thank you
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 97. (Read 306650 times)
v.1.32 pool hashrate 44, miner hashrate 64... (1080Tis, win10) will this be addressed anytime soon?
thank you
thank you
Got same error as qexing:
Segmentation fault on --list_devices and just try to mine miner does say "No device found".
System is Ubuntu 18.04.1, Driver AMD 18.30, clinfo lists both cards and lolMiner running Beam just fine on them.
Segmentation fault on --list_devices and just try to mine miner does say "No device found".
System is Ubuntu 18.04.1, Driver AMD 18.30, clinfo lists both cards and lolMiner running Beam just fine on them.
lastest update contains bug with fidelity, it will show worst performance on pool side, please don't use 1.32 for cuckoocycle algorithms, use 1.31 instead.
v1.32 only good for AMD miners
v1.32 only good for AMD miners
Hi,
With NiceHash 1.0.8.0.12 / Gminer, it is unable to stop the client and restarting the client crashes the system!
Is this a known problem!?
With Windows 7 Professional
Thanks,
Marco
With NiceHash 1.0.8.0.12 / Gminer, it is unable to stop the client and restarting the client crashes the system!
Is this a known problem!?
With Windows 7 Professional
Thanks,
Marco
GMiner v1.32 available for download
v1.32
+ improved performance for Grin29/Aeternity
+ added AMD support for Beam
+ --list_devices command to show available devices
v1.32
+ improved performance for Grin29/Aeternity
+ added AMD support for Beam
+ --list_devices command to show available devices
Tried 1.32 version with AMD RX570 in Linux system, list devices error:
./miner --list_devices
Segmentation fault
and when mining Beam with AMD devices, it gives me:
No device found
While OpenCL and AMD driver is correctly installed, clinfo can list my GPUs.
GMiner v1.32 available for download
Hi, I get 'Error on GPU0: unspecified launch failure' error when mining Beam on NVIDIA 1080 (410.66 driver) with 1.31 Linux version.
I tried 1.32 version, GMiner doesn't report error at the first time, but only mine at 0.4 Sol/s,
then I restart GMiner, the 'unspecified launch failure' error comes again.
It's wired that both 1.31 and 1.32 version works fine when mining Grin on NVIDIA 1080 card.
same here
Miner shows better hashrate but Pool hashrate noticeably went downhill... Im on sparkpool mining Grin29....
I edited my post above... but I am mining BEAM on AMD.
The miner I was referring to is lolminer.
The miner I was referring to is lolminer.
Thank you
I edited my post above... but I am mining BEAM on AMD.
The miner I was referring to is lolminer.
The miner I was referring to is lolminer.
Miner is reporting slightly lower numbers than the leading competitor.
I do like the stats being displayed. It has helped to reduce overall wattage.
It would be nice if bus ID and fan speed could be displayed in the stats. I'm running Vegas.
I'll run this for awhile and compare with poolside results.
I do like the stats being displayed. It has helped to reduce overall wattage.
It would be nice if bus ID and fan speed could be displayed in the stats. I'm running Vegas.
I'll run this for awhile and compare with poolside results.
Who is the leading competitor?
Awesome thank you so much for the update to the miner. Appreciate much!!!
Miner is reporting slightly lower numbers than the leading competitor (at least for BEAM).
I do like the stats being displayed. It has helped to reduce overall wattage.
It would be nice if bus ID and fan speed could be displayed in the stats. I'm running Vegas.
I'll run this for awhile and compare with poolside results.
I do like the stats being displayed. It has helped to reduce overall wattage.
It would be nice if bus ID and fan speed could be displayed in the stats. I'm running Vegas.
I'll run this for awhile and compare with poolside results.
Having trouble with this miner on Grin29 crashing my 1080 ti rigs after a little while...Seems any algo on this miner crashes my 2080ti's instantly...Using 80GB for Virtual memory and very conservative clocks...Thoughts?
Doesn't work with AMD Fury cards...
I see higher wattage now, not sure yet about h\r at pool though
upd. ok, I can confirm h\r dropped at pool for me too, rolling back to 1.31
Same at nanopool. Fake hashrate, slower than 1.31 and lower wattage.
I see higher wattage now, not sure yet about h\r at pool though
upd. ok, I can confirm h\r dropped at pool for me too, rolling back to 1.31
it seems much slower on grin pool side (tested on f2pool only, and it's not reject rate shown around 2% pool side)
Same at nanopool. Fake hashrate, slower than 1.31 and lower wattage.
can we ever expect 5gb solvers ? to be able to run 1060 6gb on win10 , bminer did it and it works just fine , but would prefer to use yours.
glad its not just me
Posted in their telegram group but ive been reporting this for a while now and doesnt get noticed.
Posted in their telegram group but ive been reporting this for a while now and doesnt get noticed.
1080ti: 7.6 G/S on grin29 win10 latest drivers, @+135 core +400 mem 75% power => quite good
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good
RX480 (4 gb) & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)
(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good
RX480 (4 gb) & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)
(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)
it seems much slower on grin pool side (tested on f2pool only, and it's not reject rate shown around 2% pool side)
GMiner v1.32 (Windows/Linux) added to https://www.minermonitoring.com/
Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
Jump to: