Too high intensity on neoscrypt?
only I 1
http://prntscr.com/i35gmk
I would try WORKSIZE=64.
Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 80. (Read 214410 times)
only I 1
http://prntscr.com/i35gmk
I would try WORKSIZE=64.
Hey Zawawa, still not in the pipe to support cmdline for your miner ? i would love to test it out, but if it's not scriptable, i can't use it 
Thanks
Thanks
I just came up with an idea. I could just make the current version scriptable and call it a command-line version!
It should be pretty straight forward to implement...
What drivers should I use with 5x R9 Nano? :think:
Hey Zawawa !
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
First of all thanks for supporting miners with this promising multiminer app.
I have an issue with one of my rig, there is 5 GPU , all of them RX 480, but they are a bit different, like 3x MSI RX 480 8g + 2x XFX RX 480 8g.
They working on different clockrate ( MSI 1303 , XFX 1288 ) , its wasnt a problem before, but if i start mining with your miner , after few sec , when building gpu kernel, its crashing.
The other rigs , where similar GPU's, working without problem.
Any idea?
Ty,
Dru
Hey Zawawa, still not in the pipe to support cmdline for your miner ? i would love to test it out, but if it's not scriptable, i can't use it
Thanks
Thanks
Is there a roadmap for when LBC will be supported for dual mining? I would love to check this miner out but need my LBC 
Too high intensity on neoscrypt?
only I 1
http://prntscr.com/i35gmk
Too high intensity on neoscrypt?
only I 1
http://prntscr.com/i35gmk
Too high intensity on neoscrypt?
only I 1
Too high intensity on neoscrypt?
only I 1
Too high intensity on neoscrypt?
Hey. Thanks for the development!
It would be possible to add in the list a color marking of video cards, the same colors as on the chart. It is convenient to see which card "sags" in hashes
It would be possible to add in the list a color marking of video cards, the same colors as on the chart. It is convenient to see which card "sags" in hashes
I like the second one. Shouldn’t be hard at all...
Hey. Thanks for the development!
It would be possible to add in the list a color marking of video cards, the same colors as on the chart. It is convenient to see which card "sags" in hashes
https://c.radikal.ru/c41/1801/c9/51cba011b7b4.jpg
https://a.radikal.ru/a12/1801/71/39dd53fa8d70.jpg
It would be possible to add in the list a color marking of video cards, the same colors as on the chart. It is convenient to see which card "sags" in hashes
https://c.radikal.ru/c41/1801/c9/51cba011b7b4.jpg
https://a.radikal.ru/a12/1801/71/39dd53fa8d70.jpg
OK, OK. This will be fixed in the next version.
Thanks! And please made something with Pitcairn optimization... Well, I run GGS on 2 core Pentium G something, so that ain't so bad, me thinks. 
1.2.2 version uses 0-1% of CPU power.XMRig CPU miner on 2 double threads uses up to 31% of my CPU and gives up to 175 h/s on cryptonight.
GGS 1.2.3-1.2.4 uses 30% at start and up to 18% during mining. I think - it's very much! Too much!
I can imagine what happend on 2 cores CPU's - about 50% of CPU to GGS?
GPU miner must use max 5% of CPU. Best if it's uses 0-1% as GGS up to 1.2.2.
If consider, that 270X on 1.2.2 gives 20 more h/s than 1.2.3-1.2.4 and CPU load, I roll back to 1.2.2.
On 1.2.2 it's bad that voltage sets from 1st card to all cards same model... But I can OC and UV with Claymore miner, f.e.
OK, OK. This will be fixed in the next version.
I'm running a rig of 6 rx580 mining cryptonight. 1.2.1 shows great result, and working pretty stable. However when I tried to use 1.2.2 and 1.2.3 - results are completely different with the same settings, not all cards working. Any idea?
Intstall latest AMD driver 18.1.1 or at least 17.12.2.Disable AMD crossfire in Radeon Settings.
Well, I run GGS on 2 core Pentium G something, so that ain't so bad, me thinks.
1.2.2 version uses 0-1% of CPU power.XMRig CPU miner on 2 double threads uses up to 31% of my CPU and gives up to 175 h/s on cryptonight.
GGS 1.2.3-1.2.4 uses 30% at start and up to 18% during mining. I think - it's very much! Too much!
I can imagine what happend on 2 cores CPU's - about 50% of CPU to GGS?
GPU miner must use max 5% of CPU. Best if it's uses 0-1% as GGS up to 1.2.2.
If consider, that 270X on 1.2.2 gives 20 more h/s than 1.2.3-1.2.4 and CPU load, I roll back to 1.2.2.
On 1.2.2 it's bad that voltage sets from 1st card to all cards same model... But I can OC and UV with Claymore miner, f.e.
It might be just first tab is not showing results, as in log I see shares are being submitted
Jump to: