An answer to the miner rack pic would be nice, that one can't be all that hard? Real? Photoshop? Unboxed retail inventory? Something other?
Topic: GAW / Josh Garza discussion Paycoin XPY xpy.io ION ionomy. ALWAYS MAKE MONEY :) - page 802. (Read 3377922 times)
April 21, 2015, 02:37:32 PM
A less dank GIF to liven things up during this intermission:
An answer to the miner rack pic would be nice, that one can't be all that hard? Real? Photoshop? Unboxed retail inventory? Something other?
An answer to the miner rack pic would be nice, that one can't be all that hard? Real? Photoshop? Unboxed retail inventory? Something other?
April 21, 2015, 02:35:48 PM
I guess I scared him off?
April 21, 2015, 02:34:19 PM
It's been all of half an hour since he last posted, and it's the middle of a workday. Geez.
He definitely saw the request, he just now probably realised this forum wont eat up his bullshit and ask for more like some other forum that he came from.
Captain Joe "Transparency" Mordica, wakey wakey.
April 21, 2015, 02:32:26 PM
It's been all of half an hour since he last posted, and it's the middle of a workday. Geez.
April 21, 2015, 02:31:08 PM
Joe Mordica?
April 21, 2015, 02:18:13 PM
jmordica:
Or just show us this (filled out by you when you ordered the new service... since I'm sure I have to be specific):
Or just show us this (filled out by you when you ordered the new service... since I'm sure I have to be specific):
April 21, 2015, 02:17:52 PM
It looks like there were three "phases":
1) "hosted" miners were actually not hosted by GAW but rented hashrate somewhere in China, and it was unreliable (April-July 2014)
2) which led to getting rid of mining altogether (ZenCloud and later Hashlets, July 2014 - January 2015)
3) then hardware was ordered from Bitmain, so presumably some fractional mining was going on (October 2014 - January 2015)
I'd love to see jmordica's comments on this as he seems to have been part of the whole thing from the early Gridseeds to the unpaid MS Power bills.
1) "hosted" miners were actually not hosted by GAW but rented hashrate somewhere in China, and it was unreliable (April-July 2014)
2) which led to getting rid of mining altogether (ZenCloud and later Hashlets, July 2014 - January 2015)
3) then hardware was ordered from Bitmain, so presumably some fractional mining was going on (October 2014 - January 2015)
I'd love to see jmordica's comments on this as he seems to have been part of the whole thing from the early Gridseeds to the unpaid MS Power bills.
I don't think there's much evidence the hosted miners were virtual until June 2014. In June, there are statements about transitioning hardware and actually still selling hosted hardware that's real. I BOLDLY SPECULATE the hosting was legit for April and May 2014.
Google "josg21 betarigs" and you'll probably find the early beginnings of hashrate rentals. @volder over at GH described that scheme with China and it does make sense, although actual proof is somewhat lacking.
@jmordica?
April 21, 2015, 02:17:19 PM
jmordica:
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Quote
As someone in the power industry... I know how a business gets a specilized feed into a building/warehouse/etc... You need to tell them how much you want... i.e. 100A @ 4160kV and specify load requirements during peak/off-peak so that they can figure out what size transformer you need.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
Joe answer this question. I know the memes are extra dank today but you have to try and resist them.
jmordica we can see you are online, response please.
Its hard to think of bullshit when posed with a question you have no defense for right ?
April 21, 2015, 02:15:43 PM
About the question who knew what: I have deleted the email dump, but while I was skimming it, I did see an email in -- August? if not August, then late July or early Sept. -- from Josh Garza to Joe Mordica, with the subject line 'Dan Pease'. In it, Garza basically says: whoa, did you actually tell Dan Pease how our "mining" works? [Scare quotes mine, of course.] Mordica says: yes, he said you wanted me to. Garza says: well, yes, I wanted you to fill him in a bit, but not *that* much. Do NOT do that again!
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
I believe that was Capuano, not Mordica, IIRC.
Anyone who has the emails want to check? I could download them again, but ...
April 21, 2015, 02:13:48 PM
I get it, if Adam Matlack really lost $500k on this scamcoin to Josh, then I understand why he wants to wrestle control of it and perpetuate it. If Joe wasn't paid by Josh, I get why he may have asked for compensation in any form.
The thing I don't get is why the scam has to continue in virtually the same form and why the head scammer Josh has any stake in it whatsoever?
The thing I don't get is why the scam has to continue in virtually the same form and why the head scammer Josh has any stake in it whatsoever?
Why are you assuming Josh still has any stake in XPY?
This is the guy who doled out over 100% equity in his company.
All publications regarding the 50 Prime Controllers show "?" under the 15 controllers owned by Josh/GAW. To date neither Josh, GAW, Phil Vadala, Mineral, Coinstand nor any other party has come forward to claim ownership? Unless I missed it.
I can't say that for sure either. I am sure you know more than me? He did own something at some point since he needed to sell paycoins to fill his pockets in the dumped emails.
I propose the top 100 addresses that own 90% of the coins need to identify themselves or have their coins destroyed to ensure he doesn't have any stake in XPY.
April 21, 2015, 02:12:12 PM
fucking crickets thats what we get.
Scumbag have no defense for this other than simply going, "IM SOWWWYY"
Scumbag have no defense for this other than simply going, "IM SOWWWYY"
April 21, 2015, 02:10:52 PM
jmordica:
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Quote
As someone in the power industry... I know how a business gets a specilized feed into a building/warehouse/etc... You need to tell them how much you want... i.e. 100A @ 4160kV and specify load requirements during peak/off-peak so that they can figure out what size transformer you need.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
Joe answer this question. I know the memes are extra dank today but you have to try and resist them.
April 21, 2015, 02:09:09 PM
OK SO I had a few things wrong but I'll let Joe explain it.
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20
far out man
http://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20
far out manhttp://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
Haha
* jmordica missed the Public Speaking 101 class..
haha ya i think i even saw spraypaint on your finger
That was probably ketchup from the burger in the background!Spray paint?
Bahahahaha! I forgot about this one.. Yikes that must be some good spray paint!
Answer the man in front (vancefox), stop dodging simple questions.
I see only two possible answers, 1. You are a complete retard(which I strongly doubt) or 2. You knew about everything from the start and just went along with it.
Or 3. Both
April 21, 2015, 02:02:17 PM
OK SO I had a few things wrong but I'll let Joe explain it.
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20 far out man
http://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20
far out manhttp://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
Haha
* jmordica missed the Public Speaking 101 class..
haha ya i think i even saw spraypaint on your finger
That was probably ketchup from the burger in the background!Spray paint?
Bahahahaha! I forgot about this one.. Yikes that must be some good spray paint!
Answer the man in front (vancefox), stop dodging simple questions.
I see only two possible answers, 1. You are a complete retard(which I strongly doubt) or 2. You knew about everything from the start and just went along with it.
April 21, 2015, 02:02:08 PM
The 100% stake rate is just one small step in the right direction (Re: solving the hyperinflation issue) but there is still much more to be done in regard to keeping such dumping from happening from Prime Controllers.
The purpose of the Prime Controllers were/is to create opportunities for investors and to be used to support bidding along with providing supporting business models with advantages/incentives for bringing new customers into the industry.
Hey Hayseed - not two pages ago you called me out for cherry-picking your comments to make my points.
I corrected that - and I'm waiting for you to address ALL of my points - or is this just about you trying to promote yourself as some kind of XPY messiah hell-bent on righting the wrongs you participated in creating?
There are no baby steps that are going to solve anything here - only jackhammers and nuclear weapons. Your new bosses have their hyperstaking money printing machines now and the kool-aid drinkers are applauding the 250% inflation decrease - but you know damn well that isn't sustainable, yet you applaud it as a necessary 'small step'?
People are redeemed by taking bold action (or inaction as the case may be) to tell the truth about complicity. Not only are you lying to us now, but you're helping this drama continue by your actions, and you seek redemption?
April 21, 2015, 02:00:11 PM
About the question who knew what: I have deleted the email dump, but while I was skimming it, I did see an email in -- August? if not August, then late July or early Sept. -- from Josh Garza to Joe Mordica, with the subject line 'Dan Pease'. In it, Garza basically says: whoa, did you actually tell Dan Pease how our "mining" works? [Scare quotes mine, of course.] Mordica says: yes, he said you wanted me to. Garza says: well, yes, I wanted you to fill him in a bit, but not *that* much. Do NOT do that again!
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
I believe that was Capuano, not Mordica, IIRC.
April 21, 2015, 01:59:20 PM
OK SO I had a few things wrong but I'll let Joe explain it.
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20 far out man
http://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
When you watch the video watch Joe poorly read from a script and the other fellow smirking its so shady its not even funny.
Funny the part I want starts at 4:20
far out manhttp://www.youtube.com/watch?v=toYbyLd6v5s&t=4m20s
Haha
* jmordica missed the Public Speaking 101 class..
haha ya i think i even saw spraypaint on your finger
That was probably ketchup from the burger in the background!Spray paint?
Bahahahaha! I forgot about this one.. Yikes that must be some good spray paint!
April 21, 2015, 01:58:37 PM
About the question who knew what: I have deleted the email dump, but while I was skimming it, I did see an email in -- August? if not August, then late July or early Sept. -- from Josh Garza to Joe Mordica, with the subject line 'Dan Pease'. In it, Garza basically says: whoa, did you actually tell Dan Pease how our "mining" works? [Scare quotes mine, of course.] Mordica says: yes, he said you wanted me to. Garza says: well, yes, I wanted you to fill him in a bit, but not *that* much. Do NOT do that again!
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
Since Dan Pease was pretty heavily involved, the idea that he didn't know that the mining was virtual, and that Garza was horrified to learn that he'd been told, says a lot. On the other hand, what it does not say is that Joe Mordica didn't know.
April 21, 2015, 01:55:57 PM
jmordica:
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
https://forum.gethashing.com/t/watchlist-gawminers-paybase-zencloud/67/9148
Quote
As someone in the power industry... I know how a business gets a specilized feed into a building/warehouse/etc... You need to tell them how much you want... i.e. 100A @ 4160kV and specify load requirements during peak/off-peak so that they can figure out what size transformer you need.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Only way to do that, outside of pulling a number out of your ass, is to calculate it...
Joe signed for the feed... so he told them how much electricity he needed.
My question for him: Were you told how much power you needed or did YOU choose the transformer size?
And my next question is... when the feed was run, who oversaw the installation of the panel(s) and the wiring to the miners/racks? I would assume it would be the Chief Technical Officer...
In other words... I find it very hard to believe that you didn't know what was truly going on.
Feel free to answer here or at GH. I'm really curious to the answer since you're being so forthcoming...
April 21, 2015, 01:54:32 PM
To Eric and Joe back away from PayCoin 100% and destroy your coins. Prove it.
Actions speak louder than words. Publicly state that PayCoin is a pre-mined scam coin and the whole enterprise, and anyone involved with its development, promotion, or sale is a scammer.
Actions speak louder than words. Publicly state that PayCoin is a pre-mined scam coin and the whole enterprise, and anyone involved with its development, promotion, or sale is a scammer.
I do not, nor have I ever, owned a single Paycoin.
I was never issued any by the company, nor have I ever purchased one from the company nor any person or exchange.
The only time I've ever interacted with Paycoin was building the company wallets and initial prime controller daemons.
TL;DR, I have no coins to destroy, kind sir.
In my opinion Eric has proven (and has been proven through documents I've read) he was one of the clean ones involved in the company and got out when he realized the big picture. Joe on the other hand sits on the council of Primes. Off the top of my head he owns 5 PC's and is leasing some out to XPYtrust.
I will say this once again. I do not own anything (Paycoin or Prime Controllers). Hopefully this is clear. I never owned a Prime Controller. I never owned a single Paycoin (or a fraction of it). I was part of the team that worked on the Paycoin project. I was promised Paycoin among other things but never received any compensation/assets besides my salary while working at GAW (which I assume you have all seen by now).
I am a volunteer on the XPYTrust board which manages 5 Prime Controllers. I am in the process of putting together a bold approach to burn many of the Controller Coins and stake. When this proposal is finished I will present to Paycoin Foundation and XPY Dev for review. The plan consists of some of the items discussed a couple of pages back in this thread referring to a 50% cut of the coin and hyperinflation.
I believe this to be the only approach (if executed correctly) to give Paycoin a chance at survival. I will be offering up my position as a volunteer on the XPYTrust board if this approach (or something similar) fails to be successful and/or gets complete.
XPY has taking a beating (for obvious reasons) and may not be able to stand for much more without such drastic change to the current design.
What is the reasoning for the 100% stake rate on Prime Controllers? Why do these people feel they deserve this high stake rate when PC's do absolutely nothing for the network? If you are going to burn the stake, why have it that high in the first place?
GREED is what it seems like. This coin is going no where. From one scammers hands to another.
The 100% stake rate is just one small step in the right direction (Re: solving the hyperinflation issue) but there is still much more to be done in regard to keeping such dumping from happening from Prime Controllers.
The purpose of the Prime Controllers were/is to create opportunities for investors and to be used to support bidding along with providing supporting business models with advantages/incentives for bringing new customers into the industry.
Jump to: