Prepare for block 2600, join the new pool.
1% Fee. Prop Payout.
http://gpu.verters.com
edit: id10T error :p
Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 201. (Read 421421 times)
Sunday Reboot:
Micryon came up with the idea that we should launch instead a day prior to the official launch, but only have block rewards at 1 GPUC for the first 2600 blocks. This allows for people to ramp up the network hash gradually to avoid forking, allows people to tweak their rigs on the actual network, and alleviates all the traffic to the wallet downloads.
That is until the 2601 block. then fork, wallets etc.. not going to input a lot of info here, just glad someone is finally thinking, however; you need to work on the result, going to be interesting to watch from the side lines.
What am I missing, what result? Has something gone wrong that I am not aware of? What the effin eff? Why no one talking to me???
Sunday Reboot:
Micryon came up with the idea that we should launch instead a day prior to the official launch, but only have block rewards at 1 GPUC for the first 2600 blocks. This allows for people to ramp up the network hash gradually to avoid forking, allows people to tweak their rigs on the actual network, and alleviates all the traffic to the wallet downloads.
That is until the 2601 block. then fork, wallets etc.. not going to input a lot of info here, just glad someone is finally thinking, however; you need to work on the result, going to be interesting to watch from the side lines.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Thanks. I have two R9 290x, both water cooled. What kind of kh/s should I be getting?
I've been at this for over six hours, but at the moment I'm like relaxed with such low kh/s, because the frustration the last 6 hours or so had been so intense, that I actually wanted to punch the wall. That's really rare for me. The same last week.
I saw it. I deleted the .bin files. still the same error. I'm going to try to remove the GPUs and put them in my other computer. I tried running Vertminer there, integrated graphics, and at least it was running. I just don't understand what's going on with my rig. Tried it on Windows 7 and 8, same problems.
try a bare bones start delete everything after the -p password part all bins and run see what tc value it sets in new bin file name thats your starting thread concurrency
https://gpu.suprnova.cc
The Day 1 GPU Pool
No fee
DDoS Proof
VDIff + Stratum
Look at our "Getting Started" Category on the left to configure/Download your miner
Just few more hundred blocks:
https://gpu.suprnova.cc/index.php?page=statistics&action=pool
C'Mon guys ! Lets get this coin finally rollin' !
The Day 1 GPU Pool
No fee
DDoS Proof
VDIff + Stratum
Look at our "Getting Started" Category on the left to configure/Download your miner
Just few more hundred blocks:
https://gpu.suprnova.cc/index.php?page=statistics&action=pool
C'Mon guys ! Lets get this coin finally rollin' !
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Thanks. I have two R9 290x, both water cooled. What kind of kh/s should I be getting?
I've been at this for over six hours, but at the moment I'm like relaxed with such low kh/s, because the frustration the last 6 hours or so had been so intense, that I actually wanted to punch the wall. That's really rare for me. The same last week.
I saw it. I deleted the .bin files. still the same error. I'm going to try to remove the GPUs and put them in my other computer. I tried running Vertminer there, integrated graphics, and at least it was running. I just don't understand what's going on with my rig. Tried it on Windows 7 and 8, same problems.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer --scrypt-vert -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367 -u regtable.regtable -p password -w 256 -I 20 --lookup-gap 2 --gpu-powertune 20 --thread-concurrency 27400
core clock 900 mem clock 1400 on club 3d jus change pool details doing 400k each tuned down for temps if u want to boost it go core clock at 1024 mem 1500 powertune 50 and intensity 19 on cards otherwise ull poop
I tried your settings, but got gpu failure, disabling, for both GPUs.
Just make sure it's not my pool, I'm going to try to run it with your settings exactly how you put them. So it'll run on your pool. Just to see if it works.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Your could get more kh/s out of a head of cabbage then 7kh/s? I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Try this board. It help me out.
https://bitcointalksearch.org/topic/ann-new-thekev-vertminer-ultimate-vertminer-guide-for-windows-466867
Thanks. I saw that it said something about a conf file. Do I have to create one of those? I hope that's the problem.
Basically for tuning CGminer you want to start with clocks that other ppl have put on the web on the litecoin mining hardware wiki.
And then tune intensity and thread concurrency and threads from there. Once you have good hash and 0 HW errors you can start messing with the clocks again to see if you can get it higher.
But these simple truths hold for any card...It depends on the card whether it will hash well or be stable on -g 1 or -g 2
-g 1 goes with high thread concurrencies (shaders*6 or more) and high intensity (18 or more)
-g 2 goes with low thread concurrencies (shaders*5 or less) and low intensity (typically 13)
If you are having HW errors with any of those 2 tunings then keep trying higher thread concurrencies.
My cards include 6950's 6970's 7950' 7970's and 280X's and that has worked out pretty well for all of them.
That is for cgminer though....
You have to mine with coin with vertminer? It is an Nfactor coin? oh well.
And then tune intensity and thread concurrency and threads from there. Once you have good hash and 0 HW errors you can start messing with the clocks again to see if you can get it higher.
But these simple truths hold for any card...It depends on the card whether it will hash well or be stable on -g 1 or -g 2
-g 1 goes with high thread concurrencies (shaders*6 or more) and high intensity (18 or more)
-g 2 goes with low thread concurrencies (shaders*5 or less) and low intensity (typically 13)
If you are having HW errors with any of those 2 tunings then keep trying higher thread concurrencies.
My cards include 6950's 6970's 7950' 7970's and 280X's and that has worked out pretty well for all of them.
That is for cgminer though....
You have to mine with coin with vertminer? It is an Nfactor coin? oh well.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer --scrypt-vert -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367 -u regtable.regtable -p password -w 256 -I 20 --lookup-gap 2 --gpu-powertune 20 --thread-concurrency 27400
core clock 900 mem clock 1400 on club 3d jus change pool details doing 400k each tuned down for temps if u want to boost it go core clock at 1024 mem 1500 powertune 50 and intensity 19 on cards otherwise ull poop
I tried your settings, but got gpu failure, disabling, for both GPUs.
Just make sure it's not my pool, I'm going to try to run it with your settings exactly how you put them. So it'll run on your pool. Just to see if it works.
It did not work either. Very strange.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Your could get more kh/s out of a head of cabbage then 7kh/s? I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Try this board. It help me out.
https://bitcointalksearch.org/topic/ann-new-thekev-vertminer-ultimate-vertminer-guide-for-windows-466867
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer --scrypt-vert -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367 -u regtable.regtable -p password -w 256 -I 20 --lookup-gap 2 --gpu-powertune 20 --thread-concurrency 27400
core clock 900 mem clock 1400 on club 3d jus change pool details doing 400k each tuned down for temps if u want to boost it go core clock at 1024 mem 1500 powertune 50 and intensity 19 on cards otherwise ull poop
I tried your settings, but got gpu failure, disabling, for both GPUs.
Just make sure it's not my pool, I'm going to try to run it with your settings exactly how you put them. So it'll run on your pool. Just to see if it works.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Thanks. I have two R9 290x, both water cooled. What kind of kh/s should I be getting?
I've been at this for over six hours, but at the moment I'm like relaxed with such low kh/s, because the frustration the last 6 hours or so had been so intense, that I actually wanted to punch the wall. That's really rare for me. The same last week.
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Thanks. I have two R9 290x, both water cooled. What kind of kh/s should I be getting?
I've been at this for over six hours, but at the moment I'm like relaxed with such low kh/s, because the frustration the last 6 hours or so had been so intense, that I actually wanted to punch the wall. That's really rare for me. The same last week.
I get almost 50% exactly from my r9 290. So I assume the same for the 290x. what are you getting?
Someone looking for settings for 7870 earlier this is what I use and I get about 171 k/hash per card. Mine are the 7870xt not sure how much difference that makes.
core 840 mem 1500 using afterburner
vertminer.exe --scrypt-vert -o stratum+tcp://gpu.hashfever.com:3262 -u xxxx.xxxx -p xxxxx -I 12 -g 2 -w 512 --thread-concurrency 4096
core 840 mem 1500 using afterburner
vertminer.exe --scrypt-vert -o stratum+tcp://gpu.hashfever.com:3262 -u xxxx.xxxx -p xxxxx -I 12 -g 2 -w 512 --thread-concurrency 4096
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
Thanks. I have two R9 290x, both water cooled. What kind of kh/s should I be getting?
I've been at this for over six hours, but at the moment I'm like relaxed with such low kh/s, because the frustration the last 6 hours or so had been so intense, that I actually wanted to punch the wall. That's really rare for me. The same last week.
P2Pool: http://96.126.121.117:9404
What is P2Pool?
P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS (set up a few nodes) and coins are sent directly to your wallet.
How do I start mining?
Fine Tuning:
It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:
Hash Rate * .0000011641
So if your hash rate is 1930 KHash and your wallet address was GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa, you'd want to set it up like so:
(1930 * .0000011641) = 0.002246713
Resulting in...
GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa+0.002246713
Vertminer Tuning:
What is P2Pool?
P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS (set up a few nodes) and coins are sent directly to your wallet.
How do I start mining?
- Point your miner to: stratum+tcp://96.126.121.117:9404
- Use your GPUCoin address as the user (you can set anything as the password, it doesn't matter).
Fine Tuning:
It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:
Hash Rate * .0000011641
So if your hash rate is 1930 KHash and your wallet address was GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa, you'd want to set it up like so:
(1930 * .0000011641) = 0.002246713
Resulting in...
GNTzNHAxz3fVoZiVmBFbraUwN9GQEM5XTa+0.002246713
Vertminer Tuning:
- Intensity: <= 19 (or lower - you want to maximize the responsiveness of your miner)
- Queue: 0
- Scantime: 5
We now have 4 small exchanges trading these coins and a Trading Thread with several sellers already posted, links to exchanges in the thread.
Only 660 Blocks to go!!!
New TRADING THREAD: https://bitcointalksearch.org/topic/buy-sell-gpucoin-trading-thread-508026
Only 660 Blocks to go!!!
New TRADING THREAD: https://bitcointalksearch.org/topic/buy-sell-gpucoin-trading-thread-508026
Ok, for those who were here earlier when I couldn't get vertminer to work. I installed Windows 7 on a new hard drive. I ran vertminer, and it became blank, but there since to be some activity because the whole display has become slugglish.
I checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
which 290x do you have? i may be able to help. p.s i feel for youI checked the pool, and I'm getting 7kh/s. That's really bad right? Considering that I'm using two 290x.
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer --scrypt-vert -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367 -u regtable.regtable -p password -w 256 -I 20 --lookup-gap 2 --gpu-powertune 20 --thread-concurrency 27400
core clock 900 mem clock 1400 on club 3d jus change pool details doing 400k each tuned down for temps if u want to boost it go core clock at 1024 mem 1500 powertune 50 and intensity 19 on cards otherwise ull poop
Basically try (shaders*n)+/- 1
So the 290x has 2816 shaders.
I would start with 22529 or 22527 which is n=8. Go up or down from there until you are stable.
Hope that helps.
Phad
So the 290x has 2816 shaders.
I would start with 22529 or 22527 which is n=8. Go up or down from there until you are stable.
Hope that helps.
Phad
Jump to: