Topic: [GROUP BUY WORLDWIDE]BTMine v1 Miner 200GH/s BTC 2.4 - page 58. (Read 97274 times)
Reserved.
This is definitely not a scam. I received my two units last night, and they are both hashing away in the garage just fine at roughly 220GH/s each. They are certainly loud and my units were poorly assembled. Since they are in the garage, the noise is bearable. On the shoddy cases, it's not a huge deal, as they are miners, not artwork.
As far as ease of setup, it was a little tricky getting two PSU's into the case and plugged in - very tight. But once they had power, connecting to the network and setting up cgminer took 5 minutes. Also, they run a similar OpenWRT linux to the AntMiner S1, so I was able to SSH into the machine, set up api-allow and see the status on CGRemote. Easy-peasy.
I'm running them with two Corsair CX750 PSU's each, and they draw about 950Watts from the wall at stock 1400Mhz. I've tried to run them at 1500Mhz and get roughly 230-235GH/s but power draw increases to 1050W or so. I'm not sure if it's worth to overclock given the ~5% increase in hash rate but ~10% increase in power consumption. Any thoughts from others?
Overall I'm happy with the purchase and hope to make some ROI in a couple of months. My concern is power use, as my rate here in CA is very high (0.35/kwh!!!). I might need to sell them in a month or two to someone with cheap power to maximize my return... Anybody want a 6week preorder at $1500 per unit?
As far as ease of setup, it was a little tricky getting two PSU's into the case and plugged in - very tight. But once they had power, connecting to the network and setting up cgminer took 5 minutes. Also, they run a similar OpenWRT linux to the AntMiner S1, so I was able to SSH into the machine, set up api-allow and see the status on CGRemote. Easy-peasy.
I'm running them with two Corsair CX750 PSU's each, and they draw about 950Watts from the wall at stock 1400Mhz. I've tried to run them at 1500Mhz and get roughly 230-235GH/s but power draw increases to 1050W or so. I'm not sure if it's worth to overclock given the ~5% increase in hash rate but ~10% increase in power consumption. Any thoughts from others?
Overall I'm happy with the purchase and hope to make some ROI in a couple of months. My concern is power use, as my rate here in CA is very high (0.35/kwh!!!). I might need to sell them in a month or two to someone with cheap power to maximize my return... Anybody want a 6week preorder at $1500 per unit?
Drama Queen.
Reserved.
They said that you should not over clock. It will mess up the PCU that came with it. What about the people that got the the machine without PCU? Next question who here has overclocked? If anyone has done so please let us know and if you can post a how to?... Also please post that you have recieved your miner once you got it. It makes for less hating going on..
Paied for one miner. Waiting for your reply.
I had my 2 delayed ones refunded via paypal as well. Keeping the ones I ordered via BTC for now. Took less than 5 minutes.
you realy love your Porsche(s), do you?
Love mine but it's a money pit from hell
My brother learned from me lol, kept his 07 at 870rwhp on stock motor LOL!Miaviator I know it comes off bad but I'm glad for what you do to help people, but sometimes there is a point don't have to spam it. Sometimes though it's a losing battle.... Trust me I've tried before to help people in other industries.
you realy love your Porsche(s), do you?
I was given a refund on my last 2 units I was put on delay for. I have 4 units from them total now. All are up and operational and currently mining very well. I am running no overclocking on any of the units right now because they all came online last night and are 15 minutes away at my shop since it's got cooling for our hang out area that's a bit overkill ... 800 sqft and a 3 ton unit.
Screen shot was taken randomly 5 minutes ago.
Powell 1 = USB Sticks
Powell 2 = Asic Cube
Powell 3 = Asic Cube
Powell 4-7 = BTMiner v1 on stock clock
The people at BTMiner and I talked and the refund was released (PayPal) instantly.
miaviator ... Now I've read some of your post and I am glad you are trying to help others from being scammed (or on what seems like permanent wait) because you lost $20k to Butterfly Labs? Stuff like that is appreciated for you to try and help people, but some of your post are just over the top. Before you try to tell me I don't understand that kind of money you should keep in mind until a few months ago I held the record for watercooled 02+ Porsche Turbos in mph in the 1/4 and watercool 6speed 60-130s so I've had times where even though things came through I was out 30-40k for 9-10 months. That's just for the motor LOL! Same with our X275 cars, etc... But do you see me jumping in every thread on 6speed or ls1tech trying to scare people even though a product exist then spouting random shit because the BTMiner crew English isn't the best (and no offense to you all at BTMine). So chill out bro.
Screen shot was taken randomly 5 minutes ago.
Powell 1 = USB Sticks
Powell 2 = Asic Cube
Powell 3 = Asic Cube
Powell 4-7 = BTMiner v1 on stock clock
The people at BTMiner and I talked and the refund was released (PayPal) instantly.
miaviator ... Now I've read some of your post and I am glad you are trying to help others from being scammed (or on what seems like permanent wait) because you lost $20k to Butterfly Labs? Stuff like that is appreciated for you to try and help people, but some of your post are just over the top. Before you try to tell me I don't understand that kind of money you should keep in mind until a few months ago I held the record for watercooled 02+ Porsche Turbos in mph in the 1/4 and watercool 6speed 60-130s so I've had times where even though things came through I was out 30-40k for 9-10 months. That's just for the motor LOL! Same with our X275 cars, etc... But do you see me jumping in every thread on 6speed or ls1tech trying to scare people even though a product exist then spouting random shit because the BTMiner crew English isn't the best (and no offense to you all at BTMine). So chill out bro.
I just increased my order to 14 miners. I'm not happy about the delay, but don't believe they're out to scam anyone.
Hello BTmine
I just purchased 3 more units and sent 7.2 bitcoin, my transaction id is e6f859a0b435b0edd928f1a28f3e2b46cfaa4175a94f169eed7f64849cad54fe-000
I look forward to receiving these additional units and getting them online mining!
Thank you
Mtnminer
So all know Bitmine.ch in Sweden, When I tried yesterday to pay for my 1 th/s preorder awaiting payment in the build cue, Bitmine.ch in Sweden cancelled my order and suggested I resubmit and pay with a projected deliver date of 3rd week in March!
Time is money, so now that money has gone to China, instead of Sweden. Though, I will be hashing 6 weeks sooner with a total
of 1.1 th/s, instead of the total of 1.7 th/s I would have had in March, considering the rate of complexity increase. I will still be ahead.
Dennis
Mtnminer
I just purchased 3 more units and sent 7.2 bitcoin, my transaction id is e6f859a0b435b0edd928f1a28f3e2b46cfaa4175a94f169eed7f64849cad54fe-000
I look forward to receiving these additional units and getting them online mining!
Thank you
Mtnminer
So all know Bitmine.ch in Sweden, When I tried yesterday to pay for my 1 th/s preorder awaiting payment in the build cue, Bitmine.ch in Sweden cancelled my order and suggested I resubmit and pay with a projected deliver date of 3rd week in March!
Time is money, so now that money has gone to China, instead of Sweden. Though, I will be hashing 6 weeks sooner with a total
of 1.1 th/s, instead of the total of 1.7 th/s I would have had in March, considering the rate of complexity increase. I will still be ahead.
Dennis
Mtnminer
The issue is that op agreed to a refund after admitting to fraud.
Then never refunded.
I'll gladly go away and again clear out all these posts.
Once a refund is issued.
Then never refunded.
I'll gladly go away and again clear out all these posts.
Once a refund is issued.
REFUND
SCAMMER
SCAMMER
SCAMMER
WARNING
SCAMMER
SCAMMER
SCAMMER
WARNING
we already refunded to some clients, you can ask them , and did you also buy it ? tell me your information I can refund
Yes please refund this guy off and i'll gladly pay off his order and you can add +100$ tip ontop of that. You may add this to my open order. Thank you for your support.
The issue is that op agreed to a refund after admitting to fraud.
Then never refunded.
I'll gladly go away and again clear out all these posts.
Once a refund is issued.
[/quote]Then never refunded.
I'll gladly go away and again clear out all these posts.
Once a refund is issued.
REFUND
SCAMMER
SCAMMER
SCAMMER
WARNING
SCAMMER
SCAMMER
SCAMMER
WARNING
we already refunded to some clients, you can ask them , and did you also buy it ? tell me your information I can refund
Reserved
depending on your psu can also try this, however the second 24pin connection may not even be needed.
http://www.moddiy.com/products/Seasonic-X-Series-Modular-Power-Supply-PSU-24%252dPin-Single-Sleeved-Cables-(Red%7B47%7DBlack).html
http://www.moddiy.com/products/Seasonic-X-Series-Modular-Power-Supply-PSU-24%252dPin-Single-Sleeved-Cables-(Red%7B47%7DBlack).html
I'm trying to figure out how to use just one PSU to power one of these. I have a 1200w and a 1350w PSU but it seems ridiculous to use both. What about a splitter like this <http://www.atxpowersupplies.com/atx-20-pin-y-splitter.php>? Or, is there a better way to do this?
Got my tracking for my orders. The machines is waiting for pickuping in Hongkong.
They worked hard. Lunar new year comes soon and Chinese people has many things to do.
Please take them 2-3 hours a day for sleeping. They ll deliver product as they gave the deadline.
If not, they ll do a refund. So dont worry so much.
Order date? They worked hard. Lunar new year comes soon and Chinese people has many things to do.
Please take them 2-3 hours a day for sleeping. They ll deliver product as they gave the deadline.
If not, they ll do a refund. So dont worry so much.
Got my tracking for my orders. The machines is waiting for pickuping in Hongkong.
They worked hard. Lunar new year comes soon and Chinese people has many things to do.
Please take them 2-3 hours a day for sleeping. They ll deliver product as they gave the deadline.
If not, they ll do a refund. So dont worry so much.
They worked hard. Lunar new year comes soon and Chinese people has many things to do.
Please take them 2-3 hours a day for sleeping. They ll deliver product as they gave the deadline.
If not, they ll do a refund. So dont worry so much.
Why don't you try just turn on your second PSU with short connecting pin 13 and 14 on ATX connector. You will have 12V on PCIE and CPU connectors which is needed for miner to work.
I'm not sure that miner is using power from ATX connector, only starting it with two pins:
http://files.shroomery.org/files/06-13/376866553-atx_on.gif
I'm not sure that miner is using power from ATX connector, only starting it with two pins:
http://files.shroomery.org/files/06-13/376866553-atx_on.gif
Jump to: