Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 143.

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: UnclWish on April 05, 2017, 09:09:42 PM

Quote from: zzzzzzzzzz on April 05, 2017, 07:11:20 PM

Quote from: UnclWish on April 05, 2017, 05:06:58 PM

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

So, you're happy to use the result of his hard work, which is open source, but you begrudge him 1%? Do you mine solo just to avoid the 1% pool fee, too? Do you steal rolls of toilet paper out of public rest rooms, while you're at it?

At this moment I use Claymore miners - they are give more speed on my Tahiti and Pitcairn cards. I told about possibility to disable fee. Even Claymore make this possibility on his miners.
And you're right - I allready paying too much fees (pools, etc.) and I don't want to add another 1%.

He clearly stated he added a VOLUNTARY fee, and you are whining for how to disable it?

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: UnclWish on April 05, 2017, 09:09:42 PM

Quote from: zzzzzzzzzz on April 05, 2017, 07:11:20 PM

Quote from: UnclWish on April 05, 2017, 05:06:58 PM

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

So, you're happy to use the result of his hard work, which is open source, but you begrudge him 1%? Do you mine solo just to avoid the 1% pool fee, too? Do you steal rolls of toilet paper out of public rest rooms, while you're at it?

At this moment I use Claymore miners - they are give more speed on my Tahiti and Pitcairn cards. I told about possibility to disable fee. Even Claymore make this possibility on his miners.
And you're right - I allready paying too much fees (pools, etc.) and I don't want to add another 1%.

OK, so you *do* realize that Claymore's -nofee option reduces the hash rate you get by a bit more than his devfee, right? He says so in his README.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zzzzzzzzzz on April 05, 2017, 07:11:20 PM

Quote from: UnclWish on April 05, 2017, 05:06:58 PM

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

So, you're happy to use the result of his hard work, which is open source, but you begrudge him 1%? Do you mine solo just to avoid the 1% pool fee, too? Do you steal rolls of toilet paper out of public rest rooms, while you're at it?

At this moment I use Claymore miners - they are give more speed on my Tahiti and Pitcairn cards. I told about possibility to disable fee. Even Claymore make this possibility on his miners.
And you're right - I allready paying too much fees (pools, etc.) and I don't want to add another 1%.

nerdralph

sr. member

Activity: 588

Merit: 251

I just tried out pre-6 on my Linux 4.10/AMDGPU-Pro 16.6 rig.
Looks like nobody added detection of AMDGPU-Pro to the autoconf, so I had to set

Code:

LDFLAGS="-L/opt/amdgpu-pro/lib/x86_64-linux-gnu"

for for configure.

The binary kernels seem to be loaded:

Code:

[21:06:17] Loaded binary image ./binary-kernel/ethash-newEllesmeregw192l8.bin
[21:06:17] Initialising kernel ethash-new.cl with nfactor 10, n 1024
[21:06:17] Loaded binary image ./binary-kernel/ethash-newEllesmeregw192l8.bin
[21:06:17] Initialising kernel ethash-new.cl with nfactor 10, n 1024

However performance is slightly less than sgminer-gm 5.5.5 with my Rx 470 @1169/2100. gg gives me ~29.0 vs 29.35 for sgminer-gm. I also tried with the core clock unlocked, and get
~28.85.

zzzzzzzzzz

full member

Activity: 150

Merit: 100

Quote from: UnclWish on April 05, 2017, 05:06:58 PM

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

So, you're happy to use the result of his hard work, which is open source, but you begrudge him 1%? Do you mine solo just to avoid the 1% pool fee, too? Do you steal rolls of toilet paper out of public rest rooms, while you're at it?

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

god damn nicehash. rofl. Anyways, I vote you get some money for your work. open source and all is fun, but if you are the only one doing god's work (i know you arent the only one, but pretty much)...then...do it like claymore. based on sgminer, which a lot of people like the interface better anyways. my2cents. got to have the same speed at least though Sad

NiceHashSupport

hero member

Activity: 588

Merit: 501

Hey, zawawa, we are looking for mining sw developers, full time job. If you are interested, let us know.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: UnclWish on April 05, 2017, 05:06:58 PM

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

Well, if I don't collect the fee, I will have to cancel the project very soon.
Development costs a lot of time and money, and I ran out of money now. It's as simple as that.
My wife just told me I should be generous only if I had spare money, and she's probably right.
I really hope this model works, though. The number doesn't look good at all now, but I'm crossing my fingers...

cryptominer420

sr. member

Activity: 450

Merit: 255

Removing dev fee from miner is easy but could cause zawawa to stop developing open source. So I will not go through steps to remove it.

UnclWish

sr. member

Activity: 1484

Merit: 253

Claymore made a choise in his miner and fee can be disabled via -nofee 1 option. Can you make in gg miner this choise too?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: joaocha on April 05, 2017, 08:07:58 AM

How Your donation works?,

Since im mining Etc, How it ill mine to your Eth wallet?
It ill generate 2 dags?

Could you explain better, and add more of your coin address (like exp, etc, eth, ..) so we could mine the right coin to help you

The default settings for ETH should work with EXP and ETC.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: cryptominer420 on April 05, 2017, 08:59:13 AM

Quote from: joaocha on April 05, 2017, 08:07:58 AM

How Your donation works?,

Since im mining Etc, How it ill mine to your Eth wallet?
It ill generate 2 dags?

Could you explain better, and add more of your coin address (like exp, etc, eth, ..) so we could mine the right coin to help you

It mines 99 shares for you then mines 1 share for the dev, shouldn't regenerate the dag from what I have seen.

This is pretty much it. I already set up developer's fees for ETH, ZEC, and FTC.

joaocha

full member

Activity: 254

Merit: 100

On my 390 i got 20w increase from claymore Undecided

cryptominer420

sr. member

Activity: 450

Merit: 255

Quote from: joaocha on April 05, 2017, 08:07:58 AM

How Your donation works?,

Since im mining Etc, How it ill mine to your Eth wallet?
It ill generate 2 dags?

Could you explain better, and add more of your coin address (like exp, etc, eth, ..) so we could mine the right coin to help you

It mines 99 shares for you then mines 1 share for the dev, shouldn't regenerate the dag from what I have seen.

joaocha

full member

Activity: 254

Merit: 100

How Your donation works?,

Since im mining Etc, How it ill mine to your Eth wallet?
It ill generate 2 dags?

Could you explain better, and add more of your coin address (like exp, etc, eth, ..) so we could mine the right coin to help you

joaocha

full member

Activity: 254

Merit: 100

Getting 125 on gg, and 124 on claymore. Gg is faster now Wink

I ill check power usage and ill report here!

lexele

full member

Activity: 190

Merit: 100

Quote from: zawawa on April 04, 2017, 05:28:25 PM

I just uploaded a new pre-release:

https://github.com/zawawawa/gatelessgate/releases/tag/v0.1.3-pre6

I managed to add another 1Mh/s to Ethereum minining with GCN3 devices, including Fury, Fury X, Nano, and RX 470/480. I believe power consumption is slightly reduced, too. Please let me know if that is actually the case.

Having said that, I also had to add a voluntary 1% developer's fee for a number of reasons. I am not going to get into boring details here, but it suffices to say that I love open-source development and I would like to make it work. I trust your good conscience.

I started GG pre6 on win7 before running to work. I could'nt play much with the settings but here what I saw in 10 min:
- Had to drop xI to 1024 because the default 4608 was crashing my cards, had no time to try something else.
- got the same hashrate than pre4 (but no optimised xI)
- fan speed was lower, wich could indicate less consumption, but the test was not long enough to be accurate.
- Once I arrived to work, the rig seems down.

Edit: I finally connected to the rig and it was working fine after 8 hours.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I just uploaded a new pre-release:

https://github.com/zawawawa/gatelessgate/releases/tag/v0.1.3-pre6

I managed to add another 1Mh/s to Ethereum minining with GCN3 devices, including Fury, Fury X, Nano, and RX 470/480. I believe power consumption is slightly reduced, too. Please let me know if that is actually the case.

Having said that, I also had to add a voluntary 1% developer's fee for a number of reasons. I am not going to get into boring details here, but it suffices to say that I love open-source development and I would like to make it work. I trust your good conscience.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: jstefanop on April 03, 2017, 08:13:35 PM

Why do you set the worksize for your asm bins at 192l4 for windows and 192l8 for linux?

The worksize is the same. It's 192. l[4|8] signifies the size of "long" of the host, but I don't think it is necessary. The legacy sgminer codes need quite a bit of cleaning...

jstefanop

legendary

Activity: 2174

Merit: 1401

Why do you set the worksize for your asm bins at 192l4 for windows and 192l8 for linux?

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 143. (Read 214431 times)