Quote
Memory tweaks initialization failed, run miner with admin privileges
Any help? I'm running it with admin privileges and doesn't work.
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 26. (Read 306647 times)
Any help? I'm running it with admin privileges and doesn't work.
Finally. Working straps. On Phoenix I couldn't get any stable or higher than stock hashrate with straps. With the newer version of GMiner on 1060 I get 26.6Mh/s with 2080Mhz on core and 5000Mhz on memory.
But straps don't help with 1070s, because of their weak cores, not memory(
Don't have any 1070Ti's to compare with them
But straps don't help with 1070s, because of their weak cores, not memory(
Don't have any 1070Ti's to compare with them
GMiner v2.46 available for download
v2.46
+ added memory tweaks for Nvidia GPUs with GDDR5X and GDDR5 memory, requires admin privileges (--mt 1-6)
+ improved --api parameter, now you can bind ip address (--api [address][port] or --api [port])
+ added option to control watchdog restart delay (--watchdog_restart_delay)
+ optimized memory usage while generating DAG (will able to run miner on 13 GPUs+ rigs with 4GB memory and without swap)
+ improved kernel auto-tuning
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.46
+ added memory tweaks for Nvidia GPUs with GDDR5X and GDDR5 memory, requires admin privileges (--mt 1-6)
+ improved --api parameter, now you can bind ip address (--api [address][port] or --api [port])
+ added option to control watchdog restart delay (--watchdog_restart_delay)
+ optimized memory usage while generating DAG (will able to run miner on 13 GPUs+ rigs with 4GB memory and without swap)
+ improved kernel auto-tuning
Ethash fee is 0.65%
KAWPOW fee is 1%
Hi! Could someone give me advice: I have 8x1050Ti and my current hashrate ~52Mh. But my average hashrate only ~40Mh.
When I mined Eth my hashrate was stable. Maybe this is raven's feature or I habe a problem with my cards?
https://imgur.com/a/iq2dwAT
When I mined Eth my hashrate was stable. Maybe this is raven's feature or I habe a problem with my cards?
https://imgur.com/a/iq2dwAT
Does anyone know what kind of hashrate I get with GMiner mining VOTECOIN? I cannot find a calculator.
My overclocked 1080 ti shows 36 mh / s and has 57 C. I want to overclock it more. I increase more for memory and for core, but it still shows 36 mh / s. What should I do?
my parameters:
miner.exe --algo ethash --server eth.2miners.com:2020 --user 0xa5b6ca6aa44422cv910726d2avd71e9da5739512.worker1 -t 75
my parameters:
miner.exe --algo ethash --server eth.2miners.com:2020 --user 0xa5b6ca6aa44422cv910726d2avd71e9da5739512.worker1 -t 75
I have two 1080 Ti and both are on Pheonixminer the option I use is -straps 2 so it runs equal to ETHEnlargmentPillR2 and I get about 46 MH and no longer have to use ETHenlargment any more.
I heard T-Rex also implemented something similar. Maybe GMiner has not. 1080 and 1080Ti are odd balls because of their GDDR5x memory type.
My overclocked 1080 ti shows 36 mh / s and has 57 C. I want to overclock it more. I increase more for memory and for core, but it still shows 36 mh / s. What should I do?
my parameters:
miner.exe --algo ethash --server eth.2miners.com:2020 --user 0xa5b6ca6aa44422cv910726d2avd71e9da5739512.worker1 -t 75
my parameters:
miner.exe --algo ethash --server eth.2miners.com:2020 --user 0xa5b6ca6aa44422cv910726d2avd71e9da5739512.worker1 -t 75
GMiner v2.45 available for download
v2.45
v2.45
Well - i had a chance to test RTX 3060 12GB (Palit Dual)
Tested algos with version 2.45
PowerLimit to 100pct to see basic wattage
Core - no overclock
Memory +1000
Zhash (144,5) - 64.9 Sol/s (Power 166W)
(miniZ 66 Sol/s)
GrinCuckatoo - 1.24 G/s (Power 169W)
CuckooCycle - 7.19 G/s (Power 162W)
Cuckatoo32 - 0.47 G/s (Power 169W)
KawPow - 23.7 MH/s (Power 167W)
BeamV3 - 22.3 Sol/s (Power 169W)
(miniZ 23.4 Sol/s)
DaggerHash - 24.8 MH/s (Power 141W)
just for info: Octopus - 44.91 MH/s (Trex 0.19.11)
So there is really nerf for ETHash algos (tested also with Phoenix and NBminer)... sad, but other coins are untouched
Happy Mining to all
What am I doing wrong? I have 3x 1060 6GB, Windows 7 and driver version is 461.09.
Code:
01:14:13 Started Mining on GPU0: GIGABYTE GeForce GTX 1060 6GB [0000:01:00.0]
01:14:13 Started Mining on GPU1: GIGABYTE GeForce GTX 1060 6GB [0000:04:00.0]
01:14:13 Started Mining on GPU2: GIGABYTE GeForce GTX 1060 6GB [0000:05:00.0]
01:14:13 New Job: 293ca94a Difficulty: 10.00G
01:14:13 New Job: 45630a48 Difficulty: 10.00G
01:14:14 New Job: f0ea9e09 Difficulty: 10.00G
01:14:15 New Job: 82e1cdfa Difficulty: 10.00G
01:14:15 New Job: 41983c28 Difficulty: 10.00G
01:14:17 GPU2: Generating DAG for epoch #390 [Dual Buffer 4144 MB]
01:14:17 GPU1: Generating DAG for epoch #390 [Dual Buffer 4144 MB]
01:14:17 Error on GPU0: out of memory
01:14:17 Stopped Mining on GPU0
01:14:18 New Job: 3011e566 Difficulty: 10.00G
01:14:21 New Job: 9e70d186 Difficulty: 10.00G
01:14:24 New Job: 4c874b9d Difficulty: 10.00G
01:14:13 Started Mining on GPU1: GIGABYTE GeForce GTX 1060 6GB [0000:04:00.0]
01:14:13 Started Mining on GPU2: GIGABYTE GeForce GTX 1060 6GB [0000:05:00.0]
01:14:13 New Job: 293ca94a Difficulty: 10.00G
01:14:13 New Job: 45630a48 Difficulty: 10.00G
01:14:14 New Job: f0ea9e09 Difficulty: 10.00G
01:14:15 New Job: 82e1cdfa Difficulty: 10.00G
01:14:15 New Job: 41983c28 Difficulty: 10.00G
01:14:17 GPU2: Generating DAG for epoch #390 [Dual Buffer 4144 MB]
01:14:17 GPU1: Generating DAG for epoch #390 [Dual Buffer 4144 MB]
01:14:17 Error on GPU0: out of memory
01:14:17 Stopped Mining on GPU0
01:14:18 New Job: 3011e566 Difficulty: 10.00G
01:14:21 New Job: 9e70d186 Difficulty: 10.00G
01:14:24 New Job: 4c874b9d Difficulty: 10.00G
aumenta la memoria virtual si estas usando windows 7 llevala a 25 o 30gb de memoria virtual
increase virtual memory if you are using windows 7 take it to 25 or 30gb of virtual memory
Is there any plans to add some kind of memory tweak like the one T-Rex has?
sure
Any way to either run script on startup or set power limit for gpu ?
whats the syntax if I have 1 4gb gpu at index 0 and I want to set a --daglimit option on it. (470 4gb, or is this zombie mode dead for 4gb cards?)
How do i state it so it doesnt apply the dag limit to the rest of the cards.
How do i state it so it doesnt apply the dag limit to the rest of the cards.
GMiner v2.45 available for download
v2.45
+ improved performance on Ethash for Nvidia and AMD GPUs
+ improved performance on KAWPOW for Nvidia GPUs
+ decreased stale shares rate on Nvidia GPUs for Ethash and KAWPOW algorithms
+ removed #3 kernel and added 2 energy efficiency kernels (#5 and #6) on Ethash for Nvidia GPUs
+ improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels
+ optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers (use --pec 0 to exclude memory leaks completely)
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.45
+ improved performance on Ethash for Nvidia and AMD GPUs
+ improved performance on KAWPOW for Nvidia GPUs
+ decreased stale shares rate on Nvidia GPUs for Ethash and KAWPOW algorithms
+ removed #3 kernel and added 2 energy efficiency kernels (#5 and #6) on Ethash for Nvidia GPUs
+ improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels
+ optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers (use --pec 0 to exclude memory leaks completely)
Ethash fee is 0.65%
KAWPOW fee is 1%
Is there any plans to add some kind of memory tweak like the one T-Rex has?
GMiner v2.45 available for download
v2.45
+ improved performance on Ethash for Nvidia and AMD GPUs
+ improved performance on KAWPOW for Nvidia GPUs
+ decreased stale shares rate on Nvidia GPUs for Ethash and KAWPOW algorithms
+ removed #3 kernel and added 2 energy efficiency kernels (#5 and #6) on Ethash for Nvidia GPUs
+ improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels
+ optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers (use --pec 0 to exclude memory leaks completely)
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.45
+ improved performance on Ethash for Nvidia and AMD GPUs
+ improved performance on KAWPOW for Nvidia GPUs
+ decreased stale shares rate on Nvidia GPUs for Ethash and KAWPOW algorithms
+ removed #3 kernel and added 2 energy efficiency kernels (#5 and #6) on Ethash for Nvidia GPUs
+ improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels
+ optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers (use --pec 0 to exclude memory leaks completely)
Ethash fee is 0.65%
KAWPOW fee is 1%
Hi,
I wanted to try CuckooCortex with my 1070 Ti
But it crashes
miner.exe -d 0 -i 1 --algo cortex --server ctxc.2miners.com:2222 --user 0x321ae4016a6397ee004b3f5f9e6c0a0c1915a05d
------------------------------------------------------------------
15:50:32 Failed to initialize miner on GPU0: MSI GeForce GTX 1070 Ti 8GB [0000:03:00.0]: out of memory
15:50:32 No devices for mining
Same with lolminer (just to test)
How my 1070 Ti 8Gb is not enough ?
I wanted to try CuckooCortex with my 1070 Ti
But it crashes
miner.exe -d 0 -i 1 --algo cortex --server ctxc.2miners.com:2222 --user 0x321ae4016a6397ee004b3f5f9e6c0a0c1915a05d
------------------------------------------------------------------
15:50:32 Failed to initialize miner on GPU0: MSI GeForce GTX 1070 Ti 8GB [0000:03:00.0]: out of memory
15:50:32 No devices for mining
Same with lolminer (just to test)
How my 1070 Ti 8Gb is not enough ?
Just tried this miner for the first time after done years and about 5 hours after it was running, I got a warning from Windows security regarding a Win32/Detplock threat.
It surely can't be just me?
It surely can't be just me?
[/quote]
Is it possible to add a 16GB or 24GB solver or run duplicate 8gb or 11gb solvers simultaneously for the most recent, higher memory, rx and Nvidia cards?
Seems there is a lot of potential being lost in these higher memory models by only using 11gb, etc. solver?
Thank you for your work.
[/quote]
I had the same question. But i know the answer is no. Is there some work around to this wasted memory?
GMiner v2.44 available for download
v2.44
+ fixed compatibility issues with ezil.me pool when no rig name passed (this bug appeared in v2.43)
v2.44
+ fixed compatibility issues with ezil.me pool when no rig name passed (this bug appeared in v2.43)
Is it possible to add a 16GB or 24GB solver or run duplicate 8gb or 11gb solvers simultaneously for the most recent, higher memory, rx and Nvidia cards?
Seems there is a lot of potential being lost in these higher memory models by only using 11gb, etc. solver?
Thank you for your work.
GMiner v2.44 available for download
v2.44
+ fixed compatibility issues with ezil.me pool when no rig name passed (this bug appeared in v2.43)
v2.44
+ fixed compatibility issues with ezil.me pool when no rig name passed (this bug appeared in v2.43)
GMiner v2.43 available for download
v2.43
+ improved compatibility with Ethash pools (shardpool.io)
+ improved handling of device freezing
+ improved auto-tuning
+ added two kernels for Ethash, miner support 5 kernels for Nvidia GPUs, miner automatically select optimal kernel, also you can select specific kernel by --oc parameter (check readme.txt for more details)
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.43
+ improved compatibility with Ethash pools (shardpool.io)
+ improved handling of device freezing
+ improved auto-tuning
+ added two kernels for Ethash, miner support 5 kernels for Nvidia GPUs, miner automatically select optimal kernel, also you can select specific kernel by --oc parameter (check readme.txt for more details)
Ethash fee is 0.65%
KAWPOW fee is 1%
Jump to: