mintpal: https://www.mintpal.com/voting
BTC Address: 1QC9rhCBhD3bLeW1mWFRMqfZgBcUbfRaLT
Only way this will happen is if we buy our way in. Doesn't look like that will happen with this crowd.
March 23, 2014, 08:02:10 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
I just can't see how they could be dumping a lot...when there are less than 3 mill in circulation? I can understand any of these other shitcoins...but 3 mill is really, really rare.
March 23, 2014, 07:44:47 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
Exactly! PPl mine & dump..and cant see the light. I havent sold one yet.
March 23, 2014, 07:34:22 PM
Can anyone please give me a clear, logical explanation of why this coin is only valuated at 4 cents with only 4 million coins in circulation, N scrypt, and 0 premine?
This blows my mind.
This blows my mind.
March 23, 2014, 06:30:29 PM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
I've tried that along with +x instead of 755, both with no luck. That's simply trying to run the built executable for ubuntu 12.04. I have the source and dependencies installed, I'm just not sure what I'm supposed to do after that. The instructions that I was directed to for the qt wallet seems to just list the dependencies needed for installation. As far as I can tell it doesn't list a specific file I need to run.
https[Suspicious link removed]coin/blob/master/doc/readme-qt.rst
I believe that's the supposed readme for what I want to install.
So what steps did you take after installing the dependencies? Did you compile it with qmake and then make? What was the output of compiling?
That's the problem. qmake what and in which directory? There are multiple directories in the source download, along with multiple files. That was the part I was unclear about.
Also, why not just copy the wallet.dat file to a machine that you already have the Execoin wallet working on?
I only created/accessed the wallet on my main gaming windows rig. As I said I do have a backup. The problem is that the only rigs that I have left (that I trust) is my ubuntu mining rig and laptop running a ubuntu live boot cd (faulty hdd).
March 23, 2014, 05:26:10 PM
Just sent .1 BTC to coin votes for EXE. That's 500 votes, cmon guys lets get this coin on Cryptsy! I'll be watching the blockchain, send what you can. I'm willing to send more to get this going.
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Cryptsy? How about Mintpal: https://www.mintpal.com/voting - 2549 votes so far. Registered users can vote 5 times per hour or votes can be bought for 0.0001 BTC.
Okay, Ill setup an account and donate. Time to bring this currency mainstream.
Sent .07. Lets get this coin up that list..
+1 Please vote for Execoin at Mintpal!
March 23, 2014, 04:16:15 PM
Just sent .1 BTC to coin votes for EXE. That's 500 votes, cmon guys lets get this coin on Cryptsy! I'll be watching the blockchain, send what you can. I'm willing to send more to get this going.
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Cryptsy? How about Mintpal: https://www.mintpal.com/voting - 2549 votes so far. Registered users can vote 5 times per hour or votes can be bought for 0.0001 BTC.
Okay, Ill setup an account and donate. Time to bring this currency mainstream.
Sent .07. Lets get this coin up that list..
March 23, 2014, 04:07:46 PM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
I've tried that along with +x instead of 755, both with no luck. That's simply trying to run the built executable for ubuntu 12.04. I have the source and dependencies installed, I'm just not sure what I'm supposed to do after that. The instructions that I was directed to for the qt wallet seems to just list the dependencies needed for installation. As far as I can tell it doesn't list a specific file I need to run.
https://github.com/execoin/execoin/blob/master/doc/readme-qt.rst
I believe that's the supposed readme for what I want to install.
So what steps did you take after installing the dependencies? Did you compile it with qmake and then make? What was the output of compiling?
Also, why not just copy the wallet.dat file to a machine that you already have the Execoin wallet working on?
March 23, 2014, 04:02:41 PM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
I've tried that along with +x instead of 755, both with no luck. That's simply trying to run the built executable for ubuntu 12.04. I have the source and dependencies installed, I'm just not sure what I'm supposed to do after that. The instructions that I was directed to for the qt wallet seems to just list the dependencies needed for installation. As far as I can tell it doesn't list a specific file I need to run.
https://github.com/execoin/execoin/blob/master/doc/readme-qt.rst
I believe that's the supposed readme for what I want to install.
So what steps did you take after installing the dependencies? Did you compile it with qmake and then make? What was the output of compiling?
March 23, 2014, 03:09:45 PM
Just sent .1 BTC to coin votes for EXE. That's 500 votes, cmon guys lets get this coin on Cryptsy! I'll be watching the blockchain, send what you can. I'm willing to send more to get this going.
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
https://www.cryptsy.com/coinvotes
BTC Address: 125CF2pTj5Yo3wuwdjvDiQYaPSNCD4NHje
Cryptsy? How about Mintpal: https://www.mintpal.com/voting - 2549 votes so far. Registered users can vote 5 times per hour or votes can be bought for 0.0001 BTC.
Okay, Ill setup an account and donate. Time to bring this currency mainstream.
March 23, 2014, 02:50:32 PM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
I've tried that along with +x instead of 755, both with no luck. That's simply trying to run the built executable for ubuntu 12.04. I have the source and dependencies installed, I'm just not sure what I'm supposed to do after that. The instructions that I was directed to for the qt wallet seems to just list the dependencies needed for installation. As far as I can tell it doesn't list a specific file I need to run.
https://github.com/execoin/execoin/blob/master/doc/readme-qt.rst
I believe that's the supposed readme for what I want to install.
March 23, 2014, 12:12:21 PM
So my main rig has been dead for about a week now. It held the execoin wallet. I kept a backup but my only means of accesing it currently is via my linux rig.
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
I'm trying to figure out how to install the wallet on ubuntu 13.10. I install all the correct dependencies listed in the "readme-qt" settings. After that there are really no instructions. So I assumed I would just run the file via ./ but when I do this I get back the error saying permission denied.
I have tried it both in sudo and root with the same results.
Any suggestions?
Try setting the binary to executable with the following command:
Code:
chmod 755 filename
Replace filename with the actual name of the file you're trying to execute.
Jump to: