How do you add the --worker command ? Do you delete the worker name and "." after the eth wallet address, then add worker command with space then worker name?
I am in work for 12 hours so only noticed the "problem" on my pool dashboard
I have the same problem with my 2 workers just showing as 1 worker named eth1.0 at the pool.
Shares looks normal for my total hashrate of 180mh, but my reported hashrate are a lot lower and spiking with variable figures.
On Gminer 2.49, pool reported numbers matched my Hashrate on local screen.
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 23. (Read 306623 times)
2.50 is broken.
Not reporting to the pool but mining
similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker nameNot reporting to the pool but mining
Adding the
Code:
--worker
parameter resolved the issue for me... 2.50 is broken.
Not reporting to the pool but mining
similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker nameNot reporting to the pool but mining
2.50 is broken.
Not reporting to the pool but mining
similar to mine...client is mining but on pool the miner is reporting as worker "eth 1.0", when i start 2.50 on other rigs, then they all have the same worker name Not reporting to the pool but mining
hi,
using GMiner 2.50 with ethermine ant see some 1-3% stales everyday but GMiner statistics windows show no stales.
It is always like shares X/0/0
Is it normal ?
using GMiner 2.50 with ethermine ant see some 1-3% stales everyday but GMiner statistics windows show no stales.
It is always like shares X/0/0
Is it normal ?
2.50 is broken.
Not reporting to the pool but mining
Not reporting to the pool but mining
...i have similar problem
RTX 2080 cannot start - miner stops right before cards recognizing.
No "green" list with card names.
my other cards are OK (2070 and 2070S, 2080S, 30xx)
2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
check if the pool and your wallet address are specified correctly in the configuration file of the miner
I didn't change anything in my bat file. Just replaced old version .exe with new one
2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
check if the pool and your wallet address are specified correctly in the configuration file of the miner
2.50 is broken.
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
Not reporting to the pool but mining
Did i mine to someone else's address for last 1h?
GMiner v2.50 available for download
v2.50
+ auto fan feature, now you can set target fan temperature (--tfan, --tfan_min, --tfan_max, Windows only)
+ reset overclocking before DAG generation (Windows only)
+ improved beamhash performance (~+2%)
+ improved cuckatoo32 performance (~+5%)
+ added display of GPU model in statistics table
+ added --worker parameter to specify worker name for ETH pools thats doesn't support wallet.worker notation
+ added option to display date in log (--log_date)
+ added option to log stratum (--log_stratum)
+ display epoch and block number on new job
+ updated Web UI for --api
+ uses --proto stratum for NiceHash by default
+ removed algorithms: VDS, BFC
+ bug fixes and stability improvements
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.50
+ auto fan feature, now you can set target fan temperature (--tfan, --tfan_min, --tfan_max, Windows only)
+ reset overclocking before DAG generation (Windows only)
+ improved beamhash performance (~+2%)
+ improved cuckatoo32 performance (~+5%)
+ added display of GPU model in statistics table
+ added --worker parameter to specify worker name for ETH pools thats doesn't support wallet.worker notation
+ added option to display date in log (--log_date)
+ added option to log stratum (--log_stratum)
+ display epoch and block number on new job
+ updated Web UI for --api
+ uses --proto stratum for NiceHash by default
+ removed algorithms: VDS, BFC
+ bug fixes and stability improvements
Ethash fee is 0.65%
KAWPOW fee is 1%
Well done on GMiner 2.50.
Still testing how high i can boost the vram. I wait days to be sure it works.
-----+----+-----+-----------+--------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
| 0 3070 38 C 0 % 62.07 MH/s 1621/0/0 1440 8100 112 W 554.18 KH/W |
| 1 3070 35 C 0 % 62.18 MH/s 1514/0/0 1290 8100 112 W 555.18 KH/W |
| 2 3070 35 C 0 % 62.18 MH/s 1514/0/0 855 8100 113 W 550.22 KH/W |
| 3 3070 33 C 0 % 62.18 MH/s 1565/0/0 1200 8100 112 W 555.16 KH/W |
| 4 3060Ti 65 C 32 % 61.42 MH/s 1515/0/9 1365 8000 120 W 511.86 KH/W |
| 310.02 MH/s 7729/0/9 569 W 544.86 KH/W |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
12:47:28 Uptime: 2d 15:55:40 Shares/Minute: 2.02 Electricity: 36.371kWh
12:47:31 New Job: 569fe870 Pool: eth.2miners.com:2020 Diff: 8.72G
Still testing how high i can boost the vram. I wait days to be sure it works.
-----+----+-----+-----------+--------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
| 0 3070 38 C 0 % 62.07 MH/s 1621/0/0 1440 8100 112 W 554.18 KH/W |
| 1 3070 35 C 0 % 62.18 MH/s 1514/0/0 1290 8100 112 W 555.18 KH/W |
| 2 3070 35 C 0 % 62.18 MH/s 1514/0/0 855 8100 113 W 550.22 KH/W |
| 3 3070 33 C 0 % 62.18 MH/s 1565/0/0 1200 8100 112 W 555.16 KH/W |
| 4 3060Ti 65 C 32 % 61.42 MH/s 1515/0/9 1365 8000 120 W 511.86 KH/W |
| 310.02 MH/s 7729/0/9 569 W 544.86 KH/W |
+---+-------+----+-----+-----------+--------+----+-----+-----+-------------+
12:47:28 Uptime: 2d 15:55:40 Shares/Minute: 2.02 Electricity: 36.371kWh
12:47:31 New Job: 569fe870 Pool: eth.2miners.com:2020 Diff: 8.72G
Its just me or using
--cache_dag on for eth +zil
and SAFE Dag 2 for safe dag generation at extreme overclock
produce a 5-/6 % Hashrate decrease on RT 30xxs family ?
--cache_dag on for eth +zil
and SAFE Dag 2 for safe dag generation at extreme overclock
produce a 5-/6 % Hashrate decrease on RT 30xxs family ?
The information in the --help screen is not accurate:
The --kernel/-k option doesn't do anything in the command line nor in the config file, i had to use --oc to switch kernels.
The --kernel/-k option doesn't do anything in the command line nor in the config file, i had to use --oc to switch kernels.
Can anybody help me with memory controler load below 20% which mean asus rog strix rtx 2060 gets very low hash rate and low power consumption.Cant get it stable more than 1 hour.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
Core -502 mem +2100-2290 Linux. Windows core -502 mem 1100-1300
I even tried stock settings after completly unistaling nvidia driver with DDU and problem is there! Is my gpu defective with some memory leaking problem???
Can anybody help me with memory controler load below 20% which mean asus rog strix rtx 2060 gets very low hash rate and low power consumption.Cant get it stable more than 1 hour.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
Core -502 mem +2100-2290 Linux. Windows core -502 mem 1100-1300
Can anybody help me with memory controler load below 20% which mean asus rog strix rtx 2060 gets very low hash rate and low power consumption.Cant get it stable more than 1 hour.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
My settings are:
GPU clock: 1410 mhz
Memory clock : 7651 mhz
voltage:781V
I had problem with phoenix,t-rex and now gminer.Cannot find stable hash rate more then one hour,then some kind of memory leak happens.I tried many oc settings and nothing helps.
It seems to be a little bit slower. Checked it on 1 rig with 3070 GPUs. Went down from 301.26 MH/s (after over 1000 shares for each GPU) to 301.01 MH/s.
1xxx GPUs seem not affected.
1xxx GPUs seem not affected.
So far GJ on 249 guys!
Running it on several rigs with 3070s for 30mins already - no probs so far!
Running it on several rigs with 3070s for 30mins already - no probs so far!
GMiner v2.49 available for download
v2.49
+ improved DAG generation, now miner generates valid DAG in extremal OC modes.
--safe_dag option allows you to choose a way to DAG generation.
There are two modes:
Fast mode(1, default for GTX GPUs): miner generates DAG as quickly as possible, DAG errors are possible at maximum overclocking.
Safe mode(2, default for RTX GPUs): miner generates DAG with error control, useful for RTX cards at maximum overclocking.
+ improved memory tweaks (fixed problem with possibly broken DAG on epoch change)
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.49
+ improved DAG generation, now miner generates valid DAG in extremal OC modes.
--safe_dag option allows you to choose a way to DAG generation.
There are two modes:
Fast mode(1, default for GTX GPUs): miner generates DAG as quickly as possible, DAG errors are possible at maximum overclocking.
Safe mode(2, default for RTX GPUs): miner generates DAG with error control, useful for RTX cards at maximum overclocking.
+ improved memory tweaks (fixed problem with possibly broken DAG on epoch change)
Ethash fee is 0.65%
KAWPOW fee is 1%
I see GMiner is one of the top recommended miners for Etchash. Just wondering if there is potential to add Ubqhash support to a future release? Ubqhash is another Ethash variant so should be similar process.
Here's some of the technical info: https://blog.ubiqsmart.com/introducing-ubqhash-8fa515befd7
Would adding Ubqhash to GMiner be possible?
Here's some of the technical info: https://blog.ubiqsmart.com/introducing-ubqhash-8fa515befd7
Would adding Ubqhash to GMiner be possible?
Jump to: