Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 83.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: lostprophet007 on January 18, 2018, 05:02:14 AM

Hello zawawa,
thanks for your work and time.

Are you going to add Trezarcoin in your tool?
thanls

Trezarcoin mines through neoscrypt algoritm. GGS support neoscrypt algo mining. Just setup your pool via custom pool in GGS to mine trezarcoin selecting neoscrypt algo.

lostprophet007

newbie

Activity: 41

Merit: 0

Hello zawawa,
thanks for your work and time.

Are you going to add Trezarcoin in your tool?
thanls

UnclWish

sr. member

Activity: 1484

Merit: 253

Find new issue, but it happens not every time... Didn't find dependenses...
Low difficulty share after recieving new job before share accepted

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: BartoszN1990 on January 17, 2018, 05:22:19 PM

Well i start tested this software and i can say is amazing well have some issu to connect other server but nicehash working much better like nicehash miner. It run over 5 h without frozen / reset.

But i start thing why if i runt this software + msi afterburner then i can use only setings from GGS. when i put my setings oc + fan to msi it works fiew seconds after GGS run him self setings ?

You should be able to turn off fan control and overclocking on the "Devices" tab page.
If that doesn't work, please let me know with more details.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: bob256k on January 17, 2018, 05:32:34 PM

Hi I have (2) GTX 1060 6gb and (2) Gigabyte RX570 4GB with RX580 4gb FW flashed on them in the same system. I am using GGS 1.22 and Neoscrpyt for Gobyte, but the hashrate for the gtx 1060 is low ( 260-300khs) and the RX 570's fluctuate madly (36-800khs) constantly. I was able to get 650 khs per card using win 7 and ccminer, i need help getting GGS 1.22 stable for mining. Any thoughts on settings?

My general advice is to not mix AMD and NVIDIA in any mining rigs.
Also, my NeoScrypt kernel doesn't work well at all with NVIDIA cards at the moment.
(I have a feeling that I have to have two different kernels for NVIDIA and AMD.)
I would disconnect 1060's and see how that goes first.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: coke15 on January 17, 2018, 12:58:44 PM

Quote from: zawawa on January 16, 2018, 07:11:57 PM

Quote from: coke15 on January 16, 2018, 04:35:08 PM

hi

i had again the loose of config when reboot :/ vers 1.2.2 i have 3 files on appdata/ggs

dont understand :/

edit:at starup,he is lonnnnnnnnnng....same at stop :/ not in previous vers

You could try one of these:

http://www.thewindowsclub.com/enable-disable-disk-write-caching-windows-7-8
https://superuser.com/questions/833552/manually-flushing-write-cache-on-windows

Slow startups are due to the workaround for the nasty GPU order problem.
I had to extend the length of the diagnostic tests for more reliable results.
Let me see what I can do...

hi

disk caching is already on :/

No, you should turn OFF disk write caching.

bob256k

newbie

Activity: 5

Merit: 0

Hi I have (2) GTX 1060 6gb and (2) Gigabyte RX570 4GB with RX580 4gb FW flashed on them in the same system. I am using GGS 1.22 and Neoscrpyt for Gobyte, but the hashrate for the gtx 1060 is low ( 260-300khs) and the RX 570's fluctuate madly (36-800khs) constantly. I was able to get 650 khs per card using win 7 and ccminer, i need help getting GGS 1.22 stable for mining. Any thoughts on settings?

BartoszN1990

full member

Activity: 218

Merit: 100

https://deeponion.org

Well i start tested this software and i can say is amazing well have some issu to connect other server but nicehash working much better like nicehash miner. It run over 5 h without frozen / reset.

But i start thing why if i runt this software + msi afterburner then i can use only setings from GGS. when i put my setings oc + fan to msi it works fiew seconds after GGS run him self setings ?

coke15

member

Activity: 176

Merit: 10

Quote from: zawawa on January 16, 2018, 07:11:57 PM

Quote from: coke15 on January 16, 2018, 04:35:08 PM

hi

i had again the loose of config when reboot :/ vers 1.2.2 i have 3 files on appdata/ggs

dont understand :/

edit:at starup,he is lonnnnnnnnnng....same at stop :/ not in previous vers

You could try one of these:

http://www.thewindowsclub.com/enable-disable-disk-write-caching-windows-7-8
https://superuser.com/questions/833552/manually-flushing-write-cache-on-windows

Slow startups are due to the workaround for the nasty GPU order problem.
I had to extend the length of the diagnostic tests for more reliable results.
Let me see what I can do...

hi

disk caching is already on :/

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: treanski on January 17, 2018, 01:17:48 AM

@Zazawa

you need to review the switching between DevFee mode, the longer the miner is runtime the slower it restarts the gpu´s . now after 12h runtime it didnt even make it to start all gpus during devfee time and then back to usermode. so we loose both mining time. im talking about cryptonight, dont know if it is the same on other algos

Apparently, CPU threads are not coordinating well. I will upload a (hopefully) more stable version shortly.

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

@Zazawa

you need to review the switching between DevFee mode, the longer the miner is runtime the slower it restarts the gpu´s . now after 12h runtime it didnt even make it to start all gpus during devfee time and then back to usermode. so we loose both mining time. im talking about cryptonight, dont know if it is the same on other algos

ChaseAProfit

newbie

Activity: 11

Merit: 0

Quote from: zawawa on January 16, 2018, 10:51:23 AM

I thought I was working on something else. lol

https://i.imgur.com/Mod2u2e.png

Just finished loading 1.2.2 zawawa and am very pleased, excellent work on the miner program. Just took a couple of minutes to get up and running on custom pool mining Expanse at my normal Claymore hashrate.
Would have liked to have seen the temp graph though.

Your more than welcome to the DEV fee's.

Chase

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: coke15 on January 16, 2018, 04:35:08 PM

hi

i had again the loose of config when reboot :/ vers 1.2.2 i have 3 files on appdata/ggs

dont understand :/

edit:at starup,he is lonnnnnnnnnng....same at stop :/ not in previous vers

You could try one of these:

http://www.thewindowsclub.com/enable-disable-disk-write-caching-windows-7-8
https://superuser.com/questions/833552/manually-flushing-write-cache-on-windows

Slow startups are due to the workaround for the nasty GPU order problem.
I had to extend the length of the diagnostic tests for more reliable results.
Let me see what I can do...

coke15

member

Activity: 176

Merit: 10

hi

i had again the loose of config when reboot :/ vers 1.2.2 i have 3 files on appdata/ggs

dont understand :/

edit:at starup,he is lonnnnnnnnnng....same at stop :/ not in previous vers

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: nerdralph on January 16, 2018, 12:53:05 PM

Quote from: UnclWish on January 16, 2018, 02:38:31 AM

Quote from: nerdralph on January 15, 2018, 10:54:32 PM

Quote from: zawawa on January 15, 2018, 05:05:17 PM

I have been playing with phymem.sys for the last few days and confirmed that on-the-fly memory timing mods are possible with GGS, that is, I was able to manipulate parameters for memory timings such as ACTRD/ACTWR, TRRD, TRC, FAW/T32AW etc. from a user-space.

Now, to make this feature useful, I need to write a BIOS parser, probably in C#, in order to access memory timing straps.
We will see how that goes.

I've got register decoding of RAS, CAS, MISC, and a couple others added to amdmeminfo. Should simplify your coding work.
https://github.com/nerdralph/amdmeminfo

As I know, you're know many things about GDDR5 memory. I would like to know more about how GDDR5 works. And how to change timings the right way. I didn't understand why different memory manufacterers needs different timings... Not only more or lower speed... And I want to know how timings depends on each other...
Don't you have any guide about it? Or maybe you can describe it on example...

I'm still learning, though I've described much of what I know in my blog.
http://nerdralph.blogspot.ca/2017/05/gddr5-memory-timing-details.html

Thanks! That will helps me!

But I still can't understand - why different manufactured memory (Samsung, Hynix etc.) requires different memory timings... Looks like it's no standard of GDDR5 and every manyfacturer makes GDDR5 it's own way...

hopfi2k

newbie

Activity: 48

Merit: 0

Quote from: nerdralph on January 16, 2018, 12:53:05 PM

Quote from: UnclWish on January 16, 2018, 02:38:31 AM

Quote from: nerdralph on January 15, 2018, 10:54:32 PM

Quote from: zawawa on January 15, 2018, 05:05:17 PM

I have been playing with phymem.sys for the last few days and confirmed that on-the-fly memory timing mods are possible with GGS, that is, I was able to manipulate parameters for memory timings such as ACTRD/ACTWR, TRRD, TRC, FAW/T32AW etc. from a user-space.

Now, to make this feature useful, I need to write a BIOS parser, probably in C#, in order to access memory timing straps.
We will see how that goes.

I've got register decoding of RAS, CAS, MISC, and a couple others added to amdmeminfo. Should simplify your coding work.
https://github.com/nerdralph/amdmeminfo

As I know, you're know many things about GDDR5 memory. I would like to know more about how GDDR5 works. And how to change timings the right way. I didn't understand why different memory manufacterers needs different timings... Not only more or lower speed... And I want to know how timings depends on each other...
Don't you have any guide about it? Or maybe you can describe it on example...

I'm still learning, though I've described much of what I know in my blog.
http://nerdralph.blogspot.ca/2017/05/gddr5-memory-timing-details.html

Oh, that's excellent stuff - thanks @nerdralph!

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: UnclWish on January 16, 2018, 02:38:31 AM

Quote from: nerdralph on January 15, 2018, 10:54:32 PM

Quote from: zawawa on January 15, 2018, 05:05:17 PM

I have been playing with phymem.sys for the last few days and confirmed that on-the-fly memory timing mods are possible with GGS, that is, I was able to manipulate parameters for memory timings such as ACTRD/ACTWR, TRRD, TRC, FAW/T32AW etc. from a user-space.

Now, to make this feature useful, I need to write a BIOS parser, probably in C#, in order to access memory timing straps.
We will see how that goes.

I've got register decoding of RAS, CAS, MISC, and a couple others added to amdmeminfo. Should simplify your coding work.
https://github.com/nerdralph/amdmeminfo

As I know, you're know many things about GDDR5 memory. I would like to know more about how GDDR5 works. And how to change timings the right way. I didn't understand why different memory manufacterers needs different timings... Not only more or lower speed... And I want to know how timings depends on each other...
Don't you have any guide about it? Or maybe you can describe it on example...

I'm still learning, though I've described much of what I know in my blog.
http://nerdralph.blogspot.ca/2017/05/gddr5-memory-timing-details.html

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I thought I was working on something else. lol

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: nerdralph on January 15, 2018, 10:54:32 PM

Quote from: zawawa on January 15, 2018, 05:05:17 PM

I have been playing with phymem.sys for the last few days and confirmed that on-the-fly memory timing mods are possible with GGS, that is, I was able to manipulate parameters for memory timings such as ACTRD/ACTWR, TRRD, TRC, FAW/T32AW etc. from a user-space.

Now, to make this feature useful, I need to write a BIOS parser, probably in C#, in order to access memory timing straps.
We will see how that goes.

I've got register decoding of RAS, CAS, MISC, and a couple others added to amdmeminfo. Should simplify your coding work.
https://github.com/nerdralph/amdmeminfo

As I know, you're know many things about GDDR5 memory. I would like to know more about how GDDR5 works. And how to change timings the right way. I didn't understand why different memory manufacterers needs different timings... Not only more or lower speed... And I want to know how timings depends on each other...
Don't you have any guide about it? Or maybe you can describe it on example...

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: zawawa on January 15, 2018, 05:05:17 PM

I have been playing with phymem.sys for the last few days and confirmed that on-the-fly memory timing mods are possible with GGS, that is, I was able to manipulate parameters for memory timings such as ACTRD/ACTWR, TRRD, TRC, FAW/T32AW etc. from a user-space.

Now, to make this feature useful, I need to write a BIOS parser, probably in C#, in order to access memory timing straps.
We will see how that goes.

I've got register decoding of RAS, CAS, MISC, and a couple others added to amdmeminfo. Should simplify your coding work.
https://github.com/nerdralph/amdmeminfo

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 83. (Read 214410 times)