GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 98.

cirlama

jr. member

Activity: 156

Merit: 1

Quote from: cirlama on February 14, 2019, 02:35:56 PM

1080ti: 7.6 G/S on grin29 win10 latest drivers, @+135 core +400 mem 75% power => quite good
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good

RX480 (4 gb) & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)

(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)

it seems much slower on grin pool side (tested on f2pool only, and it's not reject rate shown around 2% pool side)

Juniormkl

newbie

Activity: 155

Merit: 0

GMiner v1.32 (Windows/Linux) added to https://www.minermonitoring.com/

Join our discord https://discord.gg/aGGaeqq

also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

Zminer777

member

Activity: 488

Merit: 37

Quote from: Quake4 on February 14, 2019, 02:46:29 PM

Please, add (-d) --devices AMD or --devices NVIDIA (without key (-d) --devices select to mine all supported devices)
To select proper devices.

Will do it in next update

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: Zminer777 on February 14, 2019, 02:11:13 PM

+ added AMD support for Beam

Please, add (-d) --devices AMD or --devices NVIDIA (without key (-d) --devices select to mine all supported devices)
To select proper devices.

Dripac

newbie

Activity: 71

Merit: 0

Because you dont read

Quote

On Windows 10, some algorithms may not run due to lack of memory or demonstrate worse performance, because the miner uses the implementation for less memory.

cirlama

jr. member

Activity: 156

Merit: 1

1080ti: 7.6 G/S on grin29 win10 latest drivers, @+135 core +400 mem 75% power => quite good
1070: 4.5 G/S on grin29 win10 latest drivers, @+165 core +550 mem 75% power => quite good

RX480 (4 gb) & RX580 (8 gb) on Beam win10 18.5.1 drivers, @1300 & 1350 core give 12 & 13 sol/s => similar to lolMiner 0.7
(but my bios are tweaked for eth)

(just for info: grin31 on 11 GB 1080 ti gives 0.05 G/S, I don't know why...)

Zminer777

member

Activity: 488

Merit: 37

GMiner v1.32 available for download

v1.32
+ improved performance for Grin29/Aeternity
+ added AMD support for Beam
+ --list_devices command to show available devices

Please use Windows 7 or Linux, because Windows 10 reserves a lot of memory.
On Windows 10, some algorithms may not run due to lack of memory or demonstrate worse performance, because the miner uses the implementation for less memory.

Performance on stock GPU settings:
Grin29(Cuckaroo29):
Palit GTX 1060 JetStream 6GB ~2.8 G/s
Palit GTX 1070 Ti JetStream 8GB ~4.8 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.0 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~7.5 G/s
MSI RTX 2070 Armor 8GB ~6.7 G/s
MSI RTX 2080 DUKE 8GB ~8.0 G/s

Aeternity(Cuckoo29):
Palit GTX 1060 JetStream 6GB ~3.0 G/s
Palit GTX 1070 Ti JetStream 8GB ~5.1 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.4 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~8.0 G/s
MSI RTX 2070 Armor 8GB ~7.3 G/s
MSI RTX 2080 DUKE 8GB ~8.5 G/s

Beam(Equihash150,5):
Sapphire VEGA 56 8GB ~18 Sol/s
PowerColor RX580 Red Devil 8GB ~12 Sol/s

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw
Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A
GitHub: https://github.com/develsoftware/GMinerRelease/releases

UPDATE: lastest update contains bug with fidelity, please don't use 1.32 for cuckoocycle algorithms, use 1.31 instead.

supervitek

newbie

Activity: 147

Merit: 0

Hi guys,

I'm mining Beam and one of the cards is used for the system (Windows 8.1). Any idea how can I avoid windows freeze by setting single card intensity lower? Or is it any way to set total intensity lower?

Thank you!

grib69

newbie

Activity: 2

Merit: 0

gminer 1.31
pool - nicehash
algo - equihash150_5
os - win10
drv - 418.81, 418.91

gtx 1080ti - all good
gtx 1070 - "illegal memory access was encountered" random card

maryoush

newbie

Activity: 7

Merit: 0

1080ti evga ftw3
this is what i've got at the moment - just started at nicehash

[INFO] [2019-02-14T12:35:38 01:00] Total 2.77 G/s Accepted shares 30 Rejected shares 2
[INFO] [2019-02-14T12:35:47 01:00] Received new job 1802124025585
[INFO] [2019-02-14T12:35:56 01:00] Accepted share
[INFO] [2019-02-14T12:36:02 01:00] Received new job 1802124025685
[INFO] [2019-02-14T12:36:06 01:00] Accepted share
[INFO] [2019-02-14T12:36:07 01:00] Received new job 1802124025820
[INFO] [2019-02-14T12:36:08 01:00] [GPU 0] Speed: 1.40 G/s Fidelity 0.877 Temp: 62C Fan: 40% Power: 191W 0.01 G/J
[INFO] [2019-02-14T12:36:08 01:00] [GPU 1] Speed: 1.41 G/s Fidelity 0.981 Temp: 54C Fan: 40% Power: 189W 0.01 G/J
[INFO] [2019-02-14T12:36:08 01:00] Total 2.80 G/s Accepted shares 32 Rejected shares 2
[INFO] [2019-02-14T12:36:09 01:00] Received new job 1802124025967
[INFO] [2019-02-14T12:36:19 01:00] Received new job 1802124026112

DarkMoose

newbie

Activity: 3

Merit: 0

When will Gminer be updated to support Grin mining at 1060 (6 GB) under Windows 10? Other miners can already do this.

od1n

jr. member

Activity: 30

Merit: 1

HiveOS with Gminer 1.31
6x GTX1070 8GB [Core+100|MEM+0|PL85W]

Running with C31 at 2.2 gps but I don't geht accepted shares at sparkpool Huh

C29 is running at 22.4 gps

Cryptotourist

hero member

Activity: 1204

Merit: 755

Homo Sapiens Bitcoinerthalensis

Quote from: Ginooo on February 14, 2019, 02:26:00 AM

Quote from: Cryptotourist on February 14, 2019, 02:16:41 AM

Quote from: bourbonmorning on February 13, 2019, 04:36:26 PM

Guys, what is your hashrate on c31 using 1080ti on Windows?

~0.67 G/s. Almost as expected from v1.3.1 release notes.

compared with bminer, it's too slow~

For Windows?
Cos bminer 14.3.1 will not run on windows for c31. And on Linux it's unstable.
Unless you are only talking about 2080ti.

BTCspace

hero member

Activity: 952

Merit: 501

any plan to support 2080Ti for C31?

thanks!

Ginooo

newbie

Activity: 14

Merit: 0

Quote from: Cryptotourist on February 14, 2019, 02:16:41 AM

Quote from: bourbonmorning on February 13, 2019, 04:36:26 PM

Guys, what is your hashrate on c31 using 1080ti on Windows?

~0.67 G/s. Almost as expected from v1.3.1 release notes.

compared with bminer, it's too slow~

Cryptotourist

hero member

Activity: 1204

Merit: 755

Homo Sapiens Bitcoinerthalensis

Quote from: bourbonmorning on February 13, 2019, 04:36:26 PM

Guys, what is your hashrate on c31 using 1080ti on Windows?

~0.67 G/s. Almost as expected from v1.3.1 release notes.

qexing

newbie

Activity: 7

Merit: 0

Hi:

I'm using GMiner 13.1 in Linux 4.15 kernel, with nvidia 410.66 version driver and CUDA 10,
it gives me 'Error on GPU0: unspecified launch failure' error when mining Beam with my NVIDIA 1080 8GB card:

Code:

Error on GPU0: unspecified launch failure
Stopped Mining on GPU0
Miner terminated, watchdog will restart process after 10 seconds

In the meantime, NVIDIA driver reports:

Code:

resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller _nv001126rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 3, TPC 0): Out Of Range Address
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x51c648=0x1e000e 0x51c650=0x20 0x51c644=0xd3eff2 0x51c64c=0x17f
NVRM: Xid (PCI:0000:01:00): 43, Ch 00000008, engmask 00000101

while GMiner works fine with NVIDIA 1060 3GB card, using the same Linux system,
and seems it isn't my 1080 issue, cause GMiner works fine if I mine Grin with 1080 card

Really thanks

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

I created a video guide on mining Beam w/ gminer -- I illustrate how to mine Beam on linux w/ smos as well as on Windows -- I have downloadable preset config files included as well -- you can simply download and swap my beam address w/ yours and you're off hashing away on leafpool

https://www.youtube.com/watch?v=tqPEd_3tCDU

florin.adrian

newbie

Activity: 1

Merit: 0

hello , is there an discord or telegram channel for Gminer it would help a lot for the development of new innovation in software because is much easier and faster to communicate?

stolarzz

newbie

Activity: 111

Merit: 0

Quote from: sp_ on February 13, 2019, 12:16:34 PM

Quote from: melpheos on February 13, 2019, 10:00:43 AM

requires 7.4GB VRam, will work on 8GB cards under Linux and Windows 7

Works on Windows 8...

Windows 8 support 12 GPUs?

Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 98. (Read 307141 times)