Topic: [Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 2. (Read 187411 times)

Everything looks correct, but your cube isn't able to get in contact with the proxy. Proxy is talking to pool fine. Check for firewalls, and where is your Cube connected to?

Hello everyone, I recently got my hands on an Erupter Cube, now i've hooked it up configured it. And it' s not working. Can you help me out?



http://i1035.photobucket.com/albums/a437/ZangetsuNX01/Cube.jpg

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Netbook-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : zangy.lan
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 100
   Physical Address. . . . . . . . . : 78-92-9C-61-F1-5A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
   Physical Address. . . . . . . . . : E8-9A-8F-E2-0E-36
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::41a9:c224:c7f9:ebf8%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 241232745
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-3D-0D-BD-E8-9A-8F-E2-0E-36
   DNS Servers . . . . . . . . . . . : 10.0.0.1
                                       8.8.8.8
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.zangy.lan:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:20b8:316e:f5ff:fffc(Preferred)
   Link-local IPv6 Address . . . . . : fe80::20b8:316e:f5ff:fffc%13(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

http://i1035.photobucket.com/albums/a437/ZangetsuNX01/proxy.jpg

If you need more info please let me know.

Thanks, I will..  the seller suggested that i needed a stratum proxy, but I didn't have any issues with the previous cube I bought from the same seller (and the stratum proxy has been working properly with my blades also).

I suggest taking some pics when you take it apart.  If anything looks kinda weird, post them here.  If its possible, I'm sure someone here will be able to help you fix it.

I bought it off a tradera auction so I don't it's any point trying to get a refund from the seller, considering it was cheap (and probably no warranty)
Might aswell take it apart and see if i can manage to fix it.

Then the cube is dead, as its a power related issue. Nothing you can do from your end, so send it back to your reseller / ASICMiner if its still under warranty. If not, sell it for parts or try and find someone local to have a look inside, there might be a component which is obviously fried and could be replaced. But at $20 market value its probably not worth it.

Tried it with both a CX500 and a HX1000.. same problem. Don't have my other cubes at home so I can't compare

Edit: Corsair

Check the power supply

I'm having an issue with one of my cubes.. not sure what to do about it :/

https://dl.dropboxusercontent.com/u/63721262/bilder/dumpert/damp.jpg

I'm sorry, I just use Google translator and English is very bad I know, so I find it easier to ask than to find a topic.

Not sure what you're asking... instructions are in the OP.

Hi
How do I configure the device with the windows client, the device showed it to the client, not in the dos window.

Any sha256

Hi

Under this miner is still possible to set up, except for mining bitcoin?

Borrow someones laptop and test.

hey dogie

me again.. I've run into some trouble with the lan not detecting the cubes.. ever come across this with the cubes before?

https://bitcointalksearch.org/topic/m.7699959

thanks

Added anchor links to contents, moved text within picture margins.

thanks dogie

Same, makes no difference.

hey dogie
fantastic write up, but quick question you said the 750w psu for 2 cubes..what about chucking a hexminer in there too?what would be the best psu and is it advisable to run a different piece of equiptment with the cubes?
thanks