[GB] USB ASIC miner - closed and completed - page 5.

nottm28

hero member

Activity: 574

Merit: 500

Quote from: fydel on June 25, 2013, 02:51:02 PM

Quote from: friedcat on June 23, 2013, 01:37:18 PM

New Sales Policy

Customers in EU, Switzerland and North Europe non-EU countries Please contact forum member yxt, whose RRP is agreed by us.

Customers in the rest of the world
Minimum Order Volume of 50 USB sticks. Price of 0.99 each. 2% sent as redundancy (not in warranty). Shipping is free.

If you reach the total volume of 1,000 USB sticks, price is dropped to 0.89 each and we will pay back the price difference of all your historic transaction of USB sticks.

If we get an excluding deal with resellers in some certain countries we will stop directly supply USBs towards there, as in the case of China zone,

I am sorry to ask but what happens if we reach more than 1.000 sticks?

A 0.1 BTC refund per device would be nice. Grin

Plus "the price difference of all your historic transaction of USB sticks" - so 1 BTC per stück ordered?

fydel

hero member

Activity: 522

Merit: 500

Hasta la Bitcoin siempre!

Quote from: friedcat on June 23, 2013, 01:37:18 PM

New Sales Policy

Customers in EU, Switzerland and North Europe non-EU countries Please contact forum member yxt, whose RRP is agreed by us.

Customers in the rest of the world
Minimum Order Volume of 50 USB sticks. Price of 0.99 each. 2% sent as redundancy (not in warranty). Shipping is free.

If you reach the total volume of 1,000 USB sticks, price is dropped to 0.89 each and we will pay back the price difference of all your historic transaction of USB sticks.

If we get an excluding deal with resellers in some certain countries we will stop directly supply USBs towards there, as in the case of China zone,

I am sorry to ask but what happens if we reach more than 1.000 sticks?

A 0.1 BTC refund per device would be nice. Grin

rupy

hero member

Activity: 725

Merit: 503

Quote from: Coiner.de on June 25, 2013, 06:46:01 AM

rupy hat seinen Stick ohne Kühlkörper betrieben.
Da muß man sich über Verfärbungen nicht wundern.
Diese Art von Chip muß über die Unterseite gekühlt werden.

Can you take a look under your bottom heatsink?

trasla

hero member

Activity: 707

Merit: 500

Gibt es ne Empfehlung, wo ich die sinks her bekomme?
Ist das einfach zu basteln, a la Wärmeleitpaste drauf, heat-sink drauf, fertig?

2weiX

legendary

Activity: 2058

Merit: 1005

this space intentionally left blank

Ich hab meine Eruptoren auch auf der Oberseite mit kleinen Heatsinks versehen, die werden Arschheiss, und haben, bilde ich mir ein, von 1% auf 0.5% gesenkt.

Coiner.de

hero member

Activity: 778

Merit: 531

Quote from: rupy on June 12, 2013, 10:59:24 AM

Quote from: yxt on June 08, 2013, 01:48:34 AM

HW with your new heat-sink?

Will let it run for a while, I suspect same HW/A but longer life...

rupy hat seinen Stick ohne Kühlkörper betrieben.
Da muß man sich über Verfärbungen nicht wundern.
Diese Art von Chip muß über die Unterseite gekühlt werden.

@achtung:
Rückerstattung gibt es nur für die zu 0,99 BTC. Außerdem ist das doch klar eine Erfolgsprämie für den Zwischenhändler.

achtung

newbie

Activity: 11

Merit: 0

Ich verstehe dass man nur noch 700 bestellen soll, und eigentlich sind die dann fast für nichts, weil auch die 300, die schon bestellt wurden kosten dann 0.89, richtig?

emdesigns

newbie

Activity: 2

Merit: 0

Hello yxt

do need to know how to send the pens

Can you help me

regards

alibert

full member

Activity: 196

Merit: 100

Für den neuen Preis nehme ich natürlich auch noch welche

nottm28

hero member

Activity: 574

Merit: 500

yxt - any update from friedcat?

zoro

full member

Activity: 226

Merit: 100

i notice also a correlation of HW with pool and USB hub Wink

but i think 4.5 utility is just fine

rupy

hero member

Activity: 725

Merit: 503

Can you take a picture of one of yours instead? There is going to be alot of hard words on the forum if these start to fail because of bad heatsink design. The problem is my chip had 0,9% HW/A witout HS, I'm pretty sure that would be higher if I add that new flat HS.

Edit: maybe it was premature, the HW/A is now up to 0.5%...

Still can someone look at their PCB?

I'm temporarily putting a fan on mine just to try and prove my case.

Ok, nm, still climbing, with fan, and two heatsinks... there seems to be no correlation between heat and HW?!

Menig

legendary

Activity: 910

Merit: 1000

Quote from: yxt on June 24, 2013, 11:43:25 AM

Falls sie von mir sind sende sie zurück und du bekommst neue (schreib mir davor aber bitte eine PN),
ansonsten muss man mal schauen

Ist bei dir auch etwas verfärbt?

muss ich nachschauen, gebe Dir dann Bescheidm ist mir zumindst beim ersten Blick nicht aufgefallen.

Gruß Menig

yxt

legendary

Activity: 3528

Merit: 1116

Falls sie von mir sind sende sie zurück und du bekommst neue (schreib mir davor aber bitte eine PN),
ansonsten muss man mal schauen

Ist bei dir auch etwas verfärbt?

Menig

legendary

Activity: 910

Merit: 1000

Quote from: yxt on June 24, 2013, 11:11:40 AM

0,3% is good also, up to the 1% range is ok

I talked a few times with friedcat about the heat.
He is sure they can handle it.
But as i wrote here a few times I recommend cooling..

Can you please take a picture from the discolored PCB?

yxt, ich habe hier drei defekte USB-Erupters... trotz externer Kühlung (USB-Ventilatoren je 5 Sticks 1 Ventilator, das Setup 7x)
Wie soll denn die Garantieabwicklung aussehen ? Denke Du hast den direkteren Draht zu Friedcat.... ;(

Gruß Menig

yxt

legendary

Activity: 3528

Merit: 1116

0,3% is good also, up to the 1% range is ok

I talked a few times with friedcat about the heat.
He is sure they can handle it.
But as i wrote here a few times I recommend cooling..

Can you please take a picture from the discolored PCB?

rupy

hero member

Activity: 725

Merit: 503