Gateless Gate Sharp 1.2.5 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.5-alpha
* Significantly improved thread management.
* Reduced CPU load.
* Color-coded the device list.
* Added information about power consumption.
* Added features to manage OpenCL binaries.
* Added notifications for new releases.
There are already bug reports before I make an announcement. lol
My weekend is shot, I guess. orz
Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 78. (Read 214431 times)
@zazawa the switching between devfee& usermode is more fucked up then before, after 3:35h miner just started 6/12 gpus for devfee...
GGS 1.2.2-1.2.5 have some problem with a dashboard tab. On dashboard only 2 cards are working. In the log all 6 cards working ok!
Also, maybe someone can advise. From rig of 6 card, one specific card could suddenly lose speed, from 900+ H/s on cryptonight to 60 H/s. I tried to reduce mem freq, but it didn't help. It happens not only with GGS, but also with cast-xmr, so it is hardware related.
Also, maybe someone can advise. From rig of 6 card, one specific card could suddenly lose speed, from 900+ H/s on cryptonight to 60 H/s. I tried to reduce mem freq, but it didn't help. It happens not only with GGS, but also with cast-xmr, so it is hardware related.
no miner is going to do better in eth then claymore... why bother trying?
On Linux with Polaris and Tonga, Claymore is already one of the slowest.
p.s. apologies to zawawa if I'm feeding your trolls.
so this miner is just for r9 series cards wtf?
No. It's more optimized for RX series.so this miner is just for r9 series cards wtf?
No. It's more optimized for RX series.so this miner is just for r9 series cards wtf?
No. It's more optimized for RX series.
can we use x for auto raw intensity?
Hi Zawawa,
Great job for your miner. Need some optimize on Rx Vega. If you have sometime, Please look into lyra2v2 and Xevan algo.
Great job for your miner. Need some optimize on Rx Vega. If you have sometime, Please look into lyra2v2 and Xevan algo.
just fired up 1.2.5 too...
will report in few hours about stability...
found first "mini" bug...the selected currency for profitability dont get saved, so you need to set it again after restart
will report in few hours about stability...
found first "mini" bug...the selected currency for profitability dont get saved, so you need to set it again after restart
In 1.2.5 CPU usage returns to 0-2% - it's good.
Thanks for binary managment. But you was right - it's nothing gives to me...
Pitcairn kernel still not optimal. Without kernel speed about 10-15 h/s more.
I think that Pitcairns with 2Gb and 4Gb too different to have equal kernel...
I don't try to enable OC/UC on Pitcairn.
Is there was any fixes with BSOD when enable OC/UC on Pitcairns?
P.S. Can you add in charts statistics for finded shares?
Thanks for binary managment. But you was right - it's nothing gives to me...
Pitcairn kernel still not optimal. Without kernel speed about 10-15 h/s more.
I think that Pitcairns with 2Gb and 4Gb too different to have equal kernel...
I don't try to enable OC/UC on Pitcairn.
Is there was any fixes with BSOD when enable OC/UC on Pitcairns?
P.S. Can you add in charts statistics for finded shares?
Hey Zawawa !
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
Have you tried Adrenalin 18.1.1? With this driver, the miner skips the workaround for the GPU order problem, so it might actually work.
Morning,
Yes, im already have 18.1.1 ,but im tried some options, only crashing at worksize 256(64-128 works with low hashrate), when GPU#2 building for neoscrypt.
How about 1/4/64. The new default values work quite well. Also, please don't forget to turn off CrossFire.
no miner is going to do better in eth then claymore... why bother trying?
Actually, I know for a fact that there are better miners out there, and I'm pretty sure I will eventually catch up.
It didn't take me too long with CryptoNight, and GGS is the fastest NeoScrypt miner for AMD. You never know.
Hey Zawawa !
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
Have you tried Adrenalin 18.1.1? With this driver, the miner skips the workaround for the GPU order problem, so it might actually work.
Morning,
Yes, im already have 18.1.1 ,but im tried some options, only crashing at worksize 256(64-128 works with low hashrate), when GPU#2 building for neoscrypt.
no miner is going to do better in eth then claymore... why bother trying?
so this miner is just for r9 series cards wtf?
No. It's more optimized for RX series.
so this miner is just for r9 series cards wtf?
r9 fury read as r9 nano and u need a litle tweak on hawai card and fiji .... on neoscrypt
Regards
Regards
Version Gateless_Gate_Sharp_1.1.20 works fine, stable. 1.2.x hashrate is higher, but not at all stable...
Freeze and not enough memory message when I restart it with R280 and 280X.
Freeze and not enough memory message when I restart it with R280 and 280X.
Hey Zawawa long time since I visited, If you can get a comandline version out with sgminer style API I would love to include it instead of the old GatelessGate in my zpoolMiner which is a modified version of the nicehashminer legcy.
That'd be great. I will work on it.
Jump to: