Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 51. (Read 97274 times)
wtf is going on with these losers? Paypal doesn't charge 10%, I do a ton of business with china, worst case they get dinged for 3% Closed the orders, even though they haven't shipped more than a few miners out, and don't answer messages?? Yay, another company stealing from people...
I Ordered one at 8.1. and one at 9.1.
Today I contact them over skype if they send miners and here is answer: "2 miners have been shipped to HK."
They refund me in 3 minute
Today I contact them over skype if they send miners and here is answer: "2 miners have been shipped to HK."
They refund me in 3 minute
paiyed in 14.01 why I`m not in order list?? wanna refund.
I see the units are coming in are silver if you like you can get stickers from me check it out so you can decorate it a bit. https://bitcointalksearch.org/topic/bitcoin-bitcoin-miner-sha-256-stickers-418199 I can cut them out any size you like let me know.
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
Looks like these units are going for below 2 btc now with no PS.
Reference?
Thanks bitterdog
Yes the same blades are being supplied to multiple system vendors.....so likely one fab shop and then box buildings putting heating sinks etc......
But yes this link as well as someothere direct sales show price now below 2 BTC without PS
Which makes sense even bitmine has drop as the diff has taken payback down and sales have slow at the price points and delays.
Lets see its the 16 if they shipped them when they said there were in stock I would have them now....and be mining.
Now just have to hope for a tracking number
I do not know how to use skype any one able to contact them for the tracking numbers?
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
Looks like these units are going for below 2 btc now with no PS.
Reference?
Beat me to it, but I was going to say check reply #101 in the referenced thread, apparently the factory invoices and GB coordinator has no control of price (and the most recent potential customer was invoiced over $2400)
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
Looks like these units are going for below 2 btc now with no PS.
Reference?
Since when is $2200 (w/o PSU) under 2 BTC?
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
Looks like these units are going for below 2 btc now with no PS.
Reference?
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
Looks like these units are going for below 2 btc now with no PS.
Reference?
Arrived and spent most of the evening trying to get it to work. One module is hashing away and the other is none responsive. Installed new PSUs 750w each. The non-responsive one does not seem to be turning on the second PSU at all. The good one draws 450w at the wall. I might try shorting the 4th and 5th plugs in the 24pin to see if that will get the second module working.
Overall, it was okay to setup, it's really compact. It reminds me more of one of those Avalon minis. I will post some pics tomorrow.
Edit: if anyone could use the 220v PSUs, let me know. I have no use for them at the present.
Overall, it was okay to setup, it's really compact. It reminds me more of one of those Avalon minis. I will post some pics tomorrow.
Edit: if anyone could use the 220v PSUs, let me know. I have no use for them at the present.
We saw the same thing.... one side not firing up.... if you open the case one power supply goes directly to the board which contains the USB connection to the TP-Link. Fire this side up first, once it is up and running (Fan spinning), start the other side with the slaved board. Check the ribbon cables for good connections beforehand.
I intend to see if I can get the whole unit running off of a single 1350W power supply this weekend.
Wow they at least closed it.
Looks like these units are going for below 2 btc now with no PS.
They got us for 2.2 and 2.4 now worth only 1.95
And dropping 10% minimum each week and on top of that the quality seems to have dropped like a rock based on comments from recent recipiants.
Too bad....I like the build quaility and look now I am really wondering.
Will let anyone know when I know anything on orders in process
Looks like these units are going for below 2 btc now with no PS.
They got us for 2.2 and 2.4 now worth only 1.95
And dropping 10% minimum each week and on top of that the quality seems to have dropped like a rock based on comments from recent recipiants.
Too bad....I like the build quaility and look now I am really wondering.
Will let anyone know when I know anything on orders in process
Arrived and spent most of the evening trying to get it to work. One module is hashing away and the other is none responsive. Installed new PSUs 750w each. The non-responsive one does not seem to be turning on the second PSU at all. The good one draws 450w at the wall. I might try shorting the 4th and 5th plugs in the 24pin to see if that will get the second module working.
Overall, it was okay to setup, it's really compact. It reminds me more of one of those Avalon minis. I will post some pics tomorrow.
Edit: if anyone could use the 220v PSUs, let me know. I have no use for them at the present.
Overall, it was okay to setup, it's really compact. It reminds me more of one of those Avalon minis. I will post some pics tomorrow.
Edit: if anyone could use the 220v PSUs, let me know. I have no use for them at the present.
Which Skype address is it?
if you want to check your order or need refund please contact Skype: btmine.cs , Do not send Email and PM , it is too slow , Please use Skype
I would like to check on my order please. Ordered on the 7th, payment sent via email (paypal).
I dont have skype, sorry
Please tell me my tracking number!
Does anyone have any detailed info on how to plug in the power connectors? Each board is labeled as having 1 ATX power connector, 1 EPS power connector, and 2 PCI-E power connectors (total of 2xATX, 2xEPS, 4xPCI-e)... but the plug for *both* the EPS and PCI-E connectors is a EPS plug. ?? Obviously you can't put a PCI-E power in there without forcing it, and they're not compatible anyways. I really don't want to fry this thing...
How are these supposed to be connected?
How are these supposed to be connected?
did you get this resolved? do you have the old or new version?
Why can't we get any help from the manufacturer on this? This has been asked at least a half a dozen times already?
Some pictures and instructions would be nice!They are waiting on the tracking numbers for the instructions that is in shipping.
Does anyone have any detailed info on how to plug in the power connectors? Each board is labeled as having 1 ATX power connector, 1 EPS power connector, and 2 PCI-E power connectors (total of 2xATX, 2xEPS, 4xPCI-e)... but the plug for *both* the EPS and PCI-E connectors is a EPS plug. ?? Obviously you can't put a PCI-E power in there without forcing it, and they're not compatible anyways. I really don't want to fry this thing...
How are these supposed to be connected?
How are these supposed to be connected?
did you get this resolved? do you have the old or new version?
Why can't we get any help from the manufacturer on this? This has been asked at least a half a dozen times already?
Some pictures and instructions would be nice! Does anyone have any detailed info on how to plug in the power connectors? Each board is labeled as having 1 ATX power connector, 1 EPS power connector, and 2 PCI-E power connectors (total of 2xATX, 2xEPS, 4xPCI-e)... but the plug for *both* the EPS and PCI-E connectors is a EPS plug. ?? Obviously you can't put a PCI-E power in there without forcing it, and they're not compatible anyways. I really don't want to fry this thing...
How are these supposed to be connected?
How are these supposed to be connected?
did you get this resolved? do you have the old or new version?
I ordered at 6:58pm est time Jan 6th. Have still not received a tracking number. I guess they counted my order as a Jan 7th order (because of the time difference). Miners were falsely advertised as in stock, and that it would ship in 2 days, and I confirmed this with btmine before ordering. It has now been 9 days since I ordered, still no tracking number from btmine, just one excuse after another.
I paid around the same time with Paypal. Today Paypal told me it was shipped. Yesterday night I emailed them and they said that the Shipping agent from PRC to HK had not given them a tracking number. I'm pretty sure the ones that are marked shipped well be getting to us I just don't know when. I"m on a roller coaster ride with these guys. They give me just enough information to not be pissed. Then turn around and piss me off some more. The only thing I can be pissed about is the length of time it is taking to get the miners. BTmine update your original post.
perfect example of why I opt to push my BTC towards Bitmain..
Jump to: